Comparison of forced convective heat transfer between pillar and real foam structure under high Reynolds number

Pore-scale simulation of forced convection heat transfer under turbulent conditions in open-cell metal foam

(2020) Mingrui Sun et al.   CHEMICAL ENGINEERING JOURNAL

Pore-scale investigation on the heat-storage characteristics of phase change material in graded copper foam

(2020) Chengzhi Hu et al.   APPLIED THERMAL ENGINEERING

Heat and fluid flow analysis of metal foam embedded in a double-layered sinusoidal heat sink under local thermal non-equilibrium condition using nanofluid

(2019) Hossein Arasteh et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Application of nano-refrigerant for boiling heat transfer enhancement employing an experimental study

(2019) M. Sheikholeslami et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Prediction of high-temperature radiative properties of copper, nickel, zirconia, and alumina foams

(2019) Yang Li et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Thermal performance of micro-channel heat sink with metallic porous/solid compound fin design

(2018) Liang Gong et al.   APPLIED THERMAL ENGINEERING

Performance analysis of a volumetric receiver composed of packed shaped particles with spectrally dependent emissivity

(2018) Qibin Zhu et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Homogenized and pore-scale analyses of forced convection through open cell foams

(2018) Dig Vijay et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental and Numerical Simulation to Investigate the Effects of Membrane Fouling on the Heat and Mass Transfer

(2018) Boran Yang et al.   INTERNATIONAL JOURNAL OF THERMOPHYSICS

Pore-scale numerical simulation of fully coupled heat transfer process in porous volumetric solar receiver

(2017) Shen Du et al.   ENERGY

Design of multifunctional lattice-frame materials for compact heat exchangers

(2017) Karen N. Son et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experiment on the convective heat transfer from airflow to skeleton in open-cell porous foams

(2017) Xin-lin Xia et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical investigation of pressure drop and heat transfer through open cell foams with 3D Laguerre-Voronoi model

(2017) Zhengwei Nie et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental investigation on the thermal performance of a heat sink filled with porous metal fiber sintered felt/paraffin composite phase change material

(2016) Hongfei Wang et al.   APPLIED ENERGY

Enhancement of heat transfer and heat exchanger effectiveness in a double pipe heat exchanger filled with porous media: Numerical simulation and sensitivity analysis of turbulent fluid flow

(2016) Kamel Milani Shirvan et al.   APPLIED THERMAL ENGINEERING

Development of a new pressure drop correlation for open-cell foams based completely on theoretical grounds: Taking into account strut shape and geometric tortuosity

(2016) Amer Inayat et al.   CHEMICAL ENGINEERING JOURNAL

Closure of a macroscopic turbulence and non-equilibrium turbulent heat and mass transfer model for a porous media comprised of randomly packed spheres

(2016) Furqan Ahmad Khan et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Electronic cooling using water flow in aluminum metal foam heat sink: Experimental and numerical approach

(2016) A.M. Bayomy et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

CFD SIMULATION OF FORCED CONVECTIVE HEAT TRANSFER BY TETRAKAIDECAHEDRON MODEL IN METAL FOAMS

(2016) Mohammad Zafari et al.   JOURNAL OF POROUS MEDIA

Lord Kelvin and Weaire–Phelan Foam Models: Heat Transfer and Pressure Drop

(2015) Salvatore Cunsolo et al.   JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME

On flow structure, heat transfer and pressure drop in varying aspect ratio two-pass rectangular channel with ribs at 45°

(2013) Waseem Siddique et al.   HEAT AND MASS TRANSFER

Heat transfer coefficients for solid ceramic sponges – Experimental results and correlation

(2013) B. Dietrich   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical Study of Convective Heat Transfer Enhancement in a Pipe Rotating Around a Parallel Axis

(2013) Aurélie Fasquelle et al.   JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME

Pressure drop correlation for ceramic and metal sponges

(2012) Benjamin Dietrich   CHEMICAL ENGINEERING SCIENCE

Review on thermal transport in high porosity cellular metal foams with open cells

(2012) C.Y. Zhao   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Periodic open-cell foams: Pressure drop measurements and modeling of an ideal tetrakaidecahedra packing

(2011) Amer Inayat et al.   CHEMICAL ENGINEERING SCIENCE

Flow structure, heat transfer and pressure drop in varying aspect ratio two-pass rectangular smooth channels

(2011) Waseem Siddique et al.   HEAT AND MASS TRANSFER

Numerical simulation of convective heat transfer between air flow and ceramic foams to optimise volumetric solar air receiver performances

(2010) Zhiyong Wu et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental and numerical studies of the pressure drop in ceramic foams for volumetric solar receiver applications

(2009) Zhiyong Wu et al.   APPLIED ENERGY

Pressure drop measurements of ceramic sponges—Determining the hydraulic diameter

(2009) Benjamin Dietrich et al.   CHEMICAL ENGINEERING SCIENCE

Computational study of forced convective heat transfer in structured packed beds with spherical or ellipsoidal particles

(2009) Jian Yang et al.   CHEMICAL ENGINEERING SCIENCE

The effect of heat transfer on the pressure drop through a heat exchanger for aero engine applications

(2008) C. Albanakis et al.   APPLIED THERMAL ENGINEERING

Numerical investigation on the flow characteristics and permeability of three-dimensional reticulated foam materials

(2007) Weigang Xu et al.   CHEMICAL ENGINEERING JOURNAL