Additive manufacturing of a shift block via laser powder bed fusion: the simultaneous utilisation of optimised topology and a lattice structure
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Additive manufacturing of a shift block via laser powder bed fusion: the simultaneous utilisation of optimised topology and a lattice structure
Authors
Keywords
-
Journal
Virtual and Physical Prototyping
Volume 15, Issue 4, Pages 460-480
Publisher
Informa UK Limited
Online
2020-09-15
DOI
10.1080/17452759.2020.1818917
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Multiaxial fatigue of LB-PBF additive manufactured 17–4 PH stainless steel including the effects of surface roughness and HIP treatment and comparisons with the wrought alloy
- (2020) Reza Molaei et al. INTERNATIONAL JOURNAL OF FATIGUE
- Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments
- (2020) S. L. Sing et al. Virtual and Physical Prototyping
- Microstructural features of novel corrosion-resistant maraging steel manufactured by laser powder bed fusion
- (2020) Robert Palad et al. MATERIALS LETTERS
- Solution annealing and precipitation hardening effect on the mechanical properties of 630 stainless steel fabricated via laser melting deposition
- (2020) Wook Jin Oh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural evolution and mechanical properties of a newly designed steel fabricated by laser powder bed fusion
- (2020) Yuan Tian et al. Additive Manufacturing
- Fine Microstructured In–Sn–Bi Solder for Adhesion on a Flexible PET Substrate: Its Effect on Superplasticity and Toughness
- (2019) Sang Hoon Kim et al. ACS Applied Materials & Interfaces
- Beneficial effect of reversed austenite on the intergranular corrosion resistance of martensitic stainless steel
- (2019) Cheng Man et al. CORROSION SCIENCE
- Dynamics of pore formation during laser powder bed fusion additive manufacturing
- (2019) Aiden A. Martin et al. Nature Communications
- 3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
- (2019) Nesma T. Aboulkhair et al. PROGRESS IN MATERIALS SCIENCE
- Introduction to the design rules for Metal Big Area Additive Manufacturing
- (2019) Clayton Greer et al. Additive Manufacturing
- Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice
- (2019) J.P. Oliveira et al. PROGRESS IN MATERIALS SCIENCE
- Multi-lattice inner structures for high-strength and light-weight in metal selective laser melting process
- (2019) Dongseok Kang et al. MATERIALS & DESIGN
- The influence of pulsed laser powder bed fusion process parameters on Inconel 718 material properties
- (2019) Konstantinos Georgilas et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of solution heat treatment on microstructure and mechanical properties of laser powder bed fusion produced cobalt-28chromium-6molybdenum
- (2019) Swee Leong Sing et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tribological behavior of 17–4 PH stainless steel fabricated by traditional manufacturing and laser-based additive manufacturing methods
- (2019) Sanjeev KC et al. WEAR
- Effects of heat treatment on microstructure, mechanical and corrosion properties of 15-5 PH stainless steel parts built by selective laser melting process
- (2019) Sagar Sarkar et al. Journal of Manufacturing Processes
- Microstructure evolution and mechanical property response via 3D printing parameter development of Al–Sc alloy
- (2019) C. N. Kuo et al. Virtual and Physical Prototyping
- Nano-precipitates evolution and their effects on mechanical properties of 17-4 precipitation-hardening stainless steel
- (2018) Zemin Wang et al. ACTA MATERIALIA
- Influence of a nanotwinned, nanocrystalline microstructure on aging of a Ni-25Mo-8Cr superalloy
- (2018) Megan G. Emigh et al. ACTA MATERIALIA
- Investigating the effect of Cu-rich phase on the corrosion behavior of Super 304H austenitic stainless steel by TEM
- (2018) X.Y. San et al. CORROSION SCIENCE
- Ternary Bi 2 Te 3 In 2 Te 3 Ga 2 Te 3 (n-type) thermoelectric film on a flexible PET substrate for use in wearables
- (2018) Sang Hoon Kim et al. ENERGY
- Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review
- (2018) Xianglong Yu et al. PROGRESS IN MATERIALS SCIENCE
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- A Modular Solder System with Hierarchical Morphology and Backward Compatibility
- (2018) Han Bit Lee et al. Small
- In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
- (2018) Chu Lun Alex Leung et al. Nature Communications
- Additive manufacturing of 3D nano-architected metals
- (2018) Andrey Vyatskikh et al. Nature Communications
- A phenomenological study of a Sn–Ag–Al composite solder reinforced with Mg–MWCNT: Improved electrical conductivity and thermo-physical performance
- (2018) Sang Hoon Kim et al. MATERIALS & DESIGN
- Peritectic titanium alloys for 3D printing
- (2018) Pere Barriobero-Vila et al. Nature Communications
- Probing the frequency-dependent elastic moduli of lattice materials
- (2018) T. Mukhopadhyay et al. ACTA MATERIALIA
- Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Processing-structure-property relationships of continuous carbon fiber polymer-matrix composites
- (2017) D.D.L. Chung MATERIALS SCIENCE & ENGINEERING R-REPORTS
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Additively manufactured hierarchical stainless steels with high strength and ductility
- (2017) Y. Morris Wang et al. NATURE MATERIALS
- Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium
- (2017) Clodualdo Aranas et al. SCRIPTA MATERIALIA
- Role of anisotropic properties on topology optimization of additive manufactured load bearing structures
- (2017) Pu Zhang et al. SCRIPTA MATERIALIA
- 3D printing: May the strength be with you
- (2017) Giulia Pacchioni Nature Reviews Materials
- Thermo-mechanical improvement of Inconel 718 using ex situ boron nitride-reinforced composites processed by laser powder bed fusion
- (2017) Sang Hoon Kim et al. Scientific Reports
- Formation of Widmanstätten ferrite at very high temperatures in the austenite phase field
- (2016) Rupanjit Grewal et al. ACTA MATERIALIA
- Oxidation resistant effects of Ag2S in Sn–Ag–Al solder: A mechanism for higher electrical conductivity and less whisker growth
- (2016) Sang Hoon Kim et al. CORROSION SCIENCE
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Composite 3D-printed metastructures for low-frequency and broadband vibration absorption
- (2016) Kathryn H. Matlack et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Dynamic transformation of deformed austenite at temperatures above the Ae 3
- (2016) Chiradeep Ghosh et al. PROGRESS IN MATERIALS SCIENCE
- Metallic microlattice materials: A current state of the art on manufacturing, mechanical properties and applications
- (2016) M.G. Rashed et al. MATERIALS & DESIGN
- Fabrication of pre-alloyed Al–Li powders with high Li content via thermal dehydrogenation of LiH and rapid solidification process
- (2016) Sang Hoon Kim et al. MATERIALS & DESIGN
- Effect of Mn and Si on the dynamic transformation of austenite above the Ae 3 temperature
- (2015) Clodualdo Aranas et al. ACTA MATERIALIA
- Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation
- (2015) Qiancheng Zhang et al. PROGRESS IN MATERIALS SCIENCE
- Kinetics of anomalous multi-step formation of lath martensite in steel
- (2014) Matteo Villa et al. ACTA MATERIALIA
- Phase transformation of Cu precipitates from bcc to fcc in Fe–3Si–2Cu alloy
- (2012) Y.-U. Heo et al. ACTA MATERIALIA
- Microstructure and mechanical properties of laser forming repaired 17-4PH stainless steel
- (2012) Xin Lin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Stabilizing internal stress as the thermodynamic factor of martensite aging effects
- (2011) Anna Kosogor et al. ACTA MATERIALIA
- Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
- (2011) Julia R. Greer et al. PROGRESS IN MATERIALS SCIENCE
- Manufacturing and processing of NiTi implants: A review
- (2011) Mohammad H. Elahinia et al. PROGRESS IN MATERIALS SCIENCE
- Steels for bearings
- (2011) H.K.D.H. Bhadeshia PROGRESS IN MATERIALS SCIENCE
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started