Effect of TM (TM=Fe, Mn, Cr) alloying on the high temperature properties and strengthening mechanism of Cf/Al composites

Outstanding strengthening behavior and dynamic mechanical properties of in-situ Al–Al3Ni composites by Cu addition

(2020) Jeong Tae Kim et al.   COMPOSITES PART B-ENGINEERING

Direct growth of thermally reduced graphene oxide on carbon fiber for enhanced mechanical strength

(2020) Beom-Gon Cho et al.   COMPOSITES PART B-ENGINEERING

Introducing graphene (reduced graphene oxide) into Al matrix composites for enhanced high-temperature strength

(2020) Y.N. Zan et al.   COMPOSITES PART B-ENGINEERING

Strengthening and toughening mechanisms of Mg matrix composites reinforced with specific spatial arrangement of in-situ TiB2 nanoparticles

(2020) Peng Xiao et al.   COMPOSITES PART B-ENGINEERING

On the role of carbon nanotubes addition in carbon fiber-reinforced magnesium matrix composites

(2020) Jiming Zhou et al.   Journal of Materials Science

Achieving simultaneously improved tensile strength and ductility of a nano-TiB2/AlSi10Mg composite produced by cold spray additive manufacturing

(2020) Xinliang Xie et al.   COMPOSITES PART B-ENGINEERING

Flexural damage behavior of CF/PA6 plain woven laminates with different layers

(2019) Defang Zhao et al.   COMPOSITES PART B-ENGINEERING

Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance

(2019) Dongdong Gu et al.   COMPOSITES PART B-ENGINEERING

A great improvement of tensile properties of Cf/AZ91D composite through grafting CNTs onto the surface of the carbon fibers

(2019) Jiming Zhou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Deformation-driven metallurgy of graphene nanoplatelets reinforced aluminum composite for the balance between strength and ductility

(2019) Yuming Xie et al.   COMPOSITES PART B-ENGINEERING

A heat treatable TiB 2 /Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties

(2018) P. Wang et al.   COMPOSITES PART B-ENGINEERING

Influence of SiO2 nanoparticles on the microstructure and mechanical properties of Al matrix nanocomposites fabricated by spark plasma sintering

(2018) Pasquale Cavaliere et al.   COMPOSITES PART B-ENGINEERING

Structural and thermal characterization of multiwall carbon nanotubes (MWCNTs) / aluminum (Al) nanocomposites

(2018) S. Saadallah et al.   COMPOSITES PART B-ENGINEERING

Effect of SiC nanowires addition on the interfacial microstructure and mechanical properties of the Cf-SiCNWs/AZ91D composite

(2018) Ting Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of polyurethane dispersion as surface treatment on mechanical, thermal and dynamic mechanical properties of laminated woven carbon-fiber-reinforced polyamide 6 composites

(2018) Defang Zhao et al.   COMPOSITES PART B-ENGINEERING

Interfacial reaction induced efficient load transfer in few-layer graphene reinforced Al matrix composites for high-performance conductor

(2018) Weiwei Zhou et al.   COMPOSITES PART B-ENGINEERING

Mechanical and microstructure properties of deformed Al–Al2O3 nanocomposite at elevated temperature

(2017) H.R. Ezatpour et al.   JOURNAL OF MATERIALS RESEARCH

Thermal activation of dislocations in large scale obstacle bypass

(2017) Cameron Sobie et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Elevated temperature mechanical properties and fracture behaviors of the bond zone of aluminum matrix composites (Al-12Si/ABOw) with Al-12Si alloys

(2017) Xiaohang Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical and thermal properties of nanocarbon-reinforced aluminum matrix composites at elevated temperatures

(2016) S.E. Shin et al.   COMPOSITES PART B-ENGINEERING

Rapid, energy-efficient synthesis of the layered carbide, Al4C3

(2015) Jennifer L. Kennedy et al.   GREEN CHEMISTRY

Effect of fiber orientation on mechanical properties of 2D-C f /Al composites by liquid–solid extrusion following Vacuum infiltration technique

(2015) L.H. Qi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of graphite and granite dust particulates as micro-fillers on tribological performance of Al 6061-T6 hybrid composites

(2015) Anand Pai et al.   TRIBOLOGY INTERNATIONAL

Mechanical Property of M40Jf/5A06Al Composite at Elevated Temperatures

(2015) Da-Guang Li et al.   Acta Metallurgica Sinica-English Letters

Constitutive relationships of hot stamping boron steel B1500HS based on the modified Arrhenius and Johnson–Cook model

(2013) Huiping Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Laser and resistance joining of aluminum–graphite composite

(2012) M. Velamati et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effect of Mg Content on the Thermodynamics of Interface Reaction in Cf/Al Composite

(2012) Chenchong Wang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Precipitation of partially coherent α-Al(Mn,Fe)Si dispersoids and their strengthening effect in AA 3003 alloy

(2011) Y.J. Li et al.   ACTA MATERIALIA

Supportive strengthening role of Cr-rich phase on Al–Si multicomponent piston alloy at elevated temperature

(2011) Yunguo Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Optimizing microstructures of hypereutectic Al–Si alloys with high Fe content via spray forming technique

(2010) L.G. Hou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Comparative study on the interface and mechanical properties of T700/Al and M40/Al composites

(2010) Yunhe Zhang et al.   RARE METALS

The Thermal Stability and Elevated Temperature Mechanical Properties of Spray-Deposited SiCp/Al–11.7Fe–1.3V–1.7Si Composite

(2009) L. Hao et al.   ADVANCED COMPOSITE MATERIALS

Microstructure and mechanical properties of graphite fiber-reinforced high-purity aluminum matrix composite

(2009) X. Wang et al.   JOURNAL OF MATERIALS SCIENCE

Study on graphite fiber and Ti particle reinforced Al composite

(2009) G. H. Wu et al.   JOURNAL OF MATERIALS SCIENCE

Equicohesive temperature of the interface and matrix and its effect on the tensile plasticity of Al18B4O33 whiskers reinforced aluminum composite at elevated temperatures

(2009) W.D. Fei et al.   MATERIALS CHEMISTRY AND PHYSICS

Effect of (Mn+Cr) addition on the microstructure and thermal stability of spray-formed hypereutectic Al–Si alloys

(2009) L.G. Hou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Interface characteristics and mechanical properties of short carbon fibers/Al composites with different coatings

(2008) Yiping Tang et al.   APPLIED SURFACE SCIENCE

Effect of Mg content on the mechanical properties and microstructure of Grf/Al composite

(2008) Xu Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Interface structure in carbon and graphite fiber reinforced 2014 aluminum alloy processed with active fiber cooling

(2007) H.G. Seong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effects of volume percent and aspect ratio of carbon fiber on fracture toughness of reinforced aluminum matrix composites

(2007) H. Naji et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING