A fracture-based approach to characterize long-term performance of asphalt mixes under moisture and freeze-thaw conditions

Laboratory investigations on fracture toughness of asphalt concretes reinforced with carbon and kenaf fibers

(2020) S. Pirmohammad et al.   ENGINEERING FRACTURE MECHANICS

A review of the warm mix asphalt (WMA) technologies: Effects on thermo-mechanical and rheological properties

(2020) Ali Behnood   JOURNAL OF CLEANER PRODUCTION

Corrigendum to “Laboratory investigations on fracture resistance of asphalt concretes reinforced with carbon and kenaf fibers at −15 °C” [Eng. Fract. Mech. 226 (2020) 106875]

(2020) S. Pirmohammad et al.   ENGINEERING FRACTURE MECHANICS

A state of the art of semi-flexible pavements: Introduction, design, and performance

(2020) Abolfazl Hassani et al.   CONSTRUCTION AND BUILDING MATERIALS

Full-field measurement and fracture and fatigue characterizations of asphalt concrete based on the SCB test and stereo-DIC

(2020) Fang Yuan et al.   ENGINEERING FRACTURE MECHANICS

Effect of moisture and freeze-thaw damage on microwave healing of asphalt mixes

(2020) Amir Kavussi et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of aging level on induced heating-healing properties of asphalt mixes

(2020) Saeed Amani et al.   CONSTRUCTION AND BUILDING MATERIALS

Correlation between asphalt concrete induced healing and rheological properties of asphalt binder

(2020) Hamid Jahanbakhsh et al.   CONSTRUCTION AND BUILDING MATERIALS

Moisture Susceptibility of Asphalt Mixtures: Thermodynamic Evaluation of the Effects of Antistripping Additives

(2020) Mahmoud Ameri et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Sustainable asphalt concrete containing high reclaimed asphalt pavements and recycling agents: Performance assessment, cost analysis, and environmental impact

(2019) Hamid Jahanbakhsh et al.   JOURNAL OF CLEANER PRODUCTION

Evaluation of the durability and the performance of an asphalt mix involving Aramid Pulp Fiber (APF): Complex modulus before and after freeze-thaw cycles, fatigue, and TSRST tests

(2018) Saeed Badeli et al.   CONSTRUCTION AND BUILDING MATERIALS

Induction heating and healing of carbon black modified asphalt concrete under microwave radiation

(2018) Hamid Jahanbakhsh et al.   CONSTRUCTION AND BUILDING MATERIALS

Induced heating-healing characterization of activated carbon modified asphalt concrete under microwave radiation

(2018) Mohammad M. Karimi et al.   CONSTRUCTION AND BUILDING MATERIALS

Mixed mode tensile – In plane shear fracture energy determination for hot mix asphalt mixtures under intermediate temperature conditions

(2018) M. Fakhri et al.   ENGINEERING FRACTURE MECHANICS

Complex Modulus and Fatigue Analysis of Asphalt Mix after Daily Rapid Freeze-Thaw Cycles

(2018) Saeed Badeli et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Morphology, rheology, and physical properties of polymer-modified asphalt binders

(2018) Ali Behnood et al.   EUROPEAN POLYMER JOURNAL

Pavement Performance Investigation of Nano-TiO2/CaCO3 and Basalt Fiber Composite Modified Asphalt Mixture under Freeze‒Thaw Cycles

(2018) Yafeng Gong et al.   Applied Sciences-Basel

The influence of natural and synthetic fibers on low temperature mixed mode I + II fracture behavior of warm mix asphalt (WMA) materials

(2017) M.R.M. Aliha et al.   ENGINEERING FRACTURE MECHANICS

Characterizing air void effect on fracture of asphalt concrete at low-temperature using discrete element method

(2017) Jiaolong Ren et al.   ENGINEERING FRACTURE MECHANICS

Fracture properties of asphalt mixtures using semi-circular bending test: A state-of-the-art review and future research

(2016) Gourab Saha et al.   CONSTRUCTION AND BUILDING MATERIALS

Determination of double-K fracture parameters using semi-circular bend test specimens

(2016) Shilang Xu et al.   ENGINEERING FRACTURE MECHANICS

Study on fracture behavior of HMA mixtures under mixed mode I/III loading

(2016) S. Pirmohammad et al.   ENGINEERING FRACTURE MECHANICS

Experimental and numerical investigation of low-temperature performance of modified asphalt binders and mixtures

(2016) H. Jahanbakhsh et al.   Road Materials and Pavement Design

Laboratory investigation of hot mix asphalt containing waste materials

(2016) Mahyar Arabani et al.   Road Materials and Pavement Design

Laboratory investigation of the characteristics of SMA mixtures under freeze–thaw cycles

(2015) Kezhen Yan et al.   COLD REGIONS SCIENCE AND TECHNOLOGY

Laboratory study of the long-term climatic deterioration of asphalt mixtures

(2015) Miguel Sol-Sánchez et al.   CONSTRUCTION AND BUILDING MATERIALS

Characterization of Fracture Properties of Asphalt Mixtures as Measured by Semicircular Bend Test and Indirect Tension Test

(2013) Minkyum Kim et al.   TRANSPORTATION RESEARCH RECORD

Investigation of certain engineering characteristics of asphalt concrete exposed to freeze–thaw cycles

(2012) Ercan Özgan et al.   COLD REGIONS SCIENCE AND TECHNOLOGY

A review of state of the art on stripping phenomenon in asphalt concrete

(2012) Amir Mehrara et al.   CONSTRUCTION AND BUILDING MATERIALS

Mixed mode fracture resistance of asphalt concrete mixtures

(2012) M. Ameri et al.   ENGINEERING FRACTURE MECHANICS

Modeling and evaluation of the cracking resistance of asphalt mixtures using the semi-circular bending test at intermediate temperatures

(2012) Mostafa A. Elseifi et al.   Road Materials and Pavement Design