Comparison of Substrate Preheating on Mechanical and Microstructural Properties of Hybrid Specimens Fabricated by Laser Metal Deposition 316 L with Different Wrought Steel Substrate

Scaling Up metal additive manufacturing process to fabricate molds for composite manufacturing

(2020) Ahmed Arabi Hassen et al.   Additive Manufacturing

Laser Metal Deposition of an AlCoCrFeNiTi0.5 High-Entropy Alloy Coating on a Ti6Al4V Substrate: Microstructure and Oxidation Behavior

(2020) Wenyuan Cui et al.   Crystals

Hybrid directed energy deposition for fabricating metal structures with embedded sensors

(2020) Michael Juhasz et al.   Additive Manufacturing

Experimental study on the fabrication profile and mechanical properties by substrate-inclined angle using laser melting deposition (LMD) integrating with the substrate of stainless steel

(2019) Yu He et al.   OPTICS AND LASER TECHNOLOGY

Microstructures and tensile properties of laser cladded AerMet100 steel coating on 300 M steel

(2018) Jian Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effects of preheating and carbon dilution on material characteristics of laser-cladded hypereutectoid rail steels

(2018) Quan Lai et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Case Study to Illustrate the Potential of Conformal Cooling Channels for Hot Stamping Dies Manufactured Using Hybrid Process of Laser Metal Deposition (LMD) and Milling

(2018) Magdalena Cortina et al.   Metals

Microstructure and mechanical characteristics of multi-layered materials composed of 316L stainless steel and ferritic steel produced by direct energy deposition

(2018) Dong-Kyu Kim et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of substrate preheating by induction heater on direct energy deposition of AISI M4 powder

(2017) Do-Sik Shim et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing

(2017) M.S. Pham et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing

(2017) Xiaohui Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Real-time monitoring and prediction of martensite formation and hardening depth during laser heat treatment

(2017) Mohammad H. Farshidianfar et al.   SURFACE & COATINGS TECHNOLOGY

Effect of dilution and macrosegregation on corrosion resistance of laser clad AerMet100 steel coating on 300M steel substrate

(2017) Jian Liu et al.   SURFACE & COATINGS TECHNOLOGY

Metallurgical and geometrical characterisation of the 316L stainless steel clad deposited on a mild steel substrate

(2017) R.A. Rahman Rashid et al.   SURFACE & COATINGS TECHNOLOGY

Microstructure evolution and EBSD analysis of a graded steel fabricated by laser additive manufacturing

(2017) Qiang Wang et al.   VACUUM

Microstructure and Microhardness of Laser Metal Deposition Shaping K465/Stellite-6 Laminated Material

(2017) Zhiguo Wang et al.   Metals

Microstructural evolution and bonding characteristic in multi-layer laser cladding of NiCoCr alloy on compacted graphite cast iron

(2016) Hao Liu et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Repair of 304 stainless steel by laser cladding with 316L stainless steel powders followed by laser surface alloying with WC powders

(2016) Lijun Song et al.   Journal of Manufacturing Processes

Evaluation of defect density, microstructure, residual stress, elastic modulus, hardness and strength of laser-deposited AISI 4340 steel

(2015) Guifang Sun et al.   ACTA MATERIALIA

Effect of substrate temperature on the interface bond between support and substrate during selective laser melting of Al–Ni–Y–Co–La metallic glass

(2015) X.P. Li et al.   MATERIALS & DESIGN

Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel

(2015) Aref Yadollahi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical properties of hybrid fabricated Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy by laser additive manufacturing

(2014) Yanyan Zhu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

An experimental–numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser

(2014) Parisa Farahmand et al.   OPTICS AND LASER TECHNOLOGY

Repair of Erosion Defects in Gun Barrels by Direct Laser Deposition

(2012) Steffen Nowotny et al.   JOURNAL OF THERMAL SPRAY TECHNOLOGY

Experimental study of residual stresses in laser clad AISI P20 tool steel on pre-hardened wrought P20 substrate

(2010) J.-Y. Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING