Polymer Selection for Hot-Melt Extrusion Coupled to Fused Deposition Modelling in Pharmaceutics
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Polymer Selection for Hot-Melt Extrusion Coupled to Fused Deposition Modelling in Pharmaceutics
Authors
Keywords
-
Journal
Pharmaceutics
Volume 12, Issue 9, Pages 795
Publisher
MDPI AG
Online
2020-08-24
DOI
10.3390/pharmaceutics12090795
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Systematic screening of pharmaceutical polymers for hot melt extrusion processing: a comprehensive review
- (2020) Rishi Thakkar et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Development of 3D Printed Tablets by Fused Deposition Modeling Using Polyvinyl Alcohol as Polymeric Matrix for Rapid Drug Release
- (2020) Can Wei et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Novel Gastroretentive Floating Pulsatile Drug Delivery System Produced via Hot-Melt Extrusion and Fused Deposition Modeling 3D Printing
- (2020) Nagi Reddy Dumpa et al. Pharmaceutics
- Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials–Process Perspective
- (2020) Mohammad A. Azad et al. Pharmaceutics
- 3D printing by fused deposition modeling of single- and multi-compartment hollow systems for oral delivery – A review
- (2020) Alice Melocchi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Comparison of fused-filament fabrication to direct compression and injection molding in the manufacture of oral tablets
- (2019) Evert Fuenmayor et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Characterization of amorphous solid dispersions: An update
- (2019) Xiangyu Ma et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- The Digital Pharmacies Era: How 3D Printing Technology Using Fused Deposition Modeling Can Become a Reality
- (2019) Maisa Araújo et al. Pharmaceutics
- Edible solid foams as porous substrates for inkjet-printable pharmaceuticals
- (2019) Laura-Diana Iftimi et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- The applicability of pharmaceutical polymeric blends for the fused deposition modelling (FDM) 3D technique: Material considerations–printability–process modulation, with consecutive effects on in vitro release, stability and degradation
- (2019) Kinga Ilyés et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- An update on the contribution of hot-melt extrusion technology to novel drug delivery in the twenty-first century: part II
- (2019) Sandeep Sarabu et al. Expert Opinion on Drug Delivery
- Poly(vinyl alcohol) 3D printed tablets: The effect of polymer particle size on drug loading and process efficiency
- (2019) Marilena Saviano et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed oral theophylline doses with innovative ‘radiator-like’ design: Impact of polyethylene oxide (PEO) molecular weight
- (2019) Abdullah Isreb et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabrication of Zero-Order Sustained-Release Floating Tablets via Fused Depositing Modeling 3D Printer
- (2019) Shin-ichiro Kimura et al. CHEMICAL & PHARMACEUTICAL BULLETIN
- 3D floating tablets: Appropriate 3D design from the perspective of different in vitro dissolution testing methodologies
- (2019) Kinga Ilyés et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Design and 3D printing of multi-compartmental PVA capsules for drug delivery
- (2019) Gordana Matijašić et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Development and evaluation of pharmaceutical 3D printability for hot melt extruded cellulose-based filaments
- (2019) Jiaxiang Zhang et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Effects of Surfactants on Itraconazole-HPMCAS Solid Dispersion Prepared by Hot Melt Extrusion. III: Tableting of Extrudates and Drug Release from Tablets
- (2019) Nayan G. Solanki et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Cold plasma treatment to improve the adhesion of cassava starch films onto PCL and PLA surface
- (2019) Helena M. Heidemann et al. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
- Enhanced rheological behaviors of alginate hydrogels with carrageenan for extrusion-based bioprinting
- (2019) Myoung Hwan Kim et al. Journal of the Mechanical Behavior of Biomedical Materials
- Speed it up, slow it down…An issue of bicalutamide release from 3D printed tablets
- (2019) Witold Jamróz et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Fabrication of floating capsule-in- 3D-printed devices as gastro-retentive delivery systems of amoxicillin
- (2019) Thapakorn Charoenying et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- 3D-Printed Network Structures as Controlled-Release Drug Delivery Systems: Dose Adjustment, API Release Analysis and Prediction
- (2018) Carolin Korte et al. AAPS PHARMSCITECH
- 3D printed drug delivery and testing systems — a passing fad or the future?
- (2018) Seng Han Lim et al. ADVANCED DRUG DELIVERY REVIEWS
- Tablet fragmentation without a disintegrant: A novel design approach for accelerating disintegration and drug release from 3D printed cellulosic tablets
- (2018) Basel Arafat et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- A 3D printed bilayer oral solid dosage form combining metformin for prolonged and glimepiride for immediate drug delivery
- (2018) Christos I. Gioumouxouzis et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- 3D printed tablets with internal scaffold structure using ethyl cellulose to achieve sustained ibuprofen release
- (2018) Yan Yang et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Tailored on demand anti-coagulant dosing: An in vitro and in vivo evaluation of 3D printed purpose-designed oral dosage forms
- (2018) Basel Arafat et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Pharmaceutical 3D printing: Design and qualification of a single step print and fill capsule
- (2018) Derrick M. Smith et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed UV light cured polydimethylsiloxane devices for drug delivery
- (2018) Jenny Holländer et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- PET/CT imaging of 3D printed devices in the gastrointestinal tract of rodents
- (2018) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs
- (2018) Gayathri Kollamaram et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Defined drug release from 3D-printed composite tablets consisting of drug-loaded polyvinylalcohol and a water-soluble or water-insoluble polymer filler
- (2018) Tatsuaki Tagami et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of high drug loaded dosage forms using thermoplastic polyurethanes
- (2018) G. Verstraete et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Channelled tablets: An innovative approach to accelerating drug release from 3D printed tablets
- (2018) Muzna Sadia et al. JOURNAL OF CONTROLLED RELEASE
- Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release, Drug-Polymer Miscibility and Printability
- (2018) Nayan G. Solanki et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- The Application of 3D Printing in the Formulation of Multilayered Fast Dissolving Oral Films
- (2018) Touraj Ehtezazi et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Formulation development and process analysis of drug-loaded filaments manufactured via hot-melt extrusion for 3D-printing of medicines
- (2018) Carolin Korte et al. PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
- 3D Printed “Starmix” Drug Loaded Dosage Forms for Paediatric Applications
- (2018) Nicolaos Scoutaris et al. PHARMACEUTICAL RESEARCH
- Development of a Simple Mechanical Screening Method for Predicting the Feedability of a Pharmaceutical FDM 3D Printing Filament
- (2018) Jehad M. Nasereddin et al. PHARMACEUTICAL RESEARCH
- Immediate Release 3D-Printed Tablets Produced Via Fused Deposition Modeling of a Thermo-Sensitive Drug
- (2018) Wiebke Kempin et al. PHARMACEUTICAL RESEARCH
- The causes and effects of degradation of encapsulant ethylene vinyl acetate copolymer (EVA) in crystalline silicon photovoltaic modules: A review
- (2018) Michele Cândida Carvalho de Oliveira et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Material Considerations for Fused-Filament Fabrication of Solid Dosage Forms
- (2018) Evert Fuenmayor et al. Pharmaceutics
- 3D Printing Methods for Pharmaceutical Manufacturing: Opportunity and Challenges
- (2018) Musarrat Husain Warsi et al. CURRENT PHARMACEUTICAL DESIGN
- Cellulose based polymers in development of amorphous solid dispersions
- (2018) Rahul B Chavan et al. Asian Journal of Pharmaceutical Sciences
- Advanced Pharmaceutical Applications of Hot-Melt Extrusion Coupled with Fused Deposition Modelling (FDM) 3D Printing for Personalised Drug Delivery
- (2018) Deck Tan et al. Pharmaceutics
- Application of 3D printing technology and quality by design approach for development of age-appropriate pediatric formulation of baclofen
- (2018) Siddhant Palekar et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- ‘Temporary Plasticiser’: A novel solution to fabricate 3D printed patient-centred cardiovascular ‘Polypill’ architectures
- (2018) Beatriz C. Pereira et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Assessment of different polymers and drug loads for fused deposition modeling of drug loaded implants
- (2017) Wiebke Kempin et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- 3D printing of oral drugs: a new reality or hype?
- (2017) Wen-Kai Hsiao et al. Expert Opinion on Drug Delivery
- Patient acceptability of 3D printed medicines
- (2017) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Selective laser sintering (SLS) 3D printing of medicines
- (2017) Fabrizio Fina et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing
- (2017) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed tablets loaded with polymeric nanocapsules: An innovative approach to produce customized drug delivery systems
- (2017) R.C.R. Beck et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets
- (2017) Jiaxiang Zhang et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Preparation and investigation of controlled-release glipizide novel oral device with three-dimensional printing
- (2017) Qijun Li et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed orodispersible films with Aripiprazole
- (2017) Witold Jamróz et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed multi-compartment capsular devices for two-pulse oral drug delivery
- (2017) A. Maroni et al. JOURNAL OF CONTROLLED RELEASE
- Anti-tuberculosis drug combination for controlled oral delivery using 3D printed compartmental dosage forms: From drug product design to in vivo testing
- (2017) Natalja Genina et al. JOURNAL OF CONTROLLED RELEASE
- Estimation of filament temperature and adhesion development in fused deposition techniques
- (2017) S.F. Costa et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Uses of polypills for cardiovascular disease and evidence to date
- (2017) Mark D Huffman et al. LANCET
- Putting polypills into practice: challenges and lessons learned
- (2017) Ruth Webster et al. LANCET
- Fused Deposition Modeling (FDM) 3D Printed Tablets for Intragastric Floating Delivery of Domperidone
- (2017) Xuyu Chai et al. Scientific Reports
- Review: Application of Fused Deposition Modelling (FDM) Method of 3D Printing in Drug Delivery
- (2016) Jingjunjiao Long et al. CURRENT PHARMACEUTICAL DESIGN
- Modifying release characteristics from 3D printed drug-eluting products
- (2016) Johan Boetker et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices
- (2016) Natalja Genina et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- An investigation into the use of polymer blends to improve the printability of and regulate drug release from pharmaceutical solid dispersions prepared via fused deposition modeling (FDM) 3D printing
- (2016) Muqdad Alhijjaj et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Dual release and molecular mechanism of bilayered aceclofenac tablet using polymer mixture
- (2016) Hien Van Nguyen et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based caplets
- (2016) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling
- (2016) Alice Melocchi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Adaptation of pharmaceutical excipients to FDM 3D printing for the fabrication of patient-tailored immediate release tablets
- (2016) Muzna Sadia et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
- (2016) Jonathan Goole et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems
- (2016) Alvaro Goyanes et al. JOURNAL OF CONTROLLED RELEASE
- Three-Dimensional Printed PCL-Based Implantable Prototypes of Medical Devices for Controlled Drug Delivery
- (2016) Jenny Holländer et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- A Lower Temperature FDM 3D Printing for the Manufacture of Patient-Specific Immediate Release Tablets
- (2016) Tochukwu C. Okwuosa et al. PHARMACEUTICAL RESEARCH
- Fabricating a Shell-Core Delayed Release Tablet Using Dual FDM 3D Printing for Patient-Centred Therapy
- (2016) Tochukwu C. Okwuosa et al. PHARMACEUTICAL RESEARCH
- Printed Drug-Delivery Systems for Improved Patient Treatment
- (2016) Niklas Sandler et al. TRENDS IN PHARMACOLOGICAL SCIENCES
- A Solution-Doped Polymer Semiconductor:Insulator Blend for Thermoelectrics
- (2016) David Kiefer et al. Advanced Science
- Investigation of Thermal and Viscoelastic Properties of Polymers Relevant to Hot Melt Extrusion, IV: Affinisol™ HPMC HME Polymers
- (2015) Simerdeep Singh Gupta et al. AAPS PHARMSCITECH
- Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation
- (2015) Hemlata Patil et al. AAPS PHARMSCITECH
- 3D Printing technologies for drug delivery: a review
- (2015) Leena Kumari Prasad et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
- (2015) Justyna Skowyra et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Development and evaluation of gastroretentive raft forming systems incorporating curcumin-Eudragit® EPO solid dispersions for gastric ulcer treatment
- (2015) Nattha Kerdsakundee et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- 3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
- (2015) Alvaro Goyanes et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- A flexible-dose dispenser for immediate and extended release 3D printed tablets
- (2015) Katarzyna Pietrzak et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Hyperspectral imaging in quality control of inkjet printed personalised dosage forms
- (2015) Hossein Vakili et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Rheology as a tool for evaluation of melt processability of innovative dosage forms
- (2015) Johanna Aho et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Personalised dosing: Printing a dose of one’s own medicine
- (2015) Mustafa Alomari et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
- (2015) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Effect of geometry on drug release from 3D printed tablets
- (2015) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
- (2015) Shaban A. Khaled et al. JOURNAL OF CONTROLLED RELEASE
- 3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs
- (2015) Alice Melocchi et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- 3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
- (2015) Alvaro Goyanes et al. MOLECULAR PHARMACEUTICS
- Fused-filament 3D printing (3DP) for fabrication of tablets
- (2014) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Innovations in 3D printing: a 3D overview from optics to organs
- (2013) Carl Schubert et al. BRITISH JOURNAL OF OPHTHALMOLOGY
- Current trends and future perspectives of solid dispersions containing poorly water-soluble drugs
- (2013) Chau Le-Ngoc Vo et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Desktop 3D printing of controlled release pharmaceutical bilayer tablets
- (2013) Shaban A. Khaled et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Three-dimensional drug printing: A structured review
- (2013) Iulia D. Ursan et al. JOURNAL OF THE AMERICAN PHARMACISTS ASSOCIATION
- Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC)
- (2012) J. Siepmann et al. ADVANCED DRUG DELIVERY REVIEWS
- Gastroresistant capsular device prepared by injection molding
- (2012) Lucia Zema et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Nanosuspensions as advanced printing ink for accurate dosing of poorly soluble drugs in personalized medicines
- (2011) Jana Pardeike et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Comparison of Electrospun and Extruded Soluplus®-Based Solid Dosage Forms of Improved Dissolution
- (2011) Zsombor K. Nagy et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Biodegradable nanoparticles are excellent vehicle for site directed in-vivo delivery of drugs and vaccines
- (2011) Anil Mahapatro et al. JOURNAL OF NANOBIOTECHNOLOGY
- Controlled release formulation of ranitidine-containing montmorillonite and Eudragit® E-100
- (2010) Ghanshyam V. Joshi et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Raman spectroscopy for the in-line polymer–drug quantification and solid state characterization during a pharmaceutical hot-melt extrusion process
- (2010) L. Saerens et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Hydroxypropyl Methylcellulose Acetate Succinate: Potential Drug–Excipient Incompatibility
- (2008) Zedong Dong et al. AAPS PHARMSCITECH
- Effect of processing conditions on the bonding quality of FDM polymer filaments
- (2008) Q. Sun et al. RAPID PROTOTYPING JOURNAL
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationPublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More