Additive manufacturing of biologically-inspired materials

Biologically Inspired Dynamic Material Systems

(2015) André R. Studart   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Voxel-based fabrication through material property mapping: A design method for bitmap printing

(2015) E.L. Doubrovski et al.   COMPUTER-AIDED DESIGN

Complex concrete structures

(2015) Ena Lloret et al.   COMPUTER-AIDED DESIGN

Structure of Gypsum and Polymer Molds for Slip Casting

(2015) Yu. N. Kryuchkov et al.   GLASS AND CERAMICS

Opening Pandora?s 3D Printed Box

(2015) Phillip Olla   IEEE TECHNOLOGY AND SOCIETY MAGAZINE

Analysis of the mechanical response of biomimetic materials with highly oriented microstructures through 3D printing, mechanical testing and modeling

(2015) Enrique Escobar de Obaldia et al.   Journal of the Mechanical Behavior of Biomedical Materials

The role of quasi-plasticity in the extreme contact damage tolerance of the stomatopod dactyl club

(2015) Shahrouz Amini et al.   NATURE MATERIALS

Magnetically assisted slip casting of bioinspired heterogeneous composites

(2015) Hortense Le Ferrand et al.   NATURE MATERIALS

Continuous liquid interface production of 3D objects

(2015) J. R. Tumbleston et al.   SCIENCE

A 3D-printed, functionally graded soft robot powered by combustion

(2015) N. W. Bartlett et al.   SCIENCE

Composition and structure of balsa (Ochroma pyramidale) wood

(2015) Marc Borrega et al.   WOOD SCIENCE AND TECHNOLOGY

Multimaterial magnetically assisted 3D printing of composite materials

(2015) Dimitri Kokkinis et al.   Nature Communications

Designing bioinspired composite reinforcement architectures via 3D magnetic printing

(2015) Joshua J. Martin et al.   Nature Communications

Inkjet Printed Conductive Tracks for Printed Electronics

(2015) S.- P. Chen et al.   ECS Journal of Solid State Science and Technology

The Geometric Design and Fabrication of Actuating Cellular Structures

(2015) Lorenzo Guiducci et al.   Advanced Materials Interfaces

Additive Manufacturing of Optically Transparent Glass

(2015) John Klein et al.   3D Printing and Additive Manufacturing

Bio-inspired impact-resistant composites

(2014) L.K. Grunenfelder et al.   Acta Biomaterialia

3D-Printing of Lightweight Cellular Composites

(2014) Brett G. Compton et al.   ADVANCED MATERIALS

Biomimetic shark skin: design, fabrication and hydrodynamic function

(2014) L. Wen et al.   JOURNAL OF EXPERIMENTAL BIOLOGY

Bioinspired structural materials

(2014) Ulrike G. K. Wegst et al.   NATURE MATERIALS

Modeling and additive manufacturing of bio-inspired composites with tunable fracture mechanical properties

(2014) Leon S. Dimas et al.   Soft Matter

Textured fluorapatite bonded to calcium sulphate strengthen stomatopod raptorial appendages

(2014) Shahrouz Amini et al.   Nature Communications

Overcoming the brittleness of glass through bio-inspiration and micro-architecture

(2014) M. Mirkhalaf et al.   Nature Communications

Multifunctional microparticles with uniform magnetic coatings and tunable surface chemistry

(2014) Tobias P. Niebel et al.   RSC Advances

Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing

(2013) Leon S. Dimas et al.   ADVANCED FUNCTIONAL MATERIALS

Biological and Bioinspired Composites with Spatially Tunable Heterogeneous Architectures

(2013) André R. Studart   ADVANCED FUNCTIONAL MATERIALS

A Tissue-Like Printed Material

(2013) G. Villar et al.   SCIENCE

Structural Biological Materials: Critical Mechanics-Materials Connections

(2013) M. A. Meyers et al.   SCIENCE

Injectable Materials with Magnetically Controlled Anisotropic Porosity

(2012) Marianne R. Sommer et al.   ACS Applied Materials & Interfaces

Reinforcement of Stereolithographic Resins for Rapid Prototyping with Cellulose Nanocrystals

(2012) Sandeep Kumar et al.   ACS Applied Materials & Interfaces

Natural Flexible Dermal Armor

(2012) Wen Yang et al.   ADVANCED MATERIALS

Towards High-Performance Bioinspired Composites

(2012) André R. Studart   ADVANCED MATERIALS

The Stomatopod Dactyl Club: A Formidable Damage-Tolerant Biological Hammer

(2012) J. C. Weaver et al.   SCIENCE

Composites Reinforced in Three Dimensions by Using Low Magnetic Fields

(2012) R. M. Erb et al.   SCIENCE

Non-linear alignment dynamics in suspensions of platelets under rotating magnetic fields

(2012) Randall M. Erb et al.   Soft Matter

Temporal response of magnetically labeled platelets under dynamic magnetic fields

(2012) Randall M. Erb et al.   Soft Matter

Bioinspired Strong and Highly Porous Glass Scaffolds

(2011) Qiang Fu et al.   ADVANCED FUNCTIONAL MATERIALS

The conflicts between strength and toughness

(2011) Robert O. Ritchie   NATURE MATERIALS

Tablet-level origin of toughening in abalone shells and translation to synthetic composite materials

(2011) Horacio D. Espinosa et al.   Nature Communications

Biological Composites

(2010) John W.C. Dunlop et al.   Annual Review of Materials Research

Mechanical behavior of bio-inspired laminated composites

(2010) Liang Cheng et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Designing colloidal suspensions for directed materials assembly

(2010) Jacinta C. Conrad et al.   CURRENT OPINION IN COLLOID & INTERFACE SCIENCE

Micro-architectured materials: past, present and future

(2010) N. A. Fleck et al.   PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

Influence of Structural Principles on the Mechanics of a Biological Fiber-Based Composite Material with Hierarchical Organization: The Exoskeleton of the LobsterHomarus americanus

(2009) Helge-Otto Fabritius et al.   ADVANCED MATERIALS

Plants control the properties and actuation of their organs through the orientation of cellulose fibrils in their cell walls

(2009) I. Burgert et al.   INTEGRATIVE AND COMPARATIVE BIOLOGY

Merger of structure and material in nacre and bone – Perspectives on de novo biomimetic materials

(2009) Horacio D. Espinosa et al.   PROGRESS IN MATERIALS SCIENCE

The Molecular Basis of Nacre Formation

(2009) N. Kroger   SCIENCE

Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes

(2009) B. Y. Ahn et al.   SCIENCE

3D restitution, restoration and prototyping of a medieval damaged skull

(2008) Massimiliano Fantini et al.   RAPID PROTOTYPING JOURNAL

Biological materials: Structure and mechanical properties

(2007) Marc André Meyers et al.   PROGRESS IN MATERIALS SCIENCE