Effect of Four Manufacturing Techniques (Casting, Laser Directed Energy Deposition, Milling and Selective Laser Melting) on Microstructural, Mechanical and Electrochemical Properties of Co-Cr Dental Alloys, Before and After PFM Firing Process

Mechanical Properties of CoCr Dental-Prosthesis Restorations Made by Three Manufacturing Processes. Influence of the Microstructure and Topography

(2020) Roberto Padrós et al.   Metals

The Effect of Cyclic Solution Heat Treatment on the Martensitic Phase Transformation and Grain Refinement of Co-Cr-Mo Dental Alloy

(2020) Shahab Zangeneh et al.   Metals

Corrosion Resistance and Ion Release of Dental Prosthesis of CoCr Obtained by CAD-CAM Milling, Casting and Laser Sintering

(2020) Roberto Padrós et al.   Metals

Microstructural, mechanical, ionic release and tarnish resistance characterization of porcelain fused to metal Co–Cr alloys manufactured via casting and three different CAD/CAM techniques

(2019) Youssef S. Al Jabbari et al.   Journal of Prosthodontic Research

Microstructure and mechanical anisotropy of CoCrW alloy processed by selective laser melting

(2019) Ho Won Lee et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Anisotropic microstructure and mechanical properties of additively manufactured Co–Cr–Mo alloy using selective electron beam melting for orthopedic implants

(2019) D.D. Xiang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A comparison of laser deposition of commercially pure titanium using gas atomized or Ti sponge powders

(2019) J.M. Amado et al.   SURFACE & COATINGS TECHNOLOGY

Rapid prediction of real-time thermal characteristics, solidification parameters and microstructure in laser directed energy deposition (powder-fed additive manufacturing)

(2019) Yuze Huang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Investigation on the microstructure and machinability of ASTM A131 steel manufactured by directed energy deposition

(2019) Yuchao Bai et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Metal matrix composites with ternary intermetallic inclusions fabricated by laser direct energy deposition

(2018) Igor Shishkovsky et al.   COMPOSITE STRUCTURES

Comparative analysis of the microstructures and mechanical properties of Co-Cr dental alloys fabricated by different methods

(2018) Yanan Zhou et al.   JOURNAL OF PROSTHETIC DENTISTRY

Microstructure and crystallographic texture of pure titanium parts generated by laser additive manufacturing

(2018) Felipe Arias-González et al.   METALS AND MATERIALS INTERNATIONAL

Laser direct writing of Co-superalloy lines for micro-fabrication applications

(2018) Jesús del Val et al.   SURFACE & COATINGS TECHNOLOGY

Milling of maraging steel components produced by selective laser melting

(2017) Alessandro Fortunato et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Bond strengths of porcelain to cobalt-chromium alloys made by casting, milling, and selective laser melting

(2017) Jieyin Li et al.   JOURNAL OF PROSTHETIC DENTISTRY

Developing high strength and ductility in biomedical Co–Cr cast alloys by simultaneous doping with nitrogen and carbon

(2016) Kenta Yamanaka et al.   Acta Biomaterialia

Fiber laser cladding of nickel-based alloy on cast iron

(2016) F. Arias-González et al.   APPLIED SURFACE SCIENCE

Failure mechanisms in CoCrMo modular femoral stems for revision total hip arthroplasty

(2016) Qiong Wang et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Comparison of the microstructure and phase stability of as-cast, CAD/CAM and powder metallurgy manufactured Co–Cr dental alloys

(2015) Kai Chun Li et al.   DENTAL MATERIALS

Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting

(2015) B. Qian et al.   DENTAL MATERIALS

Assessment of precipitation behavior in dental castings of a Co–Cr–Mo alloy

(2015) Kenta Yamanaka et al.   Journal of the Mechanical Behavior of Biomedical Materials

Experimental study of porosity reduction in high deposition-rate Laser Material Deposition

(2015) Chongliang Zhong et al.   OPTICS AND LASER TECHNOLOGY

Selective Laser Melting Technique of Co-Cr Dental Alloys: A Review of Structure and Properties and Comparative Analysis with Other Available Techniques

(2015) Theodoros Koutsoukis et al.   Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry

Toward Smart Implant Synthesis: Bonding Bioceramics of Different Resorbability to Match Bone Growth Rates

(2015) Rafael Comesaña et al.   Scientific Reports

Review of selective laser melting: Materials and applications

(2015) C. Y. Yap et al.   Applied Physics Reviews

Metallurgical and interfacial characterization of PFM Co–Cr dental alloys fabricated via casting, milling or selective laser melting

(2014) Y.S. Al Jabbari et al.   DENTAL MATERIALS

Surface characteristics and corrosion properties of selective laser melted Co–Cr dental alloy after porcelain firing

(2014) X-Z. Xin et al.   DENTAL MATERIALS

Laser-deposited CoCrMo alloy: Microstructure, wear, and electrochemical properties

(2014) Kedar M. Mantrala et al.   JOURNAL OF MATERIALS RESEARCH

Build direction dependence of microstructure and high-temperature tensile property of Co–Cr–Mo alloy fabricated by electron beam melting

(2013) Shi-Hai Sun et al.   ACTA MATERIALIA

Fatigue Fracture in Dual Modular Revision Total Hip Arthroplasty Stems

(2013) Pontus Norman et al.   JOURNAL OF ARTHROPLASTY

Microstructures and mechanical properties of Co–29Cr–6Mo alloy fabricated by selective laser melting process for dental applications

(2013) Atsushi Takaichi et al.   Journal of the Mechanical Behavior of Biomedical Materials

Development of new Co–Cr–W-based biomedical alloys: Effects of microalloying and thermomechanical processing on microstructures and mechanical properties

(2013) Kenta Yamanaka et al.   MATERIALS & DESIGN

Annealing of Co-Cr dental alloy: effects on nanostructure and Rockwell hardness

(2013) Simel Ayyıldız et al.   Journal of Advanced Prosthodontics

Deformation induced FCC to HCP transformation in a Co–27Cr–5Mo–0.05C alloy

(2010) A. Mani et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Design and fabrication of CoCrMo alloy based novel structures for load bearing implants using laser engineered net shaping

(2009) Félix A. España et al.   Materials Science & Engineering C-Materials for Biological Applications