K Ic and K IIc measurement for hot mix asphalt mixtures at low temperature: Experimental and theoretical study using the semicircular bend specimen with different thicknesses

Fracture resistance study for hot mix asphalt mixture under out of plane sliding mode

(2020) M.R.M. Aliha et al.   ENGINEERING FRACTURE MECHANICS

An extended edge-notched disc bend (ENDB) specimen for mixed-mode I+II fracture assessments

(2020) A. Bahmani et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Effect of bitumen type, temperature and aging on mixed I/II fracture toughness of asphalt binders-Experimental and theoretical assessment

(2020) MRM. Aliha et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

The Effect of ENDB Specimen Geometry on Mode I Fracture Toughness and Fracture Energy of HMA and SMA Mixtures at Low Temperatures

(2019) M.R. Eghbali et al.   ENGINEERING FRACTURE MECHANICS

Aging effect on combined mode fracture resistance of bitumen

(2019) Saied Shaker et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Using the generalized maximum tangential stress criterion to predict mode II fracture of hot mix asphalt in terms of mode I results – A statistical analysis

(2019) H.R. Fattahi Amirdehi et al.   CONSTRUCTION AND BUILDING MATERIALS

An insight into mode II fracture toughness testing using SCB specimen

(2019) Bahador Bahrami et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Crack initiation angles and propagation paths in polyurethane foams under mixed modes I/II and I/III loading

(2019) M.R.M. Aliha et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Thickness effect on the mode III fracture resistance and fracture path of rock using ENDB specimens

(2019) Jamal Bidadi et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Evaluation of temperature and loading rate effect on fracture toughness of fiber reinforced asphalt mixture using edge notched disc bend (ENDB) specimen

(2019) Hamed Motamedi et al.   CONSTRUCTION AND BUILDING MATERIALS

Heterogeneity effects on mixed‐mode I/II stress intensity factors and fracture path of laboratory asphalt mixtures in the shape of SCB specimen

(2019) M.R.M. Aliha et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Pure mode II fracture analysis of dissimilar Al-Al and Al-Cu friction stir welded joints using the generalized MTS criterion

(2019) A.R. Torabi et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Modes I and II stress intensity factors of semi-circular bend specimen computed for two-phase aggregate/mastic asphalt mixtures

(2019) M.R.M. Aliha et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Effect of specimen thickness on the fracture resistance of hot mix asphalt in the disk-shaped compact tension (DCT) configuration

(2018) Calvin M. Stewart et al.   CONSTRUCTION AND BUILDING MATERIALS

Evaluating the effect of macro-synthetic fibre on the mechanical properties of roller-compacted concrete pavement using response surface methodology

(2018) H. Rooholamini et al.   CONSTRUCTION AND BUILDING MATERIALS

Evaluation of pure and mixed modes (I/III) fracture toughness of Portland cement concrete mixtures containing reclaimed asphalt pavement

(2018) Ahmad Mansourian et al.   CONSTRUCTION AND BUILDING MATERIALS

Evaluating mode I fracture resistance in asphalt mixtures using edge notched disc bend ENDB specimen with different geometrical and environmental conditions

(2018) P.J. Haghighat Pour et al.   ENGINEERING FRACTURE MECHANICS

Mixed mode tensile – In plane shear fracture energy determination for hot mix asphalt mixtures under intermediate temperature conditions

(2018) M. Fakhri et al.   ENGINEERING FRACTURE MECHANICS

EMTSN criterion for evaluating mixed mode I/II crack propagation in rock materials

(2018) M.M. Mirsayar et al.   ENGINEERING FRACTURE MECHANICS

Fracture properties of hybrid fibre-reinforced roller-compacted concrete in mode I with consideration of possible kinked crack

(2018) H. Rooholamini et al.   CONSTRUCTION AND BUILDING MATERIALS

Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen

(2018) M.R.M. Aliha et al.   CONSTRUCTION AND BUILDING MATERIALS

Low temperature fracture toughness study for bitumen under mixed mode I + II loading condition

(2018) M.R.M. Aliha et al.   ENGINEERING FRACTURE MECHANICS

Fracture prediction of rocks under mode I and mode II loading using the generalized maximum tangential strain criterion

(2017) Ming-Dong Wei et al.   ENGINEERING FRACTURE MECHANICS

Crack behavior analysis of roller compacted concrete mixtures containing reclaimed asphalt pavement and crumb rubber

(2017) Mansour Fakhri et al.   ENGINEERING FRACTURE MECHANICS

On the low temperature mixed mode fracture analysis of asphalt binder – Theories and experiments

(2017) M.M. Mirsayar   ENGINEERING FRACTURE MECHANICS

Analyzing of Wedge Splitting Test on Asphalt Pavement Using Optical Measurements

(2017) A. Jamaaoui et al.   JOURNAL OF TESTING AND EVALUATION

Mixed mode I/II fracture investigation of Perspex based on the averaged strain energy density criterion

(2017) M. R. M. Aliha et al.   Physical Mesomechanics

Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend specimens

(2017) S.M.J. Razavi et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Mixed mode I/II fracture investigation of Perspex based on the averaged strain energy density criterion

(2017) M. R. M. Aliha et al.   Physical Mesomechanics

Strain-based criteria for mixed-mode fracture of polycrystalline graphite

(2016) M.M. Mirsayar et al.   ENGINEERING FRACTURE MECHANICS

Mixed mode fracture toughness testing of PMMA with different three-point bend type specimens

(2016) M.R.M. Aliha et al.   EUROPEAN JOURNAL OF MECHANICS A-SOLIDS

Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents

(2016) M. R. M. Aliha et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes

(2016) M. Ameri et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

A novel test specimen for investigating the mixed mode I+III fracture toughness of hot mix asphalt composites – Experimental and theoretical study

(2016) M.R.M. Aliha et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Characterization of Low Temperature Crack Resistance of Crumb Rubber Modified Asphalt Mixtures Using Semi-Circular Bending Tests

(2016) Hainian Wang et al.   JOURNAL OF TESTING AND EVALUATION

Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures

(2015) M.R.M. Aliha et al.   CONSTRUCTION AND BUILDING MATERIALS

Shear and mode II fracture of PUR foams

(2015) Liviu Marsavina et al.   ENGINEERING FAILURE ANALYSIS

A generalized strain energy density criterion for mixed mode fracture analysis in brittle and quasi-brittle materials

(2015) M.R. Ayatollahi et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Determination of mode III fracture toughness for different materials using a new designed test configuration

(2015) M.R.M. Aliha et al.   MATERIALS & DESIGN

Mixed mode fracture analysis using extended maximum tangential strain criterion

(2015) M.M. Mirsayar   MATERIALS & DESIGN

Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures

(2014) M.R.M. Aliha et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of load application rate and temperature on the fracture energy of asphalt mixtures. Fénix and semi-circular bending tests

(2013) Félix Pérez-Jiménez et al.   CONSTRUCTION AND BUILDING MATERIALS

Investigation of Mixed Mode I/II Brittle Fracture Using ASCB Specimen

(2013) Radu Negru et al.   INTERNATIONAL JOURNAL OF FRACTURE

Rock fracture toughness study using cracked chevron notched Brazilian disc specimen under pure modes I and II loading – A statistical approach

(2013) M.R.M. Aliha et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Mixed mode fracture resistance of asphalt concrete mixtures

(2012) M. Ameri et al.   ENGINEERING FRACTURE MECHANICS

Modeling Mode I Fracture of Bitumen Films

(2012) O. Portillo et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Effect of Factors Affecting Fracture Energy of Asphalt Concrete at Low Temperature

(2012) Xinjun Li et al.   Road Materials and Pavement Design

Laboratory Mixed-Mode Cracking of Asphalt Concrete Using the Single-Edge Notch Beam

(2012) Andrew Braham et al.   Road Materials and Pavement Design

Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading

(2010) M.R.M. Aliha et al.   ENGINEERING FRACTURE MECHANICS

An improved semi-circular bend specimen for investigating mixed mode brittle fracture

(2010) M.R. Ayatollahi et al.   ENGINEERING FRACTURE MECHANICS

Using Semi Circular Bending Test to Evaluate Low Temperature Fracture Resistance for Asphalt Concrete

(2009) X.-J. Li et al.   EXPERIMENTAL MECHANICS

Brittle fracture evaluation of a fine grain cement mortar in combined tensile-shear deformation

(2009) M. R. M. ALIHA et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Mode II Brittle Fracture Assessment Using ASFPB Specimen

(2009) M. R. M. Aliha et al.   INTERNATIONAL JOURNAL OF FRACTURE

Micromechanical fracture modeling of asphalt concrete using a single-edge notched beam test

(2008) Hyunwook Kim et al.   MATERIALS AND STRUCTURES