3S (sonication, surfactant, stability) impact on the viscosity of hybrid nanofluid with different base fluids: An experimental study

Stability, thermal performance and artificial neural network modeling of viscosity and thermal conductivity of Al2O3-ethylene glycol nanofluids

(2020) Long Li et al.   POWDER TECHNOLOGY

Heat transfer enhancement with nanofluids in plate heat exchangers: A comprehensive review

(2020) Naimish S. Pandya et al.   EUROPEAN JOURNAL OF MECHANICS B-FLUIDS

Stability of nanofluid: A review

(2020) Samarshi Chakraborty et al.   APPLIED THERMAL ENGINEERING

Preparation, characterization, stability, and thermal conductivity of rGO-Fe3O4-TiO2 hybrid nanofluid: An experimental study

(2020) Nese Keklikcioglu Cakmak et al.   POWDER TECHNOLOGY

Energy, efficiency, economic impact, and heat transfer aspects of solar flat plate collector with Al2O3 nanofluids and wire coil with core rod inserts

(2020) L. Syam Sundar et al.   Sustainable Energy Technologies and Assessments

Influence of Al2O3 nanoparticle and Y-shaped fins on melting and solidification of paraffin

(2020) A. Nematpour Keshteli et al.   JOURNAL OF MOLECULAR LIQUIDS

Heat Transfer of rGO/CO3O4 Hybrid Nanomaterial-Based Nanofluids and Twisted Tape Configurations in a Tube

(2020) L. Syam Sundar et al.   Journal of Thermal Science and Engineering Applications

Experimental comparison of specific heat capacity of three different metal oxides with MWCNT/ water-based hybrid nanofluids: proposing a new correlation

(2020) Arun Kumar Tiwari et al.   Applied Nanoscience

4S consideration (synthesis, sonication, surfactant, stability) for the thermal conductivity of CeO2 with MWCNT and water based hybrid nanofluid: An experimental assessment

(2020) Arun Kumar Tiwari et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Central versus off-grid photovoltaic system, the optimum option for the domestic sector based on techno-economic-environmental assessment for United Arab Emirates

(2020) Zafar Said et al.   Sustainable Energy Technologies and Assessments

Melting of phase change materials in a trapezoidal cavity: Orientation and nanoparticles effects

(2019) Farida Iachachene et al.   JOURNAL OF MOLECULAR LIQUIDS

Investigation of thermal conductivity of a new hybrid nanofluids based on mesoporous silica modified with copper nanoparticles: Synthesis, characterization and experimental study

(2019) Rashid Pourrajab et al.   JOURNAL OF MOLECULAR LIQUIDS

Effect of geometrical parameters on natural convection in a porous undulant-wall enclosure saturated by a nanofluid using Buongiorno's model

(2018) Gholamreza Hoghoughi et al.   JOURNAL OF MOLECULAR LIQUIDS

Synthesis of metal-based nanofluids and their thermo-hydraulic performance in compact heat exchanger with multi-louvered fins working under laminar conditions

(2018) Vinay Kumar et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Numerical investigation of rectangular thermal energy storage units with multiple phase change materials

(2018) S. Hoseinzadeh et al.   JOURNAL OF MOLECULAR LIQUIDS

Viscosity and rheological properties of antifreeze based nanofluid containing hybrid nano-powders of MWCNTs and TiO2 under different temperature conditions

(2018) Mohammad Hemmat Esfe et al.   POWDER TECHNOLOGY

Experimental investigation and develop ANNs by introducing the suitable architectures and training algorithms supported by sensitivity analysis: Measure thermal conductivity and viscosity for liquid paraffin based nanofluid containing Al2O3 nanoparticles

(2018) Amin Shahsavar et al.   JOURNAL OF MOLECULAR LIQUIDS

Effects of temperature and solid volume fraction on viscosity of SiO 2 -MWCNTs/SAE40 hybrid nanofluid as a coolant and lubricant in heat engines

(2016) Masoud Afrand et al.   APPLIED THERMAL ENGINEERING

Effect of suspending hybrid nano-additives on rheological behavior of engine oil and pumping power

(2016) Ebrahim Dardan et al.   APPLIED THERMAL ENGINEERING

Thermal conductivity, viscosity and stability of Al 2 O 3 -diathermic oil nanofluids for solar energy systems

(2016) Gianpiero Colangelo et al.   ENERGY

Preparation and evaluation of stable nanofluids for heat transfer application: A review

(2016) Babita et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Investigation on the stability, viscosity and extinction coefficient of CuO–Al 2 O 3 /Water binary mixture nanofluid

(2016) Amir Menbari et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Effects of temperature and particles concentration on the dynamic viscosity of MgO-MWCNT/ethylene glycol hybrid nanofluid: Experimental study

(2016) Omid Soltani et al.   PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES

Rheological behaviour of nanofluids: A review

(2016) Anuj Kumar Sharma et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Particle concentration levels of various nanofluids in plate heat exchanger for best performance

(2015) Arun Kumar Tiwari et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Heat transfer and pressure drop characteristics of CeO2/water nanofluid in plate heat exchanger

(2013) Arun Kumar Tiwari et al.   APPLIED THERMAL ENGINEERING

The influence of surfactant and ultrasonic processing on improvement of stability, thermal conductivity and viscosity of titania nanofluid

(2013) Azadeh Ghadimi et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Thermal performance of multi-walled carbon nanotubes (MWCNTs) in aqueous suspensions with surfactants SDBS and SDS

(2012) Kuerbanjiang Wusiman et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Thermal conductivity measurement of methanol-based nanofluids with Al2O3 and SiO2 nanoparticles

(2012) Changwei Pang et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

A critical synthesis of thermophysical characteristics of nanofluids

(2011) Khalil Khanafer et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER