Transparent poly(lactic acid) film crystallized by annealing beyond glass transition temperature

Reduction of cycle times in injection molding of PLA through bio-based nucleating agents

(2019) Hendrik Schäfer et al.   EUROPEAN POLYMER JOURNAL

Improvement of mechanical toughness of poly(lactic acid) by addition of ethylene-vinyl acetate copolymer

(2019) Daisuke Kugimoto et al.   POLYMER TESTING

The crystallization behavior of poly(lactic acid) with different types of nucleating agents

(2018) Yongqi Feng et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Modifying the thermal and mechanical properties of poly(lactic acid) by adding lithium trifluoromethanesulfonate

(2018) Shota Tomie et al.   JOURNAL OF POLYMER RESEARCH

Enhancement of drawdown force in polypropylene containing nucleating agent

(2018) Panitha Phulkerd et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Effect of nucleating agents on crystallinity and properties of poly (lactic acid) (PLA)

(2017) Laura Aliotta et al.   EUROPEAN POLYMER JOURNAL

Effect of cooling conditions on the mechanical properties of crystalline poly(lactic acid)

(2017) Tong Huang et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Chain Packing and Its Anomalous Effect on Mechanical Toughness for Poly(lactic acid)

(2015) Tong Huang et al.   BIOMACROMOLECULES

Favorable formation of stereocomplex crystals in poly( l -lactide)/poly( d -lactide) blends by selective nucleation

(2015) Zujiang Xiong et al.   POLYMER

Influence of chain extender on mechanical, thermal and morphological properties of blown films of PLA/PBAT blends

(2015) Liliane Cardoso Arruda et al.   POLYMER TESTING

Effect of Die Geometry on Drawdown Force of Polypropylene at Capillary Extrusion

(2014) JIRAPORN SEEMORK et al.   ADVANCES IN POLYMER TECHNOLOGY

Crystallization Behavior and Dynamic Mechanical Properties of Poly(l-Lactic Acid) with Poly(Ethylene Glycol) Terminated by Benzoate

(2014) Tong Huang et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

Effect of Flexible Fibers on Rheological Properties of Poly(Lactic Acid) Composites under Elongational Flow

(2013) Masayuki Yamaguchi et al.   NIHON REOROJI GAKKAISHI

The crystallization behavior and mechanical properties of polylactic acid in the presence of a crystal nucleating agent

(2012) Zhaobin Tang et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Low-molecular weight aliphatic amides as nucleating agents for poly (L-lactic acid): Conformation variation induced crystallization enhancement

(2012) Qian Xing et al.   POLYMER

Poly(lactic acid) crystallization

(2012) Sajjad Saeidlou et al.   PROGRESS IN POLYMER SCIENCE

Preparation and characterization of biodegradable polylactide/thermoplastic polyurethane elastomer blends

(2011) Juan-Juan Han et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Rheological properties of polymer composites with flexible fine fibers

(2011) Tadashi Yokohara et al.   JOURNAL OF RHEOLOGY

Sorbitol–POSS Interactions on Development of Isotactic Polypropylene Composites

(2011) Sayantan Roy et al.   MACROMOLECULES

Miscibility, mechanical and thermal properties of poly(lactic acid)/polyester-diol blends

(2009) Kenzo Okamoto et al.   EUROPEAN POLYMER JOURNAL

Structure and properties for biomass-based polyester blends of PLA and PBS

(2008) Tadashi Yokohara et al.   EUROPEAN POLYMER JOURNAL

Improvement in toughness of poly(l-lactide) (PLLA) through reactive blending with acrylonitrile–butadiene–styrene copolymer (ABS): Morphology and properties

(2008) Yongjin Li et al.   EUROPEAN POLYMER JOURNAL

Preparation and properties of biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) blend with glycidyl methacrylate as reactive processing agent

(2008) Naiwen Zhang et al.   JOURNAL OF MATERIALS SCIENCE

Flow Induced Crystallization in Isotactic Polypropylene−1,3:2,4-Bis(3,4-dimethylbenzylidene)sorbitol Blends:  Implications on Morphology of Shear and Phase Separation

(2007) Luigi Balzano et al.   MACROMOLECULES