Mode I interlaminar fracture toughness of CFRP laminates reinforced with short aramid fibers

Synthetic fibers for cementitious composites: A critical and in-depth review of recent advances

(2019) Hamid Reza Pakravan et al.   CONSTRUCTION AND BUILDING MATERIALS

Structural assessment of bridge columns with engineered cementitious composites and Cu-Al-Mn superelastic alloys

(2019) Farshid Hosseini et al.   CONSTRUCTION AND BUILDING MATERIALS

Fracture and fatigue behaviour of carbon fibre composites with nanoparticle-sized fibres

(2019) Shang-Nan Tsai et al.   COMPOSITE STRUCTURES

Improving impact resistance and residual compressive strength of carbon fibre composites using un-bonded non-woven short aramid fibre veil

(2019) Bingyan Yuan et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

A novel method for multi-scale carbon fiber distribution characterization in cement-based composites

(2019) Zheng Tong et al.   CONSTRUCTION AND BUILDING MATERIALS

Fatigue retrofitting of cracked steel beams with CFRP laminates

(2018) Qian-Qian Yu et al.   COMPOSITE STRUCTURES

Improving the delamination resistance of carbon fiber/epoxy composites by brushing and abrading of the woven fabrics

(2018) Feng Xu et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical behavior of multilayer GO carbon-fiber cement composites

(2018) Zeng-shun Chen et al.   CONSTRUCTION AND BUILDING MATERIALS

Fractographic study of damage mechanisms in fiber reinforced polymer composites submitted to uniaxial compression

(2018) C.V. Opelt et al.   ENGINEERING FAILURE ANALYSIS

Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling

(2018) M.A. Caminero et al.   POLYMER TESTING

Performance of CFRP-steel joints enhanced with bi-directional CFRP fabric

(2018) Alaa Al-Mosawe et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of nanomaterial on mode I and mode II interlaminar fracture toughness of woven carbon fabric reinforced polymer composites

(2017) Vijay K. Srivastava et al.   ENGINEERING FRACTURE MECHANICS

Improvement of adhesive bonding of grit-blasted steel substrates by using diluted resin as a primer

(2017) Binhua Wang et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Comparative study of natural rubber and acrylonitrile rubber reinforced with aligned short aramid fiber

(2017) Pitchapa Pittayavinai et al.   POLYMER TESTING

Mode I and Mode II interlaminar fracture toughness of CFRP/magnesium alloys hybrid laminates

(2016) Yingcai Pan et al.   COMPOSITE INTERFACES

Toughened carbon fibre-reinforced polymer composites with nanoparticle-modified epoxy matrices

(2016) D. Carolan et al.   JOURNAL OF MATERIALS SCIENCE

Interlaminar mechanical properties of carbon fiber reinforced plastic laminates modified with graphene oxide interleaf

(2015) Huiming Ning et al.   CARBON

Effect of Fiber-Reinforced Polymer Wrapping on Concrete Chloride Penetration and Concrete Cover

(2014) Nur Yazdani et al.   TRANSPORTATION RESEARCH RECORD

Carbon-fiber aluminum-foam sandwich with short aramid-fiber interfacial toughening

(2012) Zhi Sun et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Mode II interfacial toughening through discontinuous interleaves for damage suppression and control

(2011) M. Yasaee et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Improving interlaminar fracture toughness of carbon fibre/epoxy laminates by incorporation of nano-particles

(2011) Ying Zeng et al.   COMPOSITES PART B-ENGINEERING

Experimental investigation of interfacial fracture behavior in foam core sandwich beams with visco-elastic adhesive interface

(2009) Wang Can et al.   COMPOSITE STRUCTURES