Experimental Characterization Protocols for Wear Products from Disc Brake Materials
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Experimental Characterization Protocols for Wear Products from Disc Brake Materials
Authors
Keywords
-
Journal
Atmosphere
Volume 11, Issue 10, Pages 1102
Publisher
MDPI AG
Online
2020-10-15
DOI
10.3390/atmos11101102
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Source apportionment of metallic elements in urban atmospheric particulate matter and assessment of its water-soluble fraction toxicity
- (2020) Darlan Daniel Alves et al. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
- Positive matrix factorization of ultrafine particle mass (PM0.1) at three sites in California
- (2020) Wei Xue et al. SCIENCE OF THE TOTAL ENVIRONMENT
- Grey Cast Iron Brake Discs Laser Cladded with Nickel-Tungsten Carbide—Friction, Wear and Airborne Wear Particle Emission
- (2020) Senad Dizdar et al. Atmosphere
- Thermal behavior of a phenolic resin for brake pad manufacturing
- (2019) C. Menapace et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Study of Brake Wear Particle Emissions: Impact of Braking and Cruising Conditions
- (2019) Ferdinand H. Farwick zum Hagen et al. ENVIRONMENTAL SCIENCE & TECHNOLOGY
- A proposed driving cycle for brake emissions investigation for test stand
- (2019) Guido Perricone et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
- A critical comparison of dynamometer data with pin-on-disc data for the same two friction material pairs – A case study
- (2019) Matteo Federici et al. WEAR
- A Test Stand Study on the Volatile Emissions of a Passenger Car Brake Assembly
- (2019) Perricone et al. Atmosphere
- Friction material composite: types of brake friction material formulations and effects of various ingredients on brake performance – a review
- (2019) Vineeth Kumar V et al. Materials Research Express
- Characterization of airborne wear debris produced by brake pads pressed against HVOF-coated discs
- (2019) C. Menapace et al. Friction
- The source apportionment, pollution characteristic and mobility of Sb in roadside soils affected by traffic and industrial activities
- (2019) Geng Yan et al. JOURNAL OF HAZARDOUS MATERIALS
- On-road vehicle measurements of brake wear particle emissions
- (2019) Ferdinand H. Farwick zum Hagen et al. ATMOSPHERIC ENVIRONMENT
- A study of brake contact pairs under different friction conditions with respect to characteristics of brake pad surfaces
- (2019) L. Wei et al. TRIBOLOGY INTERNATIONAL
- Uncommon chemical species in PM2.5 and PM10 and its potential use as industrial and vehicular markers for source apportionment studies
- (2019) Elson Silva Galvão et al. CHEMOSPHERE
- Friction, wear and airborne particle emission from Cu-free brake materials
- (2019) Yezhe Lyu et al. TRIBOLOGY INTERNATIONAL
- Chemical characterization and quantitativ e assessment of source-specific health risk of trace metals in PM1.0 at a road site of Delhi, India
- (2018) Jai Prakash et al. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
- Characterization and preliminary risk assessment of road dust collected in Venice airport (Italy)
- (2018) Gabrio Valotto et al. JOURNAL OF GEOCHEMICAL EXPLORATION
- Spatial distribution patterns of four traffic-emitted heavy metals in urban road dust and the resuspension of brake-emitted particles: Findings of a field study
- (2018) Péter Budai et al. TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT
- A concept for reducing PM 10 emissions for car brakes by 50%
- (2018) Guido Perricone et al. WEAR
- Friction instability induced by iron and iron oxides on friction material surface
- (2018) H.J. Noh et al. WEAR
- On the influence of car brake system parameters on particulate matter emissions
- (2018) Mattia Alemani et al. WEAR
- Dry sliding behavior and friction layer formation in copper-free barite containing friction materials
- (2018) Cinzia Menapace et al. WEAR
- A preliminary investigation on the use of the pin-on-disc test to simulate off-brake friction and wear characteristics of friction materials
- (2018) Matteo Federici et al. WEAR
- Temporal and spatial variability of traffic-related PM2.5 sources: Comparison of exhaust and non-exhaust emissions
- (2018) Cheol-Heon Jeong et al. ATMOSPHERIC ENVIRONMENT
- Automotive brake wear: a review
- (2017) Syed M. S. Wahid ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
- Characterization of nanograined powder samples using the Rietveld method applied to electron diffraction ring patterns
- (2017) A. Serafini et al. POWDER DIFFRACTION
- Pin-on-disc study of a friction material dry sliding against HVOF coated discs at room temperature and 300 °C
- (2017) Matteo Federici et al. TRIBOLOGY INTERNATIONAL
- On the running-in of brake pads and discs for dyno bench tests
- (2017) Vlastimil Matějka et al. TRIBOLOGY INTERNATIONAL
- Towards a better understanding of the structures existing on the surface of brake pads
- (2017) P.D. Neis et al. TRIBOLOGY INTERNATIONAL
- Dry sliding of a low steel friction material against cast iron at different loads: Characterization of the friction layer and wear debris
- (2017) M. Alemani et al. WEAR
- Quantification of ultrafine airborne particulate matter generated by the wear of car brake materials
- (2017) Oleksii Nosko et al. WEAR
- Pin-on-disc study of brake friction materials with ball-milled nanostructured components
- (2017) Cinzia Menapace et al. MATERIALS & DESIGN
- Emission of 1.3–10 nm airborne particles from brake materials
- (2016) Oleksii Nosko et al. AEROSOL SCIENCE AND TECHNOLOGY
- Detection of brake wear aerosols by aerosol time-of-flight mass spectrometry
- (2016) D.C.S. Beddows et al. ATMOSPHERIC ENVIRONMENT
- Laboratory testing of airborne brake wear particle emissions using a dynamometer system under urban city driving cycles
- (2016) Hiroyuki Hagino et al. ATMOSPHERIC ENVIRONMENT
- Toxicity and mutagenicity of low-metallic automotive brake pad materials
- (2016) Katerina Malachova et al. ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY
- Heavy metals from non-exhaust vehicle emissions in urban and motorway road dusts
- (2016) Ewa Adamiec et al. ENVIRONMENTAL MONITORING AND ASSESSMENT
- Towards a test stand for standardized measurements of the brake emissions
- (2016) Guido Perricone et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
- Towards the ranking of airborne particle emissions from car brakes – a system approach
- (2016) Guido Perricone et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
- Material characterisation of lightweight disc brake rotors
- (2016) Abdulwahab A Alnaqi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
- Wear debris from brake system materials: A multi-analytical characterization approach
- (2016) Piyush Chandra Verma et al. TRIBOLOGY INTERNATIONAL
- Development of copper-free eco-friendly brake-friction material using novel ingredients
- (2016) N. Aranganathan et al. WEAR
- Wear behavior of a low metallic friction material dry sliding against a cast iron disc: Role of the heat-treatment of the disc
- (2016) Giovanni Straffelini et al. WEAR
- Role of the friction layer in the high-temperature pin-on-disc study of a brake material
- (2016) Piyush Chandra Verma et al. WEAR
- Review of receptor modeling methods for source apportionment
- (2016) Philip K. Hopke JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION
- Physico-Chemical Characterization and Oxidative Reactivity Evaluation of Aged Brake Wear Particles
- (2015) Jiayuan Zhao et al. AEROSOL SCIENCE AND TECHNOLOGY
- Present knowledge and perspectives on the role of copper in brake materials and related environmental issues: A critical assessment
- (2015) Giovanni Straffelini et al. ENVIRONMENTAL POLLUTION
- Role of constituents of friction materials on their sliding behavior between room temperature and 400°C
- (2015) Fatima Eddoumy et al. MATERIALS & DESIGN
- The PM 10 fraction of road dust in the UK and India: Characterization, source profiles and oxidative potential
- (2015) Pallavi Pant et al. SCIENCE OF THE TOTAL ENVIRONMENT
- Braking pad-disc system: Wear mechanisms and formation of wear fragments
- (2015) Piyush Chandra Verma et al. WEAR
- Airborne brake wear particle emission due to braking and accelerating
- (2015) Hiroyuki Hagino et al. WEAR
- Elemental composition of current automotive braking materials and derived air emission factors
- (2014) J.H.J. Hulskotte et al. ATMOSPHERIC ENVIRONMENT
- Brake wear particle emissions: a review
- (2014) Theodoros Grigoratos et al. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
- Urban air quality: The challenge of traffic non-exhaust emissions
- (2014) Fulvio Amato et al. JOURNAL OF HAZARDOUS MATERIALS
- Study of the interaction between microstructure, mechanical and tribo-performance of a commercial brake lining material
- (2014) Amira Sellami et al. MATERIALS & DESIGN
- Transmission Electron Microscopy as Best Technique for Characterization in Nanotechnology
- (2014) Mohsen Asadi Asadabad et al. Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal Chemistry
- Tribological screening tests for the selection of raw materials for automotive brake pad formulations
- (2014) W. Österle et al. TRIBOLOGY INTERNATIONAL
- Effects of humidity and corrosion on the tribological behaviour of the brake disc materials
- (2014) M. Djafri et al. WEAR
- Effects of antimony trisulfide (Sb2S3) on sliding friction of automotive brake friction materials
- (2013) Wan Kyu Lee et al. METALS AND MATERIALS INTERNATIONAL
- Characterization of non-exhaust coarse and fine particles from on-road driving and laboratory measurements
- (2013) Ji-hyun Kwak et al. SCIENCE OF THE TOTAL ENVIRONMENT
- Water suspended nanosized particles released from nonairborne brake wear debris
- (2013) P. Peikertová et al. WEAR
- The relationship between wear of semimetallic friction materials and pearlitic cast iron in dry sliding
- (2013) G. Straffelini et al. WEAR
- Nanoparticle emissions from 11 non-vehicle exhaust sources – A review
- (2012) Prashant Kumar et al. ATMOSPHERIC ENVIRONMENT
- Speciation of Sb in airborne particulate matter, vehicle brake linings, and brake pad wear residues
- (2012) D. Varrica et al. ATMOSPHERIC ENVIRONMENT
- Estimation of the Contributions of Brake Dust, Tire Wear, and Resuspension to Nonexhaust Traffic Particles Derived from Atmospheric Measurements
- (2012) Roy M. Harrison et al. ENVIRONMENTAL SCIENCE & TECHNOLOGY
- Characterization of airborne particulate matter collected at Jakarta roadside of an arterial road
- (2012) M. Santoso et al. JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY
- Source apportionment of ambient particles: Comparison of positive matrix factorization analysis applied to particle size distribution and chemical composition data
- (2011) Jianwei Gu et al. ATMOSPHERIC ENVIRONMENT
- On airborne nano/micro-sized wear particles released from low-metallic automotive brakes
- (2011) Jana Kukutschová et al. ENVIRONMENTAL POLLUTION
- PMF Analysis of Wide-Range Particle Size Spectra Collected on a Major Highway
- (2011) Roy M. Harrison et al. ENVIRONMENTAL SCIENCE & TECHNOLOGY
- A pin-on-disc investigation of novel nanoporous composite-based and conventional brake pad materials focussing on airborne wear particles
- (2011) J. Wahlström et al. TRIBOLOGY INTERNATIONAL
- Functionality of conventional brake friction materials – Perceptions from findings observed at different length scales
- (2011) W. Österle et al. WEAR
- The effects of cryogenic processing on the wear resistance of grey cast iron brake discs
- (2011) R. Thornton et al. WEAR
- Cardiovascular Effects of Ambient Particulate Air Pollution Exposure
- (2010) Qinghua Sun et al. CIRCULATION
- Investigation of surface film nanostructure and assessment of its impact on friction force stabilization during automotive braking
- (2010) Werner Österle et al. International Journal of Materials Research
- On the role of copper in brake friction materials
- (2010) W. Österle et al. TRIBOLOGY INTERNATIONAL
- A TEM snapshot of magnetite formation in brakes: The role of the disc's cast iron graphite lamellae in third body formation
- (2010) Ruth Hinrichs et al. WEAR
- Identification of brake wear particles and derivation of a quantitative tracer for brake dust at a major road
- (2009) Johanna K. Gietl et al. ATMOSPHERIC ENVIRONMENT
- A Study of Airborne Wear Particles Generated From a Sliding Contact
- (2009) Ulf Olofsson et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- A disc brake test stand for measurement of airborne wear particles
- (2009) Jens Wahlström et al. Lubrication Science
- Comparative study of mechanical and tribological properties of alumina coatings formed on aluminium in various conditions
- (2009) W. Bensalah et al. MATERIALS & DESIGN
- Toxic effects of brake wear particles on epithelial lung cells in vitro
- (2009) Michael Gasser et al. Particle and Fibre Toxicology
- Airborne wear particles from passenger car disc brakes: A comparison of measurements from field tests, a disc brake assembly test stand, and a pin-on-disc machine
- (2009) J Wahlström et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Wear mechanism in automotive brake materials, wear debris and its potential environmental impact
- (2009) J. Kukutschová et al. WEAR
- A comprehensive microscopic study of third body formation at the interface between a brake pad and brake disc during the final stage of a pin-on-disc test
- (2009) W. Österle et al. WEAR
- Wear performance and wear debris of semimetallic automotive brake materials
- (2009) Jana Kukutschová et al. WEAR
- A pin-on-disc simulation of airborne wear particles from disc brakes
- (2009) Jens Wahlström et al. WEAR
- Disruption of iron homeostasis and lung disease
- (2008) Andrew J. Ghio BIOCHIMICA ET BIOPHYSICA ACTA-GENERAL SUBJECTS
- Emission Factor for Antimony in Brake Abrasion Dusts as One of the Major Atmospheric Antimony Sources
- (2008) Akihiro Iijima et al. ENVIRONMENTAL SCIENCE & TECHNOLOGY
- Source apportionment of particulate matter in Europe: A review of methods and results
- (2008) M. Viana et al. JOURNAL OF AEROSOL SCIENCE
- Sources and properties of non-exhaust particulate matter from road traffic: A review
- (2008) Alistair Thorpe et al. SCIENCE OF THE TOTAL ENVIRONMENT
- Size distribution and total number concentration of ultrafine and accumulation mode particles and hospital admissions in children and the elderly in Copenhagen, Denmark
- (2007) Z J Andersen et al. OCCUPATIONAL AND ENVIRONMENTAL MEDICINE
- Wear and environmental aspects of composite materials for automotive braking industry
- (2007) Vaclav Roubicek et al. WEAR
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started