Characterization and performance analysis of 3D reconstruction of oil-lubricated Si3N4–GCr15/GCr15–GCr15 friction and wear surface

Learning to Estimate Surface Normal via Deep Photometric Stereo Networks

(2020) Tao Zhang et al.   OPTIK

A new method for the estimation of bearing health state and remaining useful life based on the moving average cross-correlation of power spectral density

(2020) Lang Xu et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Evaluation of thermal conductivity of deionized water containing SDS-coated NiO nanoparticles under the influences ofconstant and alternative varied magnetic fields

(2020) Zhixiong Chen et al.   POWDER TECHNOLOGY

Investigation of free convection heat transfer and entropy generation of nanofluid flow inside a cavity affected by magnetic field and thermal radiation

(2019) Ahmad Hajatzadeh Pordanjani et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Improve the thermal conductivity of 10w40-engine oil at various temperature by addition of Al2O3/Fe2O3 nanoparticles

(2019) Mohsen Tahmasebi Sulgani et al.   JOURNAL OF MOLECULAR LIQUIDS

Finite Elements based approaches for the modelling of radial crack formation upon Vickers indentation in silicon nitride ceramics

(2019) Yuri Kadin et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

A novel nonlinear regression model of SVR as a substitute for ANN to predict conductivity of MWCNT-CuO/water hybrid nanofluid based on empirical data

(2019) Arash Karimipour et al.   PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS

In-situ characterization of three dimensional worn surface under sliding-rolling contact

(2019) Chan Xu et al.   WEAR

A useful case study to develop lattice Boltzmann method performance: Gravity effects on slip velocity and temperature profiles of an air flow inside a microchannel under a constant heat flux boundary condition

(2019) Annunziata D'Orazio et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Self-repairing effect of few Si3N4 balls used as rolling elements to enhance the performance of bearings operating under contaminated lubrication conditions

(2019) N Muthunilavan et al.   TRIBOLOGY INTERNATIONAL

Online wear characterisation of rolling element bearing using wear particle morphological features

(2019) Yeping Peng et al.   WEAR

Incipient wear fault diagnosis using a modified change detection method

(2019) Yuankai Zhou et al.   TRIBOLOGY INTERNATIONAL

A Theoretical Model with the Effect of Cracks in the Local Spalling of Full Ceramic Ball Bearings

(2019) Huaitao Shi et al.   Applied Sciences-Basel

Applying artificial neural network and curve fitting method to predict the viscosity of SAE50/MWCNTs-TiO2 hybrid nanolubricant

(2019) Zhixiong Chen et al.   PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS

The impact of sonication and stirring durations on the thermal conductivity of alumina-liquid paraffin nanofluid: An experimental assessment

(2019) Zhixiong Chen et al.   POWDER TECHNOLOGY

Investigation of the tribological behavior of graphene oxide nanoplates as lubricant additives for ceramic/steel contact

(2018) Lupeng Wu et al.   TRIBOLOGY INTERNATIONAL

Factorial study of diesel engine oil contamination effects on steel and ceramic sliding contacts

(2018) P Ramkumar et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Increase lattice Boltzmann method ability to simulate slip flow regimes with dispersed CNTs nanoadditives inside

(2018) Masoud Mozaffari et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Three-dimensional reconstruction of wear particle surface based on photometric stereo

(2018) Shuo Wang et al.   MEASUREMENT

Investigation into the effects of slip boundary condition on nanofluid flow in a double-layer microchannel

(2017) Abedin Arabpour et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Effect on lubrication regimes with silicon nitride and bearing steel balls

(2017) Muthunilavan N. et al.   TRIBOLOGY INTERNATIONAL

Tribological Behavior of Babbitt Alloy Rubbing Against Si3N4 and Steel Under Dry Friction Condition

(2016) Xianbing Ji et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

A technique to measure surface asperities plastic deformation and wear in rolling contact

(2016) Nurul Farhana Mohd Yusof et al.   WEAR

Near Field Photometric Stereo with Point Light Sources

(2014) Roberto Mecca et al.   SIAM Journal on Imaging Sciences

Analysis of Surface Parameters and Vibration of Roller Bearing

(2014) Nurul Farhana Mohd Yusof et al.   TRIBOLOGY TRANSACTIONS

Topography changes observation during running-in of rolling contacts

(2014) F. Cabanettes et al.   WEAR

Plastic deformation of rough rolling contact: An experimental and numerical investigation

(2014) L. Berthe et al.   WEAR

A parameter prediction model of running-in based on surface topography

(2013) Gengpei Zhang et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Parametric Testing and Heat Generation Modeling of 133-mm Bore Ball Bearings: Part II—Results with Silicon Nitride Rolling Elements

(2011) Nelson H. Forster et al.   TRIBOLOGY TRANSACTIONS

Fatigue failure of all-steel and steel–silicon nitride rolling ball combinations

(2011) Mohsen Mosleh et al.   WEAR

Simulation of textured surface topography during a low wear process

(2010) Rafal Reizer et al.   TRIBOLOGY INTERNATIONAL

Surface roughness evolutions in sliding wear process

(2008) C.Q. Yuan et al.   WEAR