Surface Texturing of Prosthetic Hip Implant Bearing Surfaces: A Review

Maximizing the lubricant film thickness between a rigid microtextured and a smooth deformable surface in relative motion, using a soft elasto-hydrodynamic lubrication model

(2020) Quentin Allen et al.   JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME

Running-in friction of hip joint replacements can be significantly reduced: The effect of surface-textured acetabular cup

(2020) David Nečas et al.   Friction

The Effect of Texture Floor Profile on the Lubricant Film Thickness in a Textured Hard-On-Soft Bearing With Relevance to Prosthetic Hip Implants

(2020) Quentin Allen et al.   JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME

Tribological performances of symmetrically micro-textured Ti-6Al-4V alloy for hip joint

(2020) Tej Pratap et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

How long does a hip replacement last? A systematic review and meta-analysis of case series and national registry reports with more than 15 years of follow-up

(2019) Jonathan T Evans et al.   LANCET

Effects of surface roughness and texture on the bacterial adhesion on the bearing surface of bio-ceramic joint implants: An in vitro study

(2019) Ange Lu et al.   CERAMICS INTERNATIONAL

Life Expectancy and Mortality Rates in the United States, 1959-2017

(2019) Steven H. Woolf et al.   JAMA-JOURNAL OF THE AMERICAN MEDICAL ASSOCIATION

Tailoring of surface topography for tribological purposes by controlled solid particle impacts

(2019) Ruslan Melentiev et al.   WEAR

Representing a “revolution”: how the popular press has portrayed personalized medicine

(2018) Alessandro R Marcon et al.   GENETICS IN MEDICINE

Total Hip Arthroplasty Bearing Surface Trends in the United States From 2007 to 2014: The Rise of Ceramic on Polyethylene

(2018) Nathanael D. Heckmann et al.   JOURNAL OF ARTHROPLASTY

Increasing Burden of Total Hip Arthroplasty Revisions in Patients Between 45 and 64 Years of Age

(2018) Sean S. Rajaee et al.   JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME

Enhanced lubricant film formation through micro-dimpled hard-on-hard artificial hip joint: An in-situ observation of dimple shape effects

(2018) Dipankar Choudhury et al.   Journal of the Mechanical Behavior of Biomedical Materials

Investigation on generation of laser assisted dimples on piston ring surface and influence of dimple parameters on friction

(2018) V. Ezhilmaran et al.   SURFACE & COATINGS TECHNOLOGY

Enhanced performance of optimised partially textured load bearing surfaces

(2018) R. Rahmani et al.   TRIBOLOGY INTERNATIONAL

Microtextured CoCrMo alloy for use in metal-on-polyethylene prosthetic joint bearings: Multi-directional wear and corrosion measurements

(2018) J. Langhorn et al.   TRIBOLOGY INTERNATIONAL

Friction between a polyethylene pin and a microtextured CoCrMo disc, and its correlation to polyethylene wear, as a function of sliding velocity and contact pressure, in the context of metal-on-polyethylene prosthetic hip implants

(2018) A. Borjali et al.   TRIBOLOGY INTERNATIONAL

Sustained-release application of PCEC hydrogel on laser-textured surface lubrication

(2018) Junde Guo et al.   Materials Research Express

Projected Volume of Primary Total Joint Arthroplasty in the U.S., 2014 to 2030

(2018) Matthew Sloan et al.   JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME

Tribological Behavior of Multi-scaled Patterned Surfaces Machined Through Inclined End Milling and Micro Shot Blasting

(2018) Jesus Resendiz et al.   TRIBOLOGY LETTERS

Dimple influence on load carrying capacity of parallel surfaces

(2018) M.-P. Noutary et al.   TRIBOLOGY INTERNATIONAL

The impact of surface and geometry on coefficient of friction of artificial hip joints

(2017) Dipankar Choudhury et al.   Journal of the Mechanical Behavior of Biomedical Materials

The load carrying capacity of textured sliding bearings with elastic deformation

(2017) Binbin Su et al.   TRIBOLOGY INTERNATIONAL

Influence of geometry and the sequence of surface texturing process on tribological properties

(2017) M. Sedlaček et al.   TRIBOLOGY INTERNATIONAL

Using a patterned microtexture to reduce polyethylene wear in metal-on-polyethylene prosthetic bearing couples

(2017) A. Borjali et al.   WEAR

3D-printed navigation template in proximal femoral osteotomy for older children with developmental dysplasia of the hip

(2017) Pengfei Zheng et al.   Scientific Reports

Contemporary Surgical Indications and Referral Trends in Revision Total Hip Arthroplasty: A 10-Year Review

(2016) Jacob A. Haynes et al.   JOURNAL OF ARTHROPLASTY

Towards near-permanent CoCrMo prosthesis surface by combining micro-texturing and low temperature plasma carburising

(2016) Yangchun Dong et al.   Journal of the Mechanical Behavior of Biomedical Materials

Surface modification of Co–Cr–Mo implant alloy by laser interference lithography

(2016) Xiaofeng Wei et al.   TRIBOLOGY INTERNATIONAL

A numerical study of non-Newtonian transient elastohydrodynamic lubrication of metal-on-metal hip prostheses

(2016) Leiming Gao et al.   TRIBOLOGY INTERNATIONAL

A mixed lubrication model for studying tribological behaviors of surface texturing

(2016) Hui Zhang et al.   TRIBOLOGY INTERNATIONAL

Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings

(2016) Daniel Gropper et al.   TRIBOLOGY INTERNATIONAL

Development of low friction snake-inspired deterministic textured surfaces

(2016) P Cuervo et al.   Surface Topography-Metrology and Properties

The biological response to nanometre-sized polymer particles

(2015) Aiqin Liu et al.   Acta Biomaterialia

A tribological study of the petaloid surface texturing for Co–Cr–Mo alloy artificial joints

(2015) Hui Zhang et al.   APPLIED SURFACE SCIENCE

Improved friction and wear performance of micro dimpled ceramic-on-ceramic interface for hip joint arthroplasty

(2015) Taposh Roy et al.   CERAMICS INTERNATIONAL

Investigation of surgically retrieved, vitamin E-stabilized, crosslinked UHMWPE implants after short-termin vivoservice

(2015) Shannon L. Rowell et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

A novel tribological study on DLC-coated micro-dimpled orthopedics implant interface

(2015) Dipankar Choudhury et al.   Journal of the Mechanical Behavior of Biomedical Materials

Recent development on surface texturing in enhancing tribological performance of bearing sliders

(2015) T. Ibatan et al.   SURFACE & COATINGS TECHNOLOGY

Numerical optimization of texture shape for parallel surfaces under unidirectional and bidirectional sliding

(2015) Cong Shen et al.   TRIBOLOGY INTERNATIONAL

Surface Texturing of Vitamin E Blended UHMWPE for Reduction of Wear

(2014) B. Sagbas et al.   ACTA PHYSICA POLONICA A

Comparative Epidemiology of Revision Arthroplasty: Failed THA Poses Greater Clinical and Economic Burdens Than Failed TKA

(2014) Kevin J. Bozic et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

No Differences Found in Bearing Related Hip Survivorship at 10–12 Years Follow-Up Between Patients With Ceramic on Highly Cross-Linked Polyethylene Bearings Compared to Patients With Ceramic on Ceramic Bearings

(2014) Jean-Alain Epinette et al.   JOURNAL OF ARTHROPLASTY

Fabrication and characterization of DLC coated microdimples on hip prosthesis heads

(2014) Dipankar Choudhury et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Response of MC3T3-E1 osteoblast cells to the microenvironment produced on Co–Cr–Mo alloy using laser surface texturing

(2014) Liguo Qin et al.   JOURNAL OF MATERIALS SCIENCE

The load-carrying capacity and friction coefficient of incompressible textured parallel slider bearings with surface roughness inside the texture features

(2014) Mingfeng Qiu et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Tribological investigation of ultra-high molecular weight polyethylene against advanced ceramic surfaces in total hip joint replacement

(2014) Dipankar Choudhury et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Design principles for the area density of dimple patterns

(2014) Xiaolei Wang et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Effects of surface coating on reducing friction and wear of orthopaedic implants

(2014) Hee Ay Ching et al.   SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS

Designing prosthetic knee joints with bio-inspired bearing surfaces

(2014) Mingfeng Qiu et al.   TRIBOLOGY INTERNATIONAL

Optimization of Surface Texturing for Contact Between Steel and Ultrahigh Molecular Weight Polyethylene Under Boundary Lubrication

(2014) Minhaeng Cho et al.   TRIBOLOGY LETTERS

Lubrication Enhancement for UHMWPE Sliding Contacts through Surface Texturing

(2014) Patrick S. M. Dougherty et al.   TRIBOLOGY TRANSACTIONS

A patterned microtexture to reduce friction and increase longevity of prosthetic hip joints

(2014) Anthony Chyr et al.   WEAR

Fabrication and characterization of micro-dimple array on Al2O3 surfaces by using a micro-tooling

(2013) Taposh Roy et al.   CERAMICS INTERNATIONAL

Patterned CoCrMo and Al2O3surfaces for reduced free wear debris in artificial joint arthroplasty

(2013) Mohamad Tarabolsi et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Effects of surface texturing on the performance of biocompatible UHMWPE as a bearing material during in vitro lubricated sliding/rolling motion

(2013) Adrián López-Cervantes et al.   Journal of the Mechanical Behavior of Biomedical Materials

Comparison of the effects of surface texture on the surfaces of steel and UHMWPE

(2013) Bo Zhang et al.   TRIBOLOGY INTERNATIONAL

The accuracy of the compressible Reynolds equation for predicting the local pressure in gas-lubricated textured parallel slider bearings

(2013) Mingfeng Qiu et al.   TRIBOLOGY INTERNATIONAL

Effect of surface patterning on frictional heating of vitamin E blended UHMWPE

(2013) B. Sagbas et al.   WEAR

Modeling of surface texturing in hydrodynamic lubrication

(2013) Izhak Etsion   Friction

The changing demographics of total joint arthroplasty recipients in the United States and Ontario from 2001 to 2007

(2012) Bheeshma Ravi et al.   BEST PRACTICE & RESEARCH IN CLINICAL RHEUMATOLOGY

Comparison of Ten-Year Survivorship of Hip Prostheses with Use of Conventional Polyethylene, Metal-on-Metal, or Ceramic-on-Ceramic Bearings

(2012) Ingrid Milošev et al.   JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME

High incidence of pseudotumour formation after large-diameter metal-on-metal total hip replacement

(2012) B. H. Bosker et al.   JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME

Tantalum-based multilayer coating on cobalt alloys in total hip and knee replacement

(2012) C. Balagna et al.   Materials Science & Engineering C-Materials for Biological Applications

CoCrMo metal-on-metal hip replacements

(2012) Yifeng Liao et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Biomimetic surface design for ultrahigh molecular weight polyethylene to improve the tribological properties

(2012) Bo Zhang et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Does Vitamin E–Stabilized Ultrahigh-Molecular-Weight Polyethylene Address Concerns of Cross-Linked Polyethylene in Total Knee Arthroplasty?

(2011) Hani Haider et al.   JOURNAL OF ARTHROPLASTY

Lubrication of metal-on-metal hip joints: The effect of protein content and load on film formation and wear

(2011) C. Myant et al.   Journal of the Mechanical Behavior of Biomedical Materials

The influence of concave dimples on the metallic counterface on the wear of ultra-high molecular weight polyethylene

(2011) Xincong Zhou et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Use of vitamin E to protect cross-linked UHMWPE from oxidation

(2010) Reto Lerf et al.   BIOMATERIALS

Incidence and Factors Associated with Squeaking in Alumina-on-Alumina THA

(2010) Il-Yong Choi et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

The effect of aspherical geometry and surface texturing on the elastohydrodynamic lubrication of metal-on-metal hip prostheses under physiological loading and motions

(2010) L M Gao et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE

Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approach

(2010) M B Dobrica et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Effect of surface texturing on the elastohydrodynamic lubrication analysis of metal-on-metal hip implants

(2010) Leiming Gao et al.   TRIBOLOGY INTERNATIONAL

Hydrodynamic Lubrication of Microdimple Textured Surface Using Three-Dimensional CFD

(2010) Jing Han et al.   TRIBOLOGY TRANSACTIONS

Texturing of UHMWPE surface via NIL for low friction and wear properties

(2009) Tanu Suryadi Kustandi et al.   JOURNAL OF PHYSICS D-APPLIED PHYSICS

Study on long life of artificial joints by investigating optimal sliding surface geometry for improvement in wear resistance

(2009) Hiroshi Sawano et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Surface texturing by pulsed Nd:YAG laser

(2009) L.M. Vilhena et al.   TRIBOLOGY INTERNATIONAL

Characterization of a Highly Cross-linked Ultrahigh Molecular-Weight Polyethylene in Clinical Use in Total Hip Arthroplasty

(2008) Michel P. Laurent et al.   JOURNAL OF ARTHROPLASTY

Surface modification by electrical discharge machining: A review

(2008) Sanjeev Kumar et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY