The role of CaO in the steam gasification of plastic wastes recovered from the municipal solid waste in a fluidized bed reactor

The worldwide solid waste composition indicates that polymeric materials account for, approximately, 10 % of municipal solid waste (MSW). After sorting, MSW still contains a fraction of plastic (Municipal Plastic Waste - MPW) which is a potential raw material for thermochemical processes. Among the thermochemical processes, combustion, pyrolysis and gasification are the most important. This study reports the steam gasification process of the MPW after the MSW sorting of the selective collection in the municipality of Garibaldi, southern Brazil. The samples were obtained after the separation of materials intended for recycling. A total of 29.8 % of the MSW after sorting was found to be made of polymeric materials incorrectly sent to landfill. The MPW was characterized by gravimetric composition, particle size distribution, ultimate and proximate analyzes. The polymeric materials with the highest participation in MPW are polypropylene (28.77 %), polystyrene (23.53 %) and polyethylene (16.67 %). The gasification experiments were carried out in a fluidized bed reactor at different temperatures (800, 850 and 900 degrees C), by using steam as gasification agent (0.3 kg/h). Gasification experiments were also performed with calcium oxide (CaO). The remaining ash had its morphology analyzed by Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD), while gas from steam gasification was evaluated between 0-90 min by Gas Chromatography (GC). The steam gasification of MPW with CaO increased both dry gas yield and hydrogen yield. The maximum dry gas yield (3.12 Nm(3)/kg(MPW)) was obtained at 900 degrees C with CaO, as well as a high H-2 yield (104 mol/kg(MPW)). This energy reuse can help to reduce energy demand bottlenecks, as well as the decrease of landfills. (C) 2020 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.