Effects of Annealing Treatment on the Anisotropy Behavior of Cold-Rolled High-Manganese Austenite Stainless Steels

The Influence of Segregation of Mn on the Recrystallization Behavior of C-Mn Steels

(2019) C. Slater et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

Tensile and Microstructural Characteristics of Fe-24Mn Steel Welds for Cryogenic Applications

(2019) Myeonghwan Choi et al.   METALS AND MATERIALS INTERNATIONAL

The Effects of Recrystallization on Strength and Impact Toughness of Cold-Worked High-Mn Austenitic Steels

(2019) Minha Park et al.   Metals

Novel medium-Mn (austenite + martensite) duplex hot-rolled steel achieving 1.6 GPa strength with 20 % ductility by Mn-segregation-induced TRIP mechanism

(2018) Hyungsoo Lee et al.   ACTA MATERIALIA

Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys

(2018) Christian Haase et al.   ACTA MATERIALIA

Effect of isochronal annealing on the microstructure, texture and mechanical properties of a cold-rolled high manganese steel

(2018) Sudipta Pramanik et al.   MATERIALS CHARACTERIZATION

Improved microstructural homogeneity and mechanical property of medium manganese steel with Mn segregation banding by alternating lath matrix

(2018) Juhua Liang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Cold Rolling Process on Microstructure, Texture and Properties of Strip Cast Fe-2.6%Si Steel

(2018) Yunbo Xu et al.   Materials

Effect of cold rolling process on microstructure and mechanical properties of high strength β titanium alloy thin sheets

(2018) Yan Ma et al.   Progress in Natural Science-Materials International

Evidencing extrinsic stacking faults in twinning-induced plasticity steel

(2017) Gilberto Casillas et al.   MATERIALS CHARACTERIZATION

Effect of cryogenic deformation on microstructure and mechanical properties of 304 austenitic stainless steel

(2017) P. Mallick et al.   MATERIALS CHARACTERIZATION

A Multi-phase Field Model for Static Recrystallization of Hot Deformed Austenite in a C–Mn Steel

(2017) Jun Zhang et al.   Acta Metallurgica Sinica-English Letters

The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures

(2016) DongYue Li et al.   INTERMETALLICS

Effect of cold rolling on recrystallization and tensile behavior of a high-Mn steel

(2016) Z. Yanushkevich et al.   MATERIALS CHARACTERIZATION

Effect of grain refinement on hydrogen embrittlement behaviors of high-Mn TWIP steel

(2016) Y. Bai et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of reversion and recrystallization on microstructure and mechanical properties of Nb-alloyed low-Ni high-Mn austenitic stainless steels

(2016) A. Kisko et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Deformation Microstructure and Deformation-Induced Martensite in Austenitic Fe-Cr-Ni Alloys Depending on Stacking Fault Energy

(2016) Ye Tian et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Interrelation Between the Orientations of Deformation and Recrystallization in Hot Rolling of Anisotropic Electrical Steel

(2015) M. L. Lobanov et al.   METAL SCIENCE AND HEAT TREATMENT

Applying the texture analysis for optimizing thermomechanical treatment of high manganese twinning-induced plasticity steel

(2014) Christian Haase et al.   ACTA MATERIALIA

Interactions between ferrite recrystallization and austenite formation in high-strength steels

(2014) A. Chbihi et al.   JOURNAL OF MATERIALS SCIENCE

Influence of cold rolling on microstructure, texture and mechanical properties of low carbon high Mn TWIP steel

(2014) N.K. Tewary et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Thermodynamic calculation of stacking fault energy of the Fe–Mn–Si–C high manganese steels

(2014) Renlong Xiong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Comparison of static recrystallization behavior in hot rolled Mg–3Al–1Zn and Mg–3Zn–0.5Ca sheets

(2013) Jong-Youn Lee et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of stored energy on twin formation during primary recrystallization

(2013) W. Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microbanding mechanism in an Fe–Mn–C high-Mn twinning-induced plasticity steel

(2013) I. Gutierrez-Urrutia et al.   SCRIPTA MATERIALIA

Recrystallization kinetics and microstructure evolution during annealing of a cold-rolled Fe–Mn–C alloy

(2011) Yaping Lü et al.   ACTA MATERIALIA

High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships

(2011) O. Bouaziz et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate

(2010) S. Curtze et al.   ACTA MATERIALIA

Effects of annealing conditions on microstructure and mechanical properties of low carbon, manganese transformation-induced plasticity steel

(2010) Jae-Myeong Jang et al.   METALS AND MATERIALS INTERNATIONAL

Deformation-induced martensitic transformation behavior in cold-rolled and cold-drawn type 316 stainless steels

(2009) Nobuo Nakada et al.   ACTA MATERIALIA

Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure

(2008) R. Ueji et al.   SCRIPTA MATERIALIA

An alternative model for the strain hardening of FCC alloys that twin, validated for twinning-induced plasticity steel

(2008) J GILSEVILLANO   SCRIPTA MATERIALIA

Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels

(2007) O. Bouaziz et al.   SCRIPTA MATERIALIA