Molecular Engineering and Morphology Control of Polythiophene:Nonfullerene Acceptor Blends for High‐Performance Solar Cells

Development of Block Copolymers with Poly(3-hexylthiophene) Segments as Compatibilizers in Non-Fullerene Organic Solar Cells

(2020) Yu-An Su et al.   ACS Applied Materials & Interfaces

Graphdiyne Derivative as Multifunctional Solid Additive in Binary Organic Solar Cells with 17.3% Efficiency and High Reproductivity

(2020) Le Liu et al.   ADVANCED MATERIALS

Design Principles and Synergistic Effects of Chlorination on a Conjugated Backbone for Efficient Organic Photovoltaics: A Critical Review

(2020) Gururaj P. Kini et al.   ADVANCED MATERIALS

Glass transition temperature from the chemical structure of conjugated polymers

(2020) Renxuan Xie et al.   Nature Communications

3,4‐Dicyanothiophene—a Versatile Building Block for Efficient Nonfullerene Polymer Solar Cells

(2020) Bo Zhang et al.   Advanced Energy Materials

Sequential Blade‐Coated Acceptor and Donor Enables Simultaneous Enhancement of Efficiency, Stability, and Mechanical Properties for Organic Solar Cells

(2020) Yilin Wang et al.   Advanced Energy Materials

18% Efficiency organic solar cells

(2020) Qishi Liu et al.   Science Bulletin

A Novel Wide‐Bandgap Polymer with Deep Ionization Potential Enables Exceeding 16% Efficiency in Ternary Nonfullerene Polymer Solar Cells

(2020) Ying Zhang et al.   ADVANCED FUNCTIONAL MATERIALS

Asymmetric Electron Acceptors for High‐Efficiency and Low‐Energy‐Loss Organic Photovoltaics

(2020) Shuixing Li et al.   ADVANCED MATERIALS

Single‐Junction Organic Photovoltaic Cells with Approaching 18% Efficiency

(2020) Yong Cui et al.   ADVANCED MATERIALS

High Performance All‐Polymer Solar Cells with the Polymer Acceptor Synthesized via a Random Ternary Copolymerization Strategy

(2020) Yongfang Li et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Influence of the Ester Directing Group on the Inhibition of Defect Formation in Polythiophenes with Direct Arylation Polymerization (DArP)

(2020) Robert M. Pankow et al.   MACROMOLECULES

Multiamorphous Phases in Diketopyrrolopyrrole-Based Conjugated Polymers: From Bulk to Ultrathin Films

(2020) Shaochuan Luo et al.   MACROMOLECULES

Solution‐Processed Polymer Solar Cells with over 17% Efficiency Enabled by an Iridium Complexation Approach

(2020) Tao Wang et al.   Advanced Energy Materials

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

(2020) Lei Zhu et al.   Advanced Energy Materials

High‐Performance Semitransparent Organic Solar Cells with Excellent Infrared Reflection and See‐Through Functions

(2020) Di Wang et al.   ADVANCED MATERIALS

14.4% efficiency all-polymer solar cell with broad absorption and low energy loss enabled by a novel polymer acceptor

(2020) Tao Jia et al.   Nano Energy

Optimization Requirements of Efficient Polythiophene:Nonfullerene Organic Solar Cells

(2020) Ziqi Liang et al.   Joule

Controlling Molecular Mass of Low-Band-Gap Polymer Acceptors for High-Performance All-Polymer Solar Cells

(2020) Wei Wang et al.   Joule

Investigating the effect of cosolvents on P3HT/O-IDTBR film-forming kinetics and film morphology

(2020) Jiangang Liu et al.   Journal of Energy Chemistry

Separating Crystallization Process of P3HT and O-IDTBR to Construct Highly Crystalline Interpenetrating Network with Optimized Vertical Phase Separation

(2019) Qiuju Liang et al.   ADVANCED FUNCTIONAL MATERIALS

Simplified synthetic routes for low cost and high photovoltaic performance n-type organic semiconductor acceptors

(2019) Xiaojun Li et al.   Nature Communications

Achieving over 16% efficiency for single-junction organic solar cells

(2019) Baobing Fan et al.   Science China-Chemistry

Cyano-Substituted Head-to-Head Polythiophenes: Enabling High-Performance n-Type Organic Thin-Film Transistors

(2019) Hang Wang et al.   ACS Applied Materials & Interfaces

Enhanced JSC of P3HT-based non-fullerene polymer solar cells by modulating aggregation effect of P3HT in solution state

(2019) Chenyi Yang et al.   ORGANIC ELECTRONICS

11.2% Efficiency all-polymer solar cells with high open-circuit voltage

(2019) Yuan Meng et al.   Science China-Chemistry

Single‐Junction Polymer Solar Cells with 16.35% Efficiency Enabled by a Platinum(II) Complexation Strategy

(2019) Xiaopeng Xu et al.   ADVANCED MATERIALS

Carboxylate-Substituted Polythiophenes for Efficient Fullerene-Free Polymer Solar Cells: The Effect of Chlorination on Their Properties

(2019) Qi Wang et al.   MACROMOLECULES

Noncovalently fused-ring electron acceptors with near-infrared absorption for high-performance organic solar cells

(2019) Hao Huang et al.   Nature Communications

Simple non-fused electron acceptors for efficient and stable organic solar cells

(2019) Zhi-Peng Yu et al.   Nature Communications

Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages

(2019) Yong Cui et al.   Nature Communications

Slot-die printed non-fullerene organic solar cells with the highest efficiency of 12.9% for low-cost PV-driven water splitting

(2019) Qiang Wu et al.   Nano Energy

A General Approach for Lab‐to‐Manufacturing Translation on Flexible Organic Solar Cells

(2019) Xiangchuan Meng et al.   ADVANCED MATERIALS

Slot‐Die and Roll‐to‐Roll Processed Single Junction Organic Photovoltaic Cells with the Highest Efficiency

(2019) Jeongjoo Lee et al.   Advanced Energy Materials

Perylene Diimide Based Organic Photovoltaics with Slot-Die Coated Active Layers from Halogen-Free Solvents in Air at Room Temperature

(2019) Francesco Tintori et al.   ACS Applied Materials & Interfaces

Aqueous-Soluble Naphthalene Diimide-Based Polymer Acceptors for Efficient and Air-Stable All-Polymer Solar Cells

(2019) Seungjin Lee et al.   ACS Applied Materials & Interfaces

Processing-Friendly Slot-Die-Cast Nonfullerene Organic Solar Cells with Optimized Morphology

(2019) Heng Zhao et al.   ACS Applied Materials & Interfaces

P3HT‐Based Polymer Solar Cells with 8.25% Efficiency Enabled by a Matched Molecular Acceptor and Smart Green‐Solvent Processing Technology

(2019) Xiaopeng Xu et al.   ADVANCED MATERIALS

A Trialkylsilylthienyl Chain-Substituted Small-Molecule Acceptor with Higher LUMO Level and Reduced Band Gap for Over 16% Efficiency Fullerene-Free Ternary Solar Cells

(2019) Dan Su et al.   CHEMISTRY OF MATERIALS

14%-efficiency fullerene-free ternary solar cell enabled by designing a short side-chain substituted small-molecule acceptor

(2019) Yuan Chang et al.   Nano Energy

Aqueous-Alcohol-Processable High-Mobility Semiconducting Copolymers with Engineered Oligo(ethylene glycol) Side Chains

(2019) Boseok Kang et al.   CHEMISTRY OF MATERIALS

Chlorination strategy on polymer donors toward efficient solar conversions

(2019) Pengjie Chao et al.   Journal of Energy Chemistry

17% efficiency organic photovoltaic cell with superior processability

(2019) Yong Cui et al.   National Science Review

Diketopyrrolopyrrole-Based Conjugated Polymers Synthesized via Direct Arylation Polycondensation for High Mobility Pure n-Channel Organic Field-Effect Transistors

(2018) Kai Guo et al.   ADVANCED FUNCTIONAL MATERIALS

Surpassing 10% Efficiency Benchmark for Nonfullerene Organic Solar Cells by Scalable Coating in Air from Single Nonhalogenated Solvent

(2018) Long Ye et al.   ADVANCED MATERIALS

Over 14% Efficiency in Polymer Solar Cells Enabled by a Chlorinated Polymer Donor

(2018) Shaoqing Zhang et al.   ADVANCED MATERIALS

Enhancing the Performance of Organic Solar Cells by Hierarchically Supramolecular Self-Assembly of Fused-Ring Electron Acceptors

(2018) Yahui Liu et al.   CHEMISTRY OF MATERIALS

Critical Role of Molecular Electrostatic Potential on Charge Generation in Organic Solar Cells

(2018) Huifeng Yao et al.   CHINESE JOURNAL OF CHEMISTRY

P3HT: non-fullerene acceptor based large area, semi-transparent PV modules with power conversion efficiencies of 5%, processed by industrially scalable methods

(2018) S. Strohm et al.   Energy & Environmental Science

Direct Calorimetric Observation of the Rigid Amorphous Fraction in a Semiconducting Polymer

(2018) Jaime Martín et al.   Journal of Physical Chemistry Letters

Quantitative relations between interaction parameter, miscibility and function in organic solar cells

(2018) Long Ye et al.   NATURE MATERIALS

Direct arylation polymerization: A guide to optimal conditions for effective conjugated polymers

(2018) Nemal S. Gobalasingham et al.   PROGRESS IN POLYMER SCIENCE

Fluorination vs. chlorination: a case study on high performance organic photovoltaic materials

(2018) Yun Zhang et al.   Science China-Chemistry

The meniscus-guided deposition of semiconducting polymers

(2018) Xiaodan Gu et al.   Nature Communications

Ternary Organic Solar Cells With 12.8% Efficiency Using Two Nonfullerene Acceptors With Complementary Absorptions

(2018) Bin Kan et al.   Advanced Energy Materials

Miscibility-Function Relations in Organic Solar Cells: Significance of Optimal Miscibility in Relation to Percolation

(2018) Long Ye et al.   Advanced Energy Materials

Progress in Poly (3-Hexylthiophene) Organic Solar Cells and the Influence of Its Molecular Weight on Device Performance

(2018) Andrew Wadsworth et al.   Advanced Energy Materials

Efficient Ternary Polymer Solar Cells with Two Well-Compatible Donors and One Ultranarrow Bandgap Nonfullerene Acceptor

(2018) Xiaoling Ma et al.   Advanced Energy Materials

Recent Progress in Ternary Organic Solar Cells Based on Nonfullerene Acceptors

(2018) Runnan Yu et al.   Advanced Energy Materials

Synergistic effects of chlorination and a fully two-dimensional side-chain design on molecular energy level modulation toward non-fullerene photovoltaics

(2018) Pengjie Chao et al.   Journal of Materials Chemistry A

Near-infrared absorbing non-fullerene acceptors with selenophene as π bridges for efficient organic solar cells

(2018) Ziqi Liang et al.   Journal of Materials Chemistry A

The progress and prospects of non-fullerene acceptors in ternary blend organic solar cells

(2018) Weidong Xu et al.   Materials Horizons

A Near-Infrared Photoactive Morphology Modifier Leads to Significant Current Improvement and Energy Loss Mitigation for Ternary Organic Solar Cells

(2018) Lingling Zhan et al.   Advanced Science

A2–A1–D–A1–A2 Type Non-Fullerene Acceptors with 2-(1,1-Dicyanomethylene)rhodanine as the Terminal Groups for Poly(3-hexylthiophene)-Based Organic Solar Cells

(2018) Bo Xiao et al.   ACS Applied Materials & Interfaces

The Crucial Role of Chlorinated Thiophene Orientation in Conjugated Polymers for Photovoltaic Devices

(2018) Yanan Wu et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Enhanced Charge Transfer between Fullerene and Non-Fullerene Acceptors Enables Highly Efficient Ternary Organic Solar Cells

(2018) Lingling Zhan et al.   ACS Applied Materials & Interfaces

High Performance Roll-to-Roll Produced Fullerene-Free Organic Photovoltaic Devices via Temperature-Controlled Slot Die Coating

(2018) Seok-In Na et al.   ADVANCED FUNCTIONAL MATERIALS

Large-Area Organic Solar Cells: Material Requirements, Modular Designs, and Printing Methods

(2018) Guodong Wang et al.   ADVANCED MATERIALS

Efficient Ternary Organic Solar Cells with Two Compatible Non-Fullerene Materials as One Alloyed Acceptor

(2018) Qiaoshi An et al.   Small

Simultaneous Enhancement of Three Parameters of P3HT-Based Organic Solar Cells with One Oxygen Atom

(2018) Jianfei Wu et al.   Advanced Energy Materials

Efficient and Air-Stable Aqueous-Processed Organic Solar Cells and Transistors: Impact of Water Addition on Processability and Thin-Film Morphologies of Electroactive Materials

(2018) Changyeon Lee et al.   Advanced Energy Materials

Alternating 5,5-Dimethylcyclopentadiene and Diketopyrrolopyrrole Copolymer Prepared at Room Temperature for High Performance Organic Thin-Film Transistors

(2017) Zhuping Fei et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Exploiting Noncovalently Conformational Locking as a Design Strategy for High Performance Fused-Ring Electron Acceptor Used in Polymer Solar Cells

(2017) Yahui Liu et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Unravelling the Thermomechanical Properties of Bulk Heterojunction Blends in Polymer Solar Cells

(2017) Anirudh Sharma et al.   MACROMOLECULES

Ethanol-Processable, Highly Crystalline Conjugated Polymers for Eco-Friendly Fabrication of Organic Transistors and Solar Cells

(2017) Thanh Luan Nguyen et al.   MACROMOLECULES

Glass Transition Temperature of Conjugated Polymers by Oscillatory Shear Rheometry

(2017) Renxuan Xie et al.   MACROMOLECULES

P3HT-Based Photovoltaic Cells with a High Voc of 1.22 V by Using a Benzotriazole-Containing Nonfullerene Acceptor End-Capped with Thiazolidine-2,4-dione

(2017) Bo Xiao et al.   ACS Macro Letters

Poly(3-hexylthiophene)-based non-fullerene solar cells achieve high photovoltaic performance with small energy loss

(2017) Feng Liu et al.   Journal of Materials Chemistry A

Fluorinated Head-to-Head Dialkoxybithiophene: A New Electron-Donating Building Block for High-Performance Polymer Semiconductors

(2017) Jun Huang et al.   Advanced Electronic Materials

The Influence of Backbone Fluorination on the Dielectric Constant of Conjugated Polythiophenes

(2017) Pierre Boufflet et al.   Advanced Electronic Materials

Fullerene-Free Polymer Solar Cells with Open-Circuit Voltage above 1.2 V: Tuning Phase Separation Behavior with Oligomer to Replace Polymer Acceptor

(2016) Yingying Fu et al.   ADVANCED FUNCTIONAL MATERIALS

Highly Efficient Fullerene-Free Polymer Solar Cells Fabricated with Polythiophene Derivative

(2016) Yunpeng Qin et al.   ADVANCED MATERIALS

Ternary-Blend Polymer Solar Cells Combining Fullerene and Nonfullerene Acceptors to Synergistically Boost the Photovoltaic Performance

(2016) Heng Lu et al.   ADVANCED MATERIALS

Ternary Organic Solar Cells Based on Two Compatible Nonfullerene Acceptors with Power Conversion Efficiency >10%

(2016) Tao Liu et al.   ADVANCED MATERIALS

Development of isomer-free fullerene bisadducts for efficient polymer solar cells

(2016) Zuo Xiao et al.   Energy & Environmental Science

A spirobifluorene and diketopyrrolopyrrole moieties based non-fullerene acceptor for efficient and thermally stable polymer solar cells with high open-circuit voltage

(2016) Shuixing Li et al.   Energy & Environmental Science

Nickel-Catalyzed Suzuki Polycondensation for Controlled Synthesis of Ester-Functionalized Conjugated Polymers

(2016) Yunyan Qiu et al.   MACROMOLECULES

Molecular Orientation and Phase Separation by Controlling Chain Segment and Molecule Movement in P3HT/N2200 Blends

(2016) Rui Zhang et al.   MACROMOLECULES

Systematic Fluorination of P3HT: Synthesis of P(3HT-co-3H4FT)s by Direct Arylation Polymerization, Characterization, and Device Performance in OPVs

(2016) Patrick D. Homyak et al.   MACROMOLECULES

Measuring the Degree of Crystallinity in Semicrystalline Regioregular Poly(3-hexylthiophene)

(2016) Xiaobo Shen et al.   MACROMOLECULES

Green-solvent-processable organic solar cells

(2016) Shaoqing Zhang et al.   Materials Today

Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells

(2016) Derya Baran et al.   NATURE MATERIALS

Palladium-catalyzed oxidative direct arylation polymerization (Oxi-DArP) of an ester-functionalized thiophene

(2016) Nemal S. Gobalasingham et al.   Polymer Chemistry

Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells

(2016) Dan Deng et al.   Nature Communications

High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor

(2016) Sarah Holliday et al.   Nature Communications

Achievement of High V oc of 1.02 V for P3HT-Based Organic Solar Cell Using a Benzotriazole-Containing Non-Fullerene Acceptor

(2016) Bo Xiao et al.   Advanced Energy Materials

Triperylene Hexaimides Based All-Small-Molecule Solar Cells with an Efficiency over 6% and Open Circuit Voltage of 1.04 V

(2016) Ningning Liang et al.   Advanced Energy Materials

A non-fullerene electron acceptor modified by thiophene-2-carbonitrile for solution-processed organic solar cells

(2016) Shuixing Li et al.   Journal of Materials Chemistry A

Fullerene-free polymer solar cell based on a polythiophene derivative with an unprecedented energy loss of less than 0.5 eV

(2016) Hao Zhang et al.   Journal of Materials Chemistry A

High-Performance Non-Fullerene Organic Solar Cells Based on a Selenium-Containing Polymer Donor and a Twisted Perylene Bisimide Acceptor

(2016) Tao Liu et al.   Advanced Science

Influence of Molecular Geometry of Perylene Diimide Dimers and Polymers on Bulk Heterojunction Morphology Toward High-Performance Nonfullerene Polymer Solar Cells

(2015) Chen-Hao Wu et al.   ADVANCED FUNCTIONAL MATERIALS

Spiro Linkage as an Alternative Strategy for Promising Nonfullerene Acceptors in Organic Solar Cells

(2015) Xiao-Feng Wu et al.   ADVANCED FUNCTIONAL MATERIALS

Oligomeric Donor Material for High-Efficiency Organic Solar Cells: Breaking Down a Polymer

(2015) Liu Yuan et al.   ADVANCED MATERIALS

High Mobility Ambipolar Diketopyrrolopyrrole-Based Conjugated Polymer Synthesized Via Direct Arylation Polycondensation

(2015) Yao Gao et al.   ADVANCED MATERIALS

An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells

(2015) Yuze Lin et al.   ADVANCED MATERIALS

Phase Diagram of Conjugated Polymer Blend P3HT/PF12TBT and the Morphology-Dependent Photovoltaic Performance

(2015) Ke Zhou et al.   Journal of Physical Chemistry C

Determining the Role of Polymer Molecular Weight for High-Performance All-Polymer Solar Cells: Its Effect on Polymer Aggregation and Phase Separation

(2015) Hyunbum Kang et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

A Rhodanine Flanked Nonfullerene Acceptor for Solution-Processed Organic Photovoltaics

(2015) Sarah Holliday et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Conjugated Polymer–Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells

(2015) Jianqi Zhang et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Non-Fullerene-Acceptor-Based Bulk-Heterojunction Organic Solar Cells with Efficiency over 7%

(2015) Dan Sun et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

“All That Glisters Is Not Gold”: An Analysis of the Synthetic Complexity of Efficient Polymer Donors for Polymer Solar Cells

(2015) Riccardo Po et al.   MACROMOLECULES

In Situ Characterization of Polymer–Fullerene Bilayer Stability

(2015) Deborah Leman et al.   MACROMOLECULES

Status and prospects for ternary organic photovoltaics

(2015) Luyao Lu et al.   Nature Photonics

High-performance multiple-donor bulk heterojunction solar cells

(2015) Yang Yang et al.   Nature Photonics

Perylene and naphthalene diimide polymers for all-polymer solar cells: a comparative study of chemical copolymerization and physical blend

(2015) Shuixing Dai et al.   Polymer Chemistry

High-performance ternary blend polymer solar cells involving both energy transfer and hole relay processes

(2015) Luyao Lu et al.   Nature Communications

A solution-processable bipolar diketopyrrolopyrrole molecule used as both electron donor and acceptor for efficient organic solar cells

(2015) Hangqi Shi et al.   Journal of Materials Chemistry A

Control of Nanomorphology in All-Polymer Solar Cells via Assembling Nanoaggregation in a Mixed Solution

(2014) Wei Yu et al.   ACS Applied Materials & Interfaces

A Polythiophene Derivative with Superior Properties for Practical Application in Polymer Solar Cells

(2014) Maojie Zhang et al.   ADVANCED MATERIALS

Synthesis and Search for Design Principles of New Electron Accepting Polymers for All-Polymer Solar Cells

(2014) In Hwan Jung et al.   CHEMISTRY OF MATERIALS

Fluorination of Polythiophene Derivatives for High Performance Organic Photovoltaics

(2014) Jea Woong Jo et al.   CHEMISTRY OF MATERIALS

Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture

(2014) Florian Machui et al.   Energy & Environmental Science

Methanofullerenes, C60(CH2)n (n = 1, 2, 3), as Building Blocks for High-Performance Acceptors Used in Organic Solar Cells

(2014) Dan He et al.   ORGANIC LETTERS

A non-fullerene electron acceptor based on fluorene and diketopyrrolopyrrole building blocks for solution-processable organic solar cells with an impressive open-circuit voltage

(2014) Hemlata Patil et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Suzuki–Miyaura catalyst-transfer polycondensation with Pd(IPr)(OAc)2as the catalyst for the controlled synthesis of polyfluorenes and polythiophenes

(2014) Aiguo Sui et al.   Polymer Chemistry

Constructing vertical phase separation of polymer blends via mixed solvents to enhance their photovoltaic performance

(2014) Qingqing Yang et al.   Science China-Chemistry

A Twisted Dimeric Perylene Diimide Electron Acceptor for Efficient Organic Solar Cells

(2014) Yuze Lin et al.   Advanced Energy Materials

High open-circuit voltage polymer/polymer blend solar cells with a polyfluorene copolymer as the electron acceptor

(2014) Qingqing Yang et al.   RSC Advances

Entanglement of Conjugated Polymer Chains Influences Molecular Self-Assembly and Carrier Transport

(2013) Kui Zhao et al.   ADVANCED FUNCTIONAL MATERIALS

25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research

(2013) Letian Dou et al.   ADVANCED MATERIALS

25th Anniversary Article: Bulk Heterojunction Solar Cells: Understanding the Mechanism of Operation

(2013) Alan J. Heeger   ADVANCED MATERIALS

Effect of synthetic accessibility on the commercial viability of organic photovoltaics

(2013) Timothy P. Osedach et al.   Energy & Environmental Science

Impact of molecular solvophobicity vs. solvophilicity on device performances of dimeric perylene diimide based solution-processed non-fullerene organic solar cells

(2013) Zhenhuan Lu et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Benzodithiophene bridged dimeric perylene diimide amphiphiles as efficient solution-processed non-fullerene small molecules

(2013) Bo Jiang et al.   Polymer Chemistry

Efficiency of bulk-heterojunction organic solar cells

(2013) M.C. Scharber et al.   PROGRESS IN POLYMER SCIENCE

Towards rational design of organic electron acceptors for photovoltaics: a study based on perylenediimide derivatives

(2013) Qifan Yan et al.   Chemical Science

A Solution-Processable Electron Acceptor Based on Dibenzosilole and Diketopyrrolopyrrole for Organic Solar Cells

(2013) Yuze Lin et al.   Advanced Energy Materials

Recyclable organic solar cells on cellulose nanocrystal substrates

(2013) Yinhua Zhou et al.   Scientific Reports

Identifying the optimum composition in organic solar cells comprising non-fullerene electron acceptors

(2013) Pascal Wolfer et al.   Journal of Materials Chemistry A

Polymer/Polymer Blend Solar Cells Improved by Using High-Molecular-Weight Fluorene-Based Copolymer as Electron Acceptor

(2012) Daisuke Mori et al.   ACS Applied Materials & Interfaces

Next-Generation Polymer Solar Cell Materials: Designed Control of Interfacial Variables

(2012) Rachel Lecover et al.   ACS Nano

Improving the Performance of P3HT–Fullerene Solar Cells with Side-Chain-Functionalized Poly(thiophene) Additives: A New Paradigm for Polymer Design

(2012) Jose M. Lobez et al.   ACS Nano

A 3D star-shaped non-fullerene acceptor for solution-processed organic solar cells with a high open-circuit voltage of 1.18 V

(2012) Yuze Lin et al.   CHEMICAL COMMUNICATIONS

High efficiency polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisadduct with solvent additive

(2012) Xia Guo et al.   Energy & Environmental Science

Poly(3-hexylthiophene) and [6,6]-Phenyl-C61-butyric Acid Methyl Ester Mixing in Organic Solar Cells

(2012) Hyun Wook Ro et al.   MACROMOLECULES

n-Type Naphthalene Diimide–Biselenophene Copolymer for All-Polymer Bulk Heterojunction Solar Cells

(2012) Ye-Jin Hwang et al.   MACROMOLECULES

Roll-to-roll fabrication of polymer solar cells

(2012) Roar Søndergaard et al.   Materials Today

Polymer solar cells

(2012) Gang Li et al.   Nature Photonics

The influence of additive property on performance of organic bulk heterojunction solar cells

(2012) Jiangang Liu et al.   POLYMER BULLETIN

Ultrathin and lightweight organic solar cells with high flexibility

(2012) Martin Kaltenbrunner et al.   Nature Communications

Influence of Aggregation on the Performance of All-Polymer Solar Cells Containing Low-Bandgap Naphthalenediimide Copolymers

(2012) Marcel Schubert et al.   Advanced Energy Materials

P3HT:PCBM, Best Seller in Polymer Photovoltaic Research

(2011) Minh Trung Dang et al.   ADVANCED MATERIALS

Design of New Electron Acceptor Materials for Organic Photovoltaics: Synthesis, Electron Transport, Photophysics, and Photovoltaic Properties of Oligothiophene-Functionalized Naphthalene Diimides

(2011) Eilaf Ahmed et al.   CHEMISTRY OF MATERIALS

Role of photoactive layer morphology in high fill factor all-polymer bulk heterojunction solar cells

(2011) S. Fabiano et al.   JOURNAL OF MATERIALS CHEMISTRY

Efficient Ternary Blend Bulk Heterojunction Solar Cells with Tunable Open-Circuit Voltage

(2011) Petr P. Khlyabich et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Bulk Heterojunction Photovoltaic Active Layers via Bilayer Interdiffusion

(2011) Dian Chen et al.   NANO LETTERS

Diketopyrrolopyrrole-based acceptor polymers for photovoltaic application

(2011) Marie-France Falzon et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Downwards tuning the HOMO level of polythiophene by carboxylate substitution for high open-circuit-voltage polymer solar cells

(2011) Maojie Zhang et al.   Polymer Chemistry

Non-Fullerene Acceptor-Based Bulk Heterojunction Polymer Solar Cells: Engineering the Nanomorphology via Processing Additives

(2011) Guoqiang Ren et al.   Advanced Energy Materials

Polymer Blend Solar Cells Based on a High-Mobility Naphthalenediimide-Based Polymer Acceptor: Device Physics, Photophysics and Morphology

(2011) Jennifer R. Moore et al.   Advanced Energy Materials

Enhanced Performance in Polymer Solar Cells by Surface Energy Control

(2010) Xavier Bulliard et al.   ADVANCED FUNCTIONAL MATERIALS

Polymer-Fullerene Bulk-Heterojunction Solar Cells

(2010) Christoph J. Brabec et al.   ADVANCED MATERIALS

Spatial redistribution of the optical field intensity in inverted polymer solar cells

(2010) Fang-Chung Chen et al.   APPLIED PHYSICS LETTERS

Molecular Miscibility of Polymer−Fullerene Blends

(2010) Brian A. Collins et al.   Journal of Physical Chemistry Letters

Enhancement of P3HT/PCBM Photovoltaic Efficiency Using the Surfactant of Triblock Copolymer Containing Poly(3-hexylthiophene) and Poly(4-vinyltriphenylamine) Segments

(2010) Jung-Hsun Tsai et al.   MACROMOLECULES

Interdiffusion of PCBM and P3HT Reveals Miscibility in a Photovoltaically Active Blend

(2010) Neil D. Treat et al.   Advanced Energy Materials

Tuning Conversion Efficiency in Metallo Endohedral Fullerene-Based Organic Photovoltaic Devices

(2009) Russel B. Ross et al.   ADVANCED FUNCTIONAL MATERIALS

An inverted organic solar cell with an ultrathin Ca electron-transporting layer and MoO3 hole-transporting layer

(2009) D. W. Zhao et al.   APPLIED PHYSICS LETTERS

A Simple and Effective Way of Achieving Highly Efficient and Thermally Stable Bulk-Heterojunction Polymer Solar Cells Using Amorphous Fullerene Derivatives as Electron Acceptor

(2009) Yong Zhang et al.   CHEMISTRY OF MATERIALS

A Quantitative Study of PCBM Diffusion during Annealing of P3HT:PCBM Blend Films

(2009) Benjamin Watts et al.   MACROMOLECULES

Morphologies of Self-Organizing Regioregular Conjugated Polymer/Fullerene Aggregates in Thin Film Solar Cells

(2009) Mao-Yuan Chiu et al.   MACROMOLECULES

Binary Organic Photovoltaic Blends: A Simple Rationale for Optimum Compositions

(2008) Christian Müller et al.   ADVANCED MATERIALS

A Semi-transparent Plastic Solar Cell Fabricated by a Lamination Process

(2008) J. Huang et al.   ADVANCED MATERIALS