AC loss and contact resistance of different CICC cable patterns: Experiments and numerical modeling

Status of CORC® cables and wires for use in high-field magnets and power systems a decade after their introduction

(2019) Danko C van der Laan et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

A review of commercial high temperature superconducting materials for large magnets: from wires and tapes to cables and conductors

(2019) D Uglietti   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

Strand level modeling of contact resistance and coupling loss for EU-DEMO-TF prototype conductors

(2019) Tommaso Bagni et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

Progressing in cable-in-conduit for fusion magnets: from ITER to low cost, high performance DEMO

(2018) D Uglietti et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

Overview of the present progress and activities on the CFETR

(2017) Yuanxi Wan et al.   NUCLEAR FUSION

First AC loss test and analysis of a Bi2212 cable-in-conduit conductor for fusion application

(2017) Jinggang Qin et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

New design of cable-in-conduit conductor for application in future fusion reactors

(2017) Jinggang Qin et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

Analysis of ITER NbTi and Nb3Sn CICCs experimental minimum quench energy with JackPot, MCM and THEA models

(2017) T Bagni et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

Metallographic autopsies of full-scale ITER prototype cable-in-conduit conductors after full cyclic testing in SULTAN: III. The importance of strand surface roughness in long twist pitch conductors

(2016) Charlie Sanabria et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

Cable-in-conduit conductors: lessons from the recent past for future developments with low and high temperature superconductors

(2015) L Muzzi et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

Current transfer length in multi-filamentary superconducting NbTi and Nb3Sn strands; experiments and models

(2014) C Zhou et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

Optimization of Interstrand Coupling Loss and Transverse Load Degradation in ITER $\hbox{Nb}_{3}\hbox{Sn}$ CICCs

(2013) A. Nijhuis et al.   IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY

Status of Conductor Qualification for the ITER Central Solenoid

(2013) A. Devred et al.   IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY

Cabling Technology of $\hbox{Nb}_{3}\hbox{Sn}$ Conductor for ITER Central Solenoid

(2013) Y. Takahashi et al.   IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY

Minimizing coupling loss by selection of twist pitch lengths in multi-stage cable-in-conduit conductors

(2013) G Rolando et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

Monitoring of the Thermal Strain Distribution in CICCs During the Cyclic Loading Tests in SULTAN

(2012) C. Calzolaio et al.   IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY

Evidence that filament fracture occurs in an ITER toroidal field conductor after cyclic Lorentz force loading in SULTAN

(2012) Carlos Sanabria et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

Results of the TF conductor performance qualification samples for the ITER project

(2012) M Breschi et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

First Results of AC Loss Test on ITER TF Conductors With Transverse Load Cycling

(2011) Y. Miyoshi et al.   IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY

Test Results and Investigation of Tcs Degradation in Japanese ITER CS Conductor Samples

(2011) T. Hemmi et al.   IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY

The ITER Magnets: Design and Construction Status

(2011) N. Mitchell et al.   IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY

Optimization of ITER Nb3Sn CICCs for coupling loss, transverse electromagnetic load and axial thermal contraction

(2011) A Nijhuis et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

Validation of a strand-level CICC-joint coupling loss model

(2011) E P A van Lanen et al.   SUPERCONDUCTOR SCIENCE & TECHNOLOGY

A macroscopic model for coupling current losses in cables made of multistages of superconducting strands and its experimental validation

(2010) B. Turck et al.   CRYOGENICS

Status and prospect of the JT-60SA project

(2010) S. Ishida et al.   FUSION ENGINEERING AND DESIGN

Microscopic Fractures and Transport Degradation in ITER Type ${\hbox {Nb}}_{3}{\hbox {Sn}}$ Strands

(2010) Y Miyoshi et al.   IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY

The Superconducting Magnets for EAST Tokamak

(2010) J Wei et al.   IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY

$\hbox{MgB}_{2}$ Coil Options for Fusion Poloidal Magnets

(2010) Giovanni Giunchi et al.   IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY

JackPot: A novel model to study the influence of current non-uniformity and cabling patterns in cable-in-conduit conductors

(2009) E.P.A. van Lanen et al.   CRYOGENICS

Test Results From the PF Conductor Insert Coil and Implications for the ITER PF System

(2009) D. Bessette et al.   IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY

Qualification tests for ITER TF conductors in SULTAN

(2008) P. Bruzzone et al.   FUSION ENGINEERING AND DESIGN

Review of the Results of the ITER Toroidal Field Conductor R&D and Qualification

(2008) D. Bessette et al.   IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY

A solution for transverse load degradation in ITER Nb3Sn CICCs: verification of cabling effect on Lorentz force response

(2008) A Nijhuis   SUPERCONDUCTOR SCIENCE & TECHNOLOGY