Ultrahigh-Resolution 3D Imaging for Quantifying the Pore Nanostructure of Shale and Predicting Gas Transport

The pore and fracture microstructures are key to understanding gas flow in shales. The experimental determination of these microstructures is dependent on the measurement technique employed and its resolution. High-resolution three-dimensional imaging techniques coupled with image analysis and numerical simulations have been employed to characterize the petrophysical properties of shale samples. In this work, our particular focus is on using the Nano-CT and focused ion beam scanning electron microscopy (FIB-SEM) techniques at the same location in a shale rock sample to investigate the effect of their different resolutions and fields of view on the resulting imaged nanopore structure, as well as to determine any differences in the consequent measurements of the shale petrophysical properties. These petrophysical properties include porosity, permeability, pore volume and size distribution, the pore aspect ratio, the surface area to volume, and pore connectivity. The reconstructed matrix, kerogen, and pore space volumes from each approach showed significant scale-dependent differences in the microstructure. The shale sample displayed a high kerogen content with high connectivity. Porosity from the reconstructed shale volumes was observed to be 0.43 and 0.7% for FIB-SEM and Nano-CT approaches, respectively. The pore volume, size, surface area to volume ratio, and two orthogonal pore aspect ratio distributions have also been determined from the reconstructed image data by three-dimensional (3D) image analysis. These data show that voids within the rock are oblate at all scales. Permeabilities have been calculated from both the FIB-SEM and Nano-CT images and fall in the range of 2.55-9.92 nD. A simulation has also been produced based on the permeability calculation and parameters from the image analysis. The results of the simulation show connectivity in the x-, y-, and z-directions for both the FIB-SEM and Nano-CT images, with very low connectivity in the x-direction but higher connectivity in the y- and z-directions.

Automated summary

The study focuses on characterizing the pore and fracture microstructures in shale using Nano-CT and FIB-SEM techniques, revealing differences in imaging nanopore structure and shale petrophysical properties measurements between the two methods.