4.8 Article

GC-like Graphene-Coated Quartz Crystal Microbalance Sensor with Microcolumns

Journal

ACS APPLIED MATERIALS & INTERFACES
Volume 13, Issue 3, Pages 4703-4710

Publisher

AMER CHEMICAL SOC
DOI: 10.1021/acsami.0c19010

Keywords

quartz crystal microbalance; gas chromatography; chemical sensor; single-gas sensor; microcolumn

Funding

  1. Multi-Ministry Collaborative R&D Program (Development of Techniques for Identification and Analysis of Gas Molecules to Protect Against Toxic Substances) through the National Research Foundation of Korea (NRF) - KNPA
  2. MSIT
  3. MOTIE
  4. ME
  5. NFA [NRF-2017M3D9A1073502]
  6. Bio & Medical Technology Development Program of the National Research Foundation (NRF) - Ministry of Science, ICT & Future Planning [NRF-2020M3A9E4039224]
  7. Korea Research Institute of Chemical Technology (KRICT)

Ask authors/readers for more resources

A highly facile method utilizing microcolumns integrated on a QCM gas-responsive system with enhanced chemical selectivity was reported for sensing and identifying volatile organic compound single gases. The addition of microcolumns on the QCM electrode increased the ability to accurately analyze frequency shifts upon sensing various single gas molecules. The system exhibited high detection response values above 50 ng/cm(2) for gases, with the microcolumn-equipped sensor showing improved gas identification ability based on distinct diverging behavior of time constants upon detection of different gases.
Many research groups have been interested in the quartz crystal microbalance (QCM)-based gas sensors due to their superb sensitivity originated from direct mass sensing at the ng level. Despite such high sensitivities observed from QCM sensors, their ability to identify gas compounds still needs to be enhanced. Herein, we report a highly facile method that utilizes microcolumns integrated on a QCM gas-responsive system with enhanced chemical selectivity for sensing and ability to identify volatile organic compound single gases. Graphene oxide (GO) flakes are coated on the QCM electrode to substantially increase the adsorption of gas molecules, and periodic polydimethylsiloxane microcolumns with micrometer-scale width and height were installed on the GO-coated QCM electrode. The observed frequency shifts upon sensing of various single gas molecules (such as ethanol, acetone, hexane, etc.) can be analyzed accurately using a simple exponential model. The QCM sensor system with and without the microcolumn both exhibited high detection response values above 50 ng/cm(2) for sensing of the gases. Notably, the QCM sensor equipped with the microcolumn features gas identification ability, which is observed as distinct diverging behavior of time constants upon detection of different gases caused by the difference in diffusional transfer of molecules through the microcolumns. For example, the difference in the calculated time constant between ethanol and acetone increased from 22.6 to 92.1 s after installation of the microcolumn. This approach provides an easy and efficient method for identification of single gases, and it may be applied in various advanced sensor systems to enhance their gas selectivity.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.8
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available