Poly(lactic acid) (PLA)/Poly(butylene succinate-co-adipate) (PBSA) Compatibilized Binary Biobased Blends: Melt Fluidity, Morphological, Thermo-Mechanical and Micromechanical Analysis

Thermal, Mechanical and Micromechanical Analysis of PLA/PBAT/POE-g-GMA Extruded Ternary Blends

(2020) Laura Aliotta et al.   Frontiers in Materials

Improved Impact Properties in Poly(lactic acid) (PLA) Blends Containing Cellulose Acetate (CA) Prepared by Reactive Extrusion

(2019) Maria-Beatrice Coltelli et al.   Materials

Toughened Poly(Lactic Acid)—PLA Formulations by Binary Blends with Poly(Butylene Succinate-co-Adipate)—PBSA and Their Shape Memory Behaviour

(2019) Diego Lascano et al.   Materials

Reactive Compatibilization of PLA/PA11 Blends and Their Application in Additive Manufacturing

(2019) Damien Rasselet et al.   Materials

The effect of poly(butylene succinate) content on the structure, thermal and mechanical properties of its blends with polylactide

(2019) Justyna Ostrowska et al.   POLYMER INTERNATIONAL

Rubber Toughening of Polylactic Acid (PLA) with Poly(butylene adipate-co-terephthalate) (PBAT): Mechanical Properties, Fracture Mechanics and Analysis of Ductile-to-Brittle Behavior while Varying Temperature and Test Speed

(2019) Vito Gigante et al.   EUROPEAN POLYMER JOURNAL

Crystallization and self-nucleation of PLA, PBS and PCL in their immiscible binary and ternary blends

(2019) Seif Eddine Fenni et al.   THERMOCHIMICA ACTA

Polylactide (PLA) and Its Blends with Poly(butylene succinate) (PBS): A Brief Review

(2019) Shen Su et al.   Polymers

Mechanical properties, rheological behaviors, and phase morphologies of high-toughness PLA/PBAT blends by in-situ reactive compatibilization

(2019) Xin Wang et al.   COMPOSITES PART B-ENGINEERING

Thermo-Mechanical Properties of PLA/Short Flax Fiber Biocomposites

(2019) Laura Aliotta et al.   Applied Sciences-Basel

Preparation, microstructure and performance of poly (lactic acid)-Poly (butylene succinate-co-butyleneadipate)-starch hybrid composites

(2019) Linghan Meng et al.   COMPOSITES PART B-ENGINEERING

Flat Die Extruded Biocompatible Poly(Lactic Acid) (PLA)/Poly(Butylene Succinate) (PBS) Based Films

(2019) Vito Gigante et al.   Polymers

Ductility improvements of PLA-based binary and ternary blends with controlled morphology using PBAT, PBSA, and nanoclay

(2019) Mohammadreza Nofar et al.   COMPOSITES PART B-ENGINEERING

Polylactic acid blends: the future of green, light and tough

(2018) Kotiba Hamad et al.   PROGRESS IN POLYMER SCIENCE

Poly(lactic acid) (PLA) Based Tear Resistant and Biodegradable Flexible Films by Blown Film Extrusion

(2018) Norma Mallegni et al.   Materials

Eco-Efficiency Assessment of Bioplastics Production Systems and End-of-Life Options

(2018) Kunnika Changwichan et al.   Sustainability

High toughness poly(lactic acid) (PLA) formulations obtained by ternary blends with poly(3-hydroxybutyrate) (PHB) and flexible polyesters from succinic acid

(2018) M. J. Garcia-Campo et al.   POLYMER BULLETIN

Rigid filler toughening in PLA-Calcium Carbonate composites: effect of particle surface treatment and matrix plasticization

(2018) Laura Aliotta et al.   EUROPEAN POLYMER JOURNAL

In Situ Compatibilization of Biopolymer Ternary Blends by Reactive Extrusion with Low-Functionality Epoxy-Based Styrene–Acrylic Oligomer

(2018) L. Quiles-Carrillo et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

Mechanical and bead foaming behavior of PLA-PBAT and PLA-PBSA blends with different morphologies

(2017) M. Nofar et al.   EUROPEAN POLYMER JOURNAL

Effect of nucleating agents on crystallinity and properties of poly (lactic acid) (PLA)

(2017) Laura Aliotta et al.   EUROPEAN POLYMER JOURNAL

Degradation of polymer blends: A brief review

(2017) F.P. La Mantia et al.   POLYMER DEGRADATION AND STABILITY

Poly( l -lactide- b -butylene succinate- b - l -lactide) triblock copolymer: A multi-functional additive for PLA/PBS blend with a key performance on film clarity

(2017) Raksit Supthanyakul et al.   POLYMER DEGRADATION AND STABILITY

Investigation of Thermal and Thermomechanical Properties of Biodegradable PLA/PBSA Composites Processed via Supercritical Fluid-Assisted Foam Injection Molding

(2017) Sai Pradeep et al.   Polymers

Random poly(butylene succinate- co -lactic acid) as a multi-functional additive for miscibility, toughness, and clarity of PLA/PBS blends

(2016) Raksit Supthanyakul et al.   POLYMER

Interfacial and rheological properties of PLA/PBAT and PLA/PBSA blends and their morphological stability under shear flow

(2015) M. Nofar et al.   JOURNAL OF RHEOLOGY

Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise

(2015) S. Agnelli et al.   POLYMER TESTING

Influence of chain extender on mechanical, thermal and morphological properties of blown films of PLA/PBAT blends

(2015) Liliane Cardoso Arruda et al.   POLYMER TESTING

Biodegradable Poly(butylene succinate) and Poly(butylene adipate-co-terephthalate) Blends: Reactive Extrusion and Performance Evaluation

(2014) Rajendran Muthuraj et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

Effect of a chain extender on the rheological and mechanical properties of biodegradable poly(lactic acid)/poly[(butylene succinate)-co-adipate] blends

(2013) Hassan Eslami et al.   JOURNAL OF APPLIED POLYMER SCIENCE

On the determination of the point of fracture initiation by the load separation criterion in J-testing of ductile polymers

(2013) Francesco Baldi et al.   POLYMER TESTING

Recent advances in high performance poly(lactide): from “green” plasticization to super-tough materials via (reactive) compounding

(2013) Georgio Kfoury et al.   Frontiers in Chemistry

A tentative application of the energy separation principle to the determination of the fracture resistance (JIc) of rubbers

(2012) S. Agnelli et al.   ENGINEERING FRACTURE MECHANICS

Interfacial Properties, Viscoelasticity, and Thermal Behaviors of Poly(butylene succinate)/Polylactide Blend

(2012) Defeng Wu et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Morphology and melt rheology of biodegradable poly(lactic acid)/poly(butylene succinate adipate) blends: effect of blend compositions

(2012) Zong-yan Gui et al.   IRANIAN POLYMER JOURNAL

The crystallization behavior and mechanical properties of polylactic acid in the presence of a crystal nucleating agent

(2012) Zhaobin Tang et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Utilization of peanut husks as a filler in aliphatic–aromatic polyesters: Preparation, characterization, and biodegradability

(2012) Chin-San Wu   POLYMER DEGRADATION AND STABILITY

Control of thermal degradation of polylactide/clay nanocomposites during melt processing by chain extension reaction

(2012) Qingkai Meng et al.   POLYMER DEGRADATION AND STABILITY

Improvement of thermal stability, rheological and mechanical properties of PLA, PBAT and their blends by reactive extrusion with functionalized epoxy

(2012) Racha Al-Itry et al.   POLYMER DEGRADATION AND STABILITY

Biodegradable Polymers- A Review on Recent Trends and Emerging Perspectives

(2011) Gisha E. Luckachan et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

Mechanical properties and morphology of biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends compatibilized by transesterification

(2011) Shan Lin et al.   MATERIALS & DESIGN

Compatible blends of biorelated polyesters through catalytic transesterification in the melt

(2011) Maria-Beatrice Coltelli et al.   POLYMER DEGRADATION AND STABILITY

Melt strengthening of poly (lactic acid) through reactive extrusion with epoxy-functionalized chains

(2011) Yves-Marie Corre et al.   RHEOLOGICA ACTA

Effect of glycidyl methacrylate (GMA) on the thermal, mechanical and morphological property of biodegradable PLA/PBAT blend and its nanocomposites

(2010) Mukesh Kumar et al.   BIORESOURCE TECHNOLOGY

On the applicability of the load separation criterion in determining the fracture resistance (J Ic) of ductile polymers at low and high loading rates

(2010) Francesco Baldi et al.   INTERNATIONAL JOURNAL OF FRACTURE

Cocontinuous phase morphology of asymmetric compositions of polypropylene/high-density polyethylene blend by the addition of clay

(2010) Anup K. Dhibar et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Preparation, Mechanical, and Thermal Properties of Biodegradable Polyesters/Poly(Lactic Acid) Blends

(2010) Peng Zhao et al.   Journal of Nanomaterials

Effect of the Recycling and Annealing on the Mechanical and Fracture Properties of Poly(Lactic Acid)

(2010) L. Nascimento et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

The effect of free radical reactions on structure and properties of poly(lactic acid) (PLA) based blends

(2009) Maria-Beatrice Coltelli et al.   POLYMER DEGRADATION AND STABILITY

Microcellular extrusion-foaming of polylactide with chain-extender

(2009) Srikanth Pilla et al.   POLYMER ENGINEERING AND SCIENCE

Biodegradable Polymers

(2009) Isabelle Vroman et al.   Materials

Melt rheology of polylactide/poly(butylene adipate-co-terephthalate) blends

(2008) Shu-Ying Gu et al.   CARBOHYDRATE POLYMERS

Structure and properties for biomass-based polyester blends of PLA and PBS

(2008) Tadashi Yokohara et al.   EUROPEAN POLYMER JOURNAL

Reactive compatibilization of biodegradable poly(lactic acid)/poly(ɛ-caprolactone) blends with reactive processing agents

(2008) Masaki Harada et al.   POLYMER ENGINEERING AND SCIENCE

Influence of compatibilizer precursor structure on the phase distribution of low density poly(ethylene) in a poly(ethylene terephthalate) matrix

(2008) Maria-Beatrice Coltelli et al.   POLYMER ENGINEERING AND SCIENCE

Toughening modification of PLLA/PBS blends via in situ compatibilization

(2008) Ruyin Wang et al.   POLYMER ENGINEERING AND SCIENCE