On the Use of X-ray Computed Tomography in Assessment of 3D-Printed Components
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
On the Use of X-ray Computed Tomography in Assessment of 3D-Printed Components
Authors
Keywords
-
Journal
JOURNAL OF NONDESTRUCTIVE EVALUATION
Volume 39, Issue 4, Pages -
Publisher
Springer Science and Business Media LLC
Online
2020-09-29
DOI
10.1007/s10921-020-00721-1
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Applications of additive manufacturing in fabrication of sensors - A review
- (2020) Mohammad Reza Khosravani et al. SENSORS AND ACTUATORS A-PHYSICAL
- Defects identification using the improved ultrasonic measurement model and support vector machines
- (2020) Huifang Xiao et al. NDT & E INTERNATIONAL
- On the environmental impacts of 3D printing technology
- (2020) Mohammad Reza Khosravani et al. Applied Materials Today
- Occurrence of the potent mutagens 2- nitrobenzanthrone and 3-nitrobenzanthrone in fine airborne particles
- (2019) Aldenor G. Santos et al. Scientific Reports
- Multi-spectral near infrared NDE of polymer composites
- (2019) L. Senni et al. NDT & E INTERNATIONAL
- Laser ultrasonic inspection of additive manufactured components
- (2019) Geo Davis et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The effect of surface topography and porosity on the tensile fatigue of 3D printed Ti-6Al-4V fabricated by selective laser melting
- (2019) Cambre N. Kelly et al. Materials Science & Engineering C-Materials for Biological Applications
- Computed tomography based procedure for reproducible porosity measurement of additive manufactured samples
- (2019) Tomáš Zikmund et al. NDT & E INTERNATIONAL
- Geometrical metrology for metal additive manufacturing
- (2019) R.K. Leach et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Progression of X-ray computed tomography from medical imaging to current status in dimensional metrology
- (2019) Herminso Villarraga-Gómez et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Relationship between manufacturing defects and fatigue properties of additive manufactured austenitic stainless steel
- (2019) Thale R. Smith et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In-situ X-ray tomography analysis of the evolution of pores during deformation of AlSi10Mg fabricated by selective laser melting
- (2019) Javad Samei et al. MATERIALS LETTERS
- Multi-metal additive manufacturing process chain for optical quality mold generation
- (2019) F.G. Biondani et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 3-D X-ray computed tomography on failure characteristics of rock-like materials under coupled hydro-mechanical loading
- (2019) Miaomiao Kou et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Segmentation-free geometrical verification of additively manufactured components by x-ray computed tomography
- (2018) Giovanni Moroni et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Micro-mechanical analysis and X-ray computed tomography quantification of damage in concrete with industrial by-products and construction waste
- (2018) Savaş Erdem et al. JOURNAL OF CLEANER PRODUCTION
- Pore characterization of 3D-printed gypsum rocks: a comprehensive approach
- (2018) Lingyun Kong et al. JOURNAL OF MATERIALS SCIENCE
- In-situ interfacial quality assessment of Ultrasonic Additive Manufacturing components using ultrasonic NDE
- (2018) Venkata Karthik Nadimpalli et al. NDT & E INTERNATIONAL
- Uncertainty determination for X-ray computed tomography wear assessment of polyethylene hip joint prostheses
- (2018) Filippo Zanini et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Effects of magnification and sampling resolution in X-ray computed tomography for the measurement of additively manufactured metal surfaces
- (2018) Adam Thompson et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes
- (2018) Nicholas P. Calta et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- In situ monitoring of selective laser melting of zinc powder via infrared imaging of the process plume
- (2018) M. Grasso et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
- (2018) Chu Lun Alex Leung et al. Nature Communications
- 3-Dimensional inkjet printing of macro structures from silver nanoparticles
- (2018) Jayasheelan Vaithilingam et al. MATERIALS & DESIGN
- Characterisation Methods for Powder Bed Fusion Processed Surface Topography
- (2018) S. Lou et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Porosity Determination of Carbon and Glass Fibre Reinforced Polymers Using Phase-Contrast Imaging
- (2018) Christian Gusenbauer et al. JOURNAL OF NONDESTRUCTIVE EVALUATION
- New Approach for Verifying the Accuracy of X-ray Computed Tomography Measurements of Surface Topographies in Additively Manufactured Metal Parts
- (2018) Filippo Zanini et al. JOURNAL OF NONDESTRUCTIVE EVALUATION
- Looking deep into nature: A review of micro-computed tomography in biomimicry
- (2018) Anton du Plessis et al. Acta Biomaterialia
- Measurement of Taylor bubble shape in square channel by microfocus X-ray computed tomography for investigation of mass transfer
- (2017) Stephan Boden et al. FLOW MEASUREMENT AND INSTRUMENTATION
- System for CT-guided needle placement in the thorax and abdomen: A design for clinical acceptability, applicability and usability
- (2017) Maarten M. Arnolli et al. International Journal of Medical Robotics and Computer Assisted Surgery
- Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM)
- (2017) R. Rashid et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Areal surface texture data extraction from X-ray computed tomography reconstructions of metal additively manufactured parts
- (2017) A. Townsend et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components
- (2017) S. Tammas-Williams et al. Scientific Reports
- Staged thermomechanical testing of nickel superalloys produced by selective laser melting
- (2017) Zhengkai Xu et al. MATERIALS & DESIGN
- Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
- (2016) Saad A. Khairallah et al. ACTA MATERIALIA
- Non-destructive investigation of thermoplastic reinforced composites
- (2016) Ahmed Arabi Hassen et al. COMPOSITES PART B-ENGINEERING
- Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
- (2016) I. Maskery et al. MATERIALS CHARACTERIZATION
- Damage evolution and failure mechanisms in additively manufactured stainless steel
- (2016) Holly D. Carlton et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- X-ray computed tomography for additive manufacturing: a review
- (2016) A Thompson et al. MEASUREMENT SCIENCE and TECHNOLOGY
- The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting
- (2016) Samuel Tammas-Williams et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components
- (2016) S. Tammas-Williams et al. SCRIPTA MATERIALIA
- Advanced Micro-Lattice Materials
- (2015) Jian Xiong et al. ADVANCED ENGINEERING MATERIALS
- Measurement technologies for precision positioning
- (2015) W. Gao et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Nondestructive evaluation of forced delamination in glass fiber-reinforced composites by terahertz and ultrasonic waves
- (2015) Junliang Dong et al. COMPOSITES PART B-ENGINEERING
- Build Direction Effects on Microchannel Tolerance and Surface Roughness
- (2015) Jacob C. Snyder et al. JOURNAL OF MECHANICAL DESIGN
- Failure modes in high strength and stiffness to weight scaffolds produced by Selective Laser Melting
- (2015) Timothy B. Sercombe et al. MATERIALS & DESIGN
- XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting
- (2015) S. Tammas-Williams et al. MATERIALS CHARACTERIZATION
- Mechanical behavior of porous commercially pure Ti and Ti–TiB composite materials manufactured by selective laser melting
- (2015) H. Attar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Towards geometrical calibration of x-ray computed tomography systems—a review
- (2015) Massimiliano Ferrucci et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting
- (2015) Stefan Leuders et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Evaluation of dimensional accuracy and material properties of the MakerBot 3D desktop printer
- (2015) Garrett W. Melenka et al. RAPID PROTOTYPING JOURNAL
- Optimisation of process parameters for lattice structures
- (2015) Eberhard Abele et al. RAPID PROTOTYPING JOURNAL
- Computed tomography for characterization of fatigue performance of selective laser melted parts
- (2015) Shafaqat Siddique et al. MATERIALS & DESIGN
- Using a Combination of Micro--Computed Tomography, CAD and 3D Printing Techniques to Reconstruct Incomplete 19th-Century Cantonese Chess Pieces
- (2015) S. D. Laycock et al. ACM Journal on Computing and Cultural Heritage
- Spatial resolution characterization of a X-ray microCT system
- (2014) J. Rueckel et al. APPLIED RADIATION AND ISOTOPES
- Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology
- (2014) G. Ziółkowski et al. Archives of Civil and Mechanical Engineering
- Industrial applications of computed tomography
- (2014) L. De Chiffre et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Beam hardening correction for X-ray computed tomography of heterogeneous natural materials
- (2014) Richard A. Ketcham et al. COMPUTERS & GEOSCIENCES
- Evaluation of polychromatic X-ray radiography defect detection limits in a sample fabricated from Hastelloy X by selective laser melting
- (2014) Paul A. Rometsch et al. NDT & E INTERNATIONAL
- An investigation on the suitability of micro-computed tomography as a non-destructive technique to assess the morphology of laser sintered nylon 12 parts
- (2014) Davood Rouholamin et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Fabrication and Mechanical Characterisation of Titanium Lattices with Graded Porosity
- (2014) William van Grunsven et al. Metals
- Physico-chemical behaviour of Poly (Ether Ketone) (PEK) in High Temperature Laser Sintering (HT-LS)
- (2013) O.R. Ghita et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Quantitative Determination of Density and Mass of Polymeric Materials Using Microfocus Computed Tomography
- (2013) A. du Plessis et al. JOURNAL OF NONDESTRUCTIVE EVALUATION
- Study of EDM cutting of single crystal silicon carbide
- (2013) Yonghua Zhao et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Surface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V Structures
- (2013) Grzegorz Pyka et al. Materials
- The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds
- (2012) S. Van Bael et al. Acta Biomaterialia
- High-Resolution Microfocus X-Ray Computed Tomography for 3D Surface Roughness Measurements of Additive Manufactured Porous Materials
- (2012) Greet Kerckhofs et al. ADVANCED ENGINEERING MATERIALS
- Accuracy of industrial computed tomography measurements: Experimental results from an international comparison
- (2012) Simone Carmignato CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Microstructural origin of physical and mechanical properties of polyamide 12 processed by laser sintering
- (2012) Stéphane Dupin et al. EUROPEAN POLYMER JOURNAL
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Evaluations of cellular lattice structures manufactured using selective laser melting
- (2012) Chunze Yan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Selective laser melting-produced porous titanium scaffolds regenerate bone in critical size cortical bone defects
- (2012) Johan Van der Stok et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting
- (2011) A. Fukuda et al. Acta Biomaterialia
- Prediction of permeability of regular scaffolds for skeletal tissue engineering: A combined computational and experimental study
- (2011) S. Truscello et al. Acta Biomaterialia
- Computed tomography for dimensional metrology
- (2011) J.P. Kruth et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures
- (2011) S. Van Bael et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Modelling and simulation of structure surface generation using computer controlled ultra-precision polishing
- (2011) C.F. Cheung et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Comparison of density measurement techniques for additive manufactured metallic parts
- (2011) A.B. Spierings et al. RAPID PROTOTYPING JOURNAL
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started