Bridging R2R Printed Wireless 1 Bit‐Code Generator with an Electrophoretic QR Code Acting as WORM for NFC Carrier Enabled Authentication Label
Published 2019 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Bridging R2R Printed Wireless 1 Bit‐Code Generator with an Electrophoretic QR Code Acting as WORM for NFC Carrier Enabled Authentication Label
Authors
Keywords
-
Journal
Advanced Materials Technologies
Volume 5, Issue 2, Pages 1900935
Publisher
Wiley
Online
2019-12-20
DOI
10.1002/admt.201900935
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- An Electroactive Binder in the Formulation of IGZO Ink to Print an IGZO-Based Rectifier for Harvesting Direct Current (DC) Power from the Near Field Communication (NFC) Signal of a Smartphone
- (2018) Grishmi Rajbhandari et al. Advanced Electronic Materials
- Flexible active-matrix organic light-emitting diode display enabled by MoS2thin-film transistor
- (2018) Minwoo Choi et al. Science Advances
- Inorganic nanomaterials for printed electronics: a review
- (2017) Wei Wu Nanoscale
- Highly stretchable polymer semiconductor films through the nanoconfinement effect
- (2017) Jie Xu et al. SCIENCE
- Painting Integrated Complementary Logic Circuits for Single-Crystal Organic Transistors: A Demonstration of a Digital Wireless Communication Sensing Tag
- (2017) Akifumi Yamamura et al. Advanced Electronic Materials
- Fully Printed and Encapsulated SWCNT-Based Thin Film Transistors via a Combination of R2R Gravure and Inkjet Printing
- (2016) Christa M. Homenick et al. ACS Applied Materials & Interfaces
- Fully gravure printed complementary carbon nanotube TFTs for a clock signal generator using an epoxy-imine based cross-linker as an n-dopant and encapsulant
- (2016) Donghwan Kim et al. Nanoscale
- Fabrication of Ultra-Thin Printed Organic TFT CMOS Logic Circuits Optimized for Low-Voltage Wearable Sensor Applications
- (2016) Yasunori Takeda et al. Scientific Reports
- Wireless Hydrogen Smart Sensor Based on Pt/Graphene-Immobilized Radio-Frequency Identification Tag
- (2015) Jun Seop Lee et al. ACS Nano
- An Integrated 13.56-MHz RFID Tag in a Printed Organic Complementary TFT Technology on Flexible Substrate
- (2015) Vincenzo Fiore et al. IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS
- Key Issues With Printed Flexible Thin Film Transistors and Their Application in Disposable RF Sensors
- (2015) Jinsoo Noh et al. PROCEEDINGS OF THE IEEE
- Scalability of carbon-nanotube-based thin film transistors for flexible electronic devices manufactured using an all roll-to-roll gravure printing system
- (2015) Hyunmo Koo et al. Scientific Reports
- Fully printed flexible and disposable wireless cyclic voltammetry tag
- (2015) Younsu Jung et al. Scientific Reports
- A fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors
- (2015) Wookyu Lee et al. Scientific Reports
- High-Speed, Inkjet-Printed Carbon Nanotube/Zinc Tin Oxide Hybrid Complementary Ring Oscillators
- (2014) Bongjun Kim et al. NANO LETTERS
- Fully-printed high-performance organic thin-film transistors and circuitry on one-micron-thick polymer films
- (2014) Kenjiro Fukuda et al. Nature Communications
- Large-scale complementary macroelectronics using hybrid integration of carbon nanotubes and IGZO thin-film transistors
- (2014) Haitian Chen et al. Nature Communications
- Extremely flexible, printable Ag conductive features on PET and paper substrates via continuous millisecond photonic sintering in a large area
- (2014) Yejin Jo et al. Journal of Materials Chemistry C
- Fully Printed, High Performance Carbon Nanotube Thin-Film Transistors on Flexible Substrates
- (2013) Pak Heng Lau et al. NANO LETTERS
- Fully roll-to-roll gravure printed rectenna on plastic foils for wireless power transmission at 13.56 MHz
- (2012) Hyejin Park et al. NANOTECHNOLOGY
- Flexible and low-voltage integrated circuits constructed from high-performance nanocrystal transistors
- (2012) David K. Kim et al. Nature Communications
- A stable solution-processed polymer semiconductor with record high-mobility for printed transistors
- (2012) Jun Li et al. Scientific Reports
- Charge-Carrier Balance and Color Purity in Polyfluorene Polymer Blends for Blue Light-Emitting Diodes
- (2011) Li-Ping Lu et al. ADVANCED FUNCTIONAL MATERIALS
- All-Printed and Roll-to-Roll-Printable 13.56-MHz-Operated 1-bit RF Tag on Plastic Foils
- (2010) Minhun Jung et al. IEEE TRANSACTIONS ON ELECTRON DEVICES
- Printable electronics: flexibility for the future
- (2009) Mark A. M. Leenen et al. PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE
- Organic field effect transistors from ambient solution processed low molar mass semiconductor–insulator blends
- (2008) Marie-Beatrice Madec et al. JOURNAL OF MATERIALS CHEMISTRY
- Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic
- (2008) Jeong Ho Cho et al. NATURE MATERIALS
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started