3D face-centered-cubic cement-based hybrid composites reinforced by tension-resistant polymeric truss network

Cementitious cellular composites with auxetic behavior

(2020) Yading Xu et al.   CEMENT & CONCRETE COMPOSITES

Cellular concrete review: New trends for application in construction

(2019) Lina Chica et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing

(2019) Guowei Ma et al.   CONSTRUCTION AND BUILDING MATERIALS

A systematical review of 3D printable cementitious materials

(2019) Bing Lu et al.   CONSTRUCTION AND BUILDING MATERIALS

Preparation and optimization of ultra-light and thermal insulative aerogel foam concrete

(2019) Pengwei Li et al.   CONSTRUCTION AND BUILDING MATERIALS

Visual & quantitative identification of cracking in mortar subjected to loads using X-ray computed tomography method

(2019) Shuxian Hong et al.   CEMENT & CONCRETE COMPOSITES

Underwater 3D printing of cement-based mortar

(2019) Brahim Mazhoud et al.   CONSTRUCTION AND BUILDING MATERIALS

Octet-truss cellular materials for improved mechanical properties and specific energy absorption

(2019) Jian Song et al.   MATERIALS & DESIGN

Development of strain hardening cementitious composite (SHCC) reinforced with 3D printed polymeric reinforcement: Mechanical properties

(2019) Yading Xu et al.   COMPOSITES PART B-ENGINEERING

Enhancing the strength of pre-made foams for foam concrete applications

(2018) Ailar Hajimohammadi et al.   CEMENT & CONCRETE COMPOSITES

3D printing using concrete extrusion: A roadmap for research

(2018) R.A. Buswell et al.   CEMENT AND CONCRETE RESEARCH

Rethinking reinforcement for digital fabrication with concrete

(2018) Domenico Asprone et al.   CEMENT AND CONCRETE RESEARCH

Rheological requirements for printable concretes

(2018) Nicolas Roussel   CEMENT AND CONCRETE RESEARCH

Metal-coated hybrid meso-lattice composites and their mechanical characterizations

(2018) Jian Song et al.   COMPOSITE STRUCTURES

3D printing of reinforced concrete elements: Technology and design approach

(2018) Domenico Asprone et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing

(2018) Sarah Al-Qutaifi et al.   CONSTRUCTION AND BUILDING MATERIALS

3D-printed steel reinforcement for digital concrete construction – Manufacture, mechanical properties and bond behaviour

(2018) Viktor Mechtcherine et al.   CONSTRUCTION AND BUILDING MATERIALS

Measurement of tensile bond strength of 3D printed geopolymer mortar

(2018) Biranchi Panda et al.   MEASUREMENT

Ultralow Thermal Conductivity and Mechanical Resilience of Architected Nanolattices

(2018) Nicholas G. Dou et al.   NANO LETTERS

Mechanical Enhancement of Core-Shell Microlattices through High-Entropy Alloy Coating

(2018) James Utama Surjadi et al.   Scientific Reports

Additively-manufactured lightweight Metamaterials for energy absorption

(2018) Mehrdad Mohsenizadeh et al.   MATERIALS & DESIGN

Particle-bed 3D printing in concrete construction – Possibilities and challenges

(2018) Dirk Lowke et al.   CEMENT AND CONCRETE RESEARCH

Vision of 3D printing with concrete — Technical, economic and environmental potentials

(2018) Geert De Schutter et al.   CEMENT AND CONCRETE RESEARCH

Performance-based model to predict thermal conductivity of non-autoclaved aerated concrete through linearization approach

(2018) Anuar Ulykbanov et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical behaviour of additively-manufactured polymeric octet-truss lattice structures under quasi-static and dynamic compressive loading

(2018) Chen Ling et al.   MATERIALS & DESIGN

Effect of magnetized water on foam stability and compressive strength of foam concrete

(2018) Saeid Ghorbani et al.   CONSTRUCTION AND BUILDING MATERIALS

In Situ Mechanical Characterization of Structural Bamboo Materials under Flexural Bending

(2017) J. Song et al.   EXPERIMENTAL TECHNIQUES

Fatigue characterization of structural bamboo materials under flexural bending

(2017) Jian Song et al.   INTERNATIONAL JOURNAL OF FATIGUE

Thermal, mechanical, and surface properties of poly(vinyl alcohol) (PVA) polymer modified cementitious composites for sustainable development

(2017) Zeyu Lu et al.   JOURNAL OF APPLIED POLYMER SCIENCE

3D printed stretching-dominated micro-trusses

(2017) Manpreet Kaur et al.   MATERIALS & DESIGN

Effect of activated foaming agent on the foam concrete properties

(2016) Eva Kuzielová et al.   CONSTRUCTION AND BUILDING MATERIALS

Printing soft matter in three dimensions

(2016) Ryan L. Truby et al.   NATURE

Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders

(2016) C. Gosselin et al.   MATERIALS & DESIGN

Feasibility study on utilization of municipal solid waste incineration bottom ash as aerating agent for the production of autoclaved aerated concrete

(2015) Yuanming Song et al.   CEMENT & CONCRETE COMPOSITES

Properties of autoclaved aerated concrete incorporating rice husk ash as partial replacement for fine aggregate

(2015) Kittipong Kunchariyakun et al.   CEMENT & CONCRETE COMPOSITES

Proportioning and characterization of Portland cement-based ultra-lightweight foam concretes

(2015) Zhaoming Huang et al.   CONSTRUCTION AND BUILDING MATERIALS

High-strength cellular ceramic composites with 3D microarchitecture

(2014) J. Bauer et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Strong, lightweight, and recoverable three-dimensional ceramic nanolattices

(2014) L. R. Meza et al.   SCIENCE

Ultralight, ultrastiff mechanical metamaterials

(2014) X. Zheng et al.   SCIENCE

Building components for an outpost on the Lunar soil by means of a novel 3D printing technology

(2013) Giovanni Cesaretti et al.   ACTA ASTRONAUTICA

Hygric, thermal and durability properties of autoclaved aerated concrete

(2013) Miloš Jerman et al.   CONSTRUCTION AND BUILDING MATERIALS

Developments in construction-scale additive manufacturing processes

(2011) S. Lim et al.   AUTOMATION IN CONSTRUCTION

Thermal insulation and strength of autoclaved light concrete

(2011) Ruochong Yang et al.   JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION

Ultralight Metallic Microlattices

(2011) T. A. Schaedler et al.   SCIENCE

Properties of Ti–6Al–4V non-stochastic lattice structures fabricated via electron beam melting

(2008) O. Cansizoglu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING