On the role of chemical heterogeneity in phase transformations and mechanical behavior of flash annealed quenching & partitioning steels

Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels

(2020) Ran Ding et al.   Science Advances

Kinetic transitions and Mn partitioning during austenite growth from a mixture of partitioned cementite and ferrite: Role of heating rate

(2020) Geng Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

A Model and Experimental Validation to Predict Heating Rates for Overlap Between Ferrite Recrystallization and Austenite Transformation in Dual Phase Steel Manufacture

(2019) Bharath Bandi et al.   JOM

Stabilizing austenite via a core-shell structure in the medium Mn steels

(2019) Xinhao Wan et al.   SCRIPTA MATERIALIA

Fine microstructure formation in steel under ultrafast heating

(2019) Mitsuharu Yonemura et al.   Scientific Reports

Quenching and flash-partitioning enables austenite stabilization during press-hardening processing

(2019) H.L. Cai et al.   SCRIPTA MATERIALIA

Effect of pre-existed austenite on austenite reversion and mechanical behavior of an Fe-0.2C-8Mn-2Al medium Mn steel

(2018) Ran Ding et al.   ACTA MATERIALIA

Advanced high strength steel (AHSS) development through chemical patterning of austenite

(2018) W.W. Sun et al.   SCRIPTA MATERIALIA

Influence of Heating Rate on Ferrite Recrystallization and Austenite Formation in Cold-Rolled Microalloyed Dual-Phase Steels

(2017) C. Philippot et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

High dislocation density–induced large ductility in deformed and partitioned steels

(2017) B. B. He et al.   SCIENCE

Controlling the work hardening of martensite to increase the strength/ductility balance in quenched and partitioned steels

(2017) K.O. Findley et al.   MATERIALS & DESIGN

Vessel microstructure design: A new approach for site-specific core-shell micromechanical tailoring of TRIP-assisted ultra-high strength steels

(2016) M. Belde et al.   ACTA MATERIALIA

Dilatometric study on the recrystallization and austenization behavior of cold-rolled steel with different heating rates

(2016) Geng Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Tensile properties analysis of AA1100 aluminium and SS400 steel using different JIS tensile standard specimen

(2016) Rianti Dewi Sulamet-Ariobimo et al.   Journal of Applied Research and Technology

Fast-heating for intercritical annealing of cold-rolled quenching and partitioning steel

(2016) Geng Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Alloying effects on microstructure formation of dual phase steels

(2015) L. Schemmann et al.   ACTA MATERIALIA

Multiphase microstructures via confined precipitation and dissolution of vessel phases: Example of austenite in martensitic steel

(2015) M. Belde et al.   ACTA MATERIALIA

The influence of ultra-fast annealing prior to quenching and partitioning on the microstructure and mechanical properties

(2015) Dorien De Knijf et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical stability of individual austenite grains in TRIP steel studied by synchrotron X-ray diffraction during tensile loading

(2014) R. Blondé et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of fresh martensite on the stability of retained austenite in quenching and partitioning steel

(2014) Dorien De Knijf et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The Effect of the Initial Microstructure on Recrystallization and Austenite Formation in a DP600 Steel

(2013) M. Kulakov et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Unambiguous carbon partitioning from martensite to austenite in Fe–C–Ni alloys during quenching and partitioning

(2013) M. Gouné et al.   SCRIPTA MATERIALIA

Ultra-Rapid Intercritical Annealing to Improve Deep Drawability of Low-Carbon, Al-Killed Steels

(2012) V. Massardier et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

The effect of morphology on the stability of retained austenite in a quenched and partitioned steel

(2012) X.C. Xiong et al.   SCRIPTA MATERIALIA

Deformation-induced austenite grain rotation and transformation in TRIP-assisted steel

(2011) G.K. Tirumalasetty et al.   ACTA MATERIALIA

In situ synchrotron study on the interplay between martensite formation, texture evolution and load partitioning in low-alloyed TRIP steels

(2011) E. Jimenez-Melero et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Identification of the parameters controlling the grain refinement of ultra-rapidly annealed low carbon Al-killed steels

(2010) V. Massardier et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD

(2010) Marion Calcagnotto et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Austenite Formation in Plain Low-Carbon Steels

(2010) Hamid Azizi-Alizamini et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Microstructural Evolution of a Low-Carbon Steel during Application of Quenching and Partitioning Heat Treatments after Partial Austenitization

(2008) M.J. Santofimia et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effect of Retained Austenite Stabilized via Quench and Partitioning on the Strain Hardening of Martensitic Steels

(2008) E. De Moor et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Carbon partitioning to austenite from martensite or bainite during the quench and partition (Q&P) process: A critical assessment

(2007) A.J. Clarke et al.   ACTA MATERIALIA