Material Reuse in Laser Powder Bed Fusion: Side Effects of the Laser—Metal Powder Interaction

Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization

(2019) Laura Cordova et al.   JOM

Localized Changes of Stainless Steel Powder Characteristics During Selective Laser Melting Additive Manufacturing

(2019) D. Galicki et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Identification and characterization of spatter particles and their effect on surface roughness, density and mechanical response of 17-4 PH stainless steel laser powder-bed fusion parts

(2019) Usman Ali et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Comparison of a commercial powder and a powder produced from Ti-6Al-4V chips and their effects on compacts sintered by the sinter-HIP method

(2019) Mustafa Ustundag et al.   International Journal of Minerals Metallurgy and Materials

Synthesis of Nb-based powder alloy by mechanical alloying and plasma spheroidization processes for additive manufacturing

(2019) I.S. Goncharov et al.   MATERIALS LETTERS

High-power laser-matter interaction during laser powder bed fusion

(2019) Jie Yin et al.   Additive Manufacturing

Effect of Surface and Subsurface Defects on Fatigue Behavior of AlSi10Mg Alloy Processed by Laser Powder Bed Fusion (L-PBF)

(2019) Milad Hamidi Nasab et al.   Metals

In-situ characterization and quantification of melt pool variation under constant input energy density in laser powder bed fusion additive manufacturing process

(2019) Qilin Guo et al.   Additive Manufacturing

Functionally graded and multi-morphology sheet TPMS lattices: Design, manufacturing, and mechanical properties

(2019) Oraib Al-Ketan et al.   Journal of the Mechanical Behavior of Biomedical Materials

Melt pool controlled laser powder bed fusion for customised low-density lattice structures

(2019) Alexander Großmann et al.   MATERIALS & DESIGN

Characterization of laser spatter and condensate generated during the selective laser melting of 304L stainless steel powder

(2019) Austin T. Sutton et al.   Additive Manufacturing

Correlation between forming quality and spatter dynamics in laser powder bed fusion

(2019) Jie Yin et al.   Additive Manufacturing

Particle shape and size analysis for metal powders used for additive manufacturing: Technique description and application to two gas-atomized and plasma-atomized Ti64 powders

(2019) E.J. Garboczi et al.   Additive Manufacturing

Influence of keyhole and conduction mode melting for top-hat shaped beam profiles in laser powder bed fusion

(2019) Christian Tenbrock et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Argon-helium mixtures as Laser-Powder Bed Fusion atmospheres: Towards increased build rate of Ti-6Al-4V

(2019) Camille Pauzon et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Study of powder recycling and its effect on printed parts during laser powder-bed fusion of 17-4 PH stainless steel

(2019) Farid Ahmed et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

(2018) Tuan D. Ngo et al.   COMPOSITES PART B-ENGINEERING

Feedstock powder processing research needs for additive manufacturing development

(2018) Iver E. Anderson et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Statistical approach for assessing the effect of powder reuse on the final quality of AlSi10Mg parts produced by laser powder bed fusion additive manufacturing

(2018) F. Del Re et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Effects of Reusing Ti-6Al-4V Powder in a Selective Laser Melting Additive System Operated in an Industrial Setting

(2018) Oscar A. Quintana et al.   JOM

Single scan track analyses on aluminium based powders

(2018) Alberta Aversa et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Investigation into the influence of laser energy input on selective laser melted thin-walled parts by response surface method

(2018) Yang Liu et al.   OPTICS AND LASERS IN ENGINEERING

Comparison of characterization methods for differently atomized nickel-based alloy 625 powders

(2018) Amir Mostafaei et al.   POWDER TECHNOLOGY

A comparative study of Ti-6Al-4V powders for additive manufacturing by gas atomization, plasma rotating electrode process and plasma atomization

(2018) G. Chen et al.   POWDER TECHNOLOGY

Additive manufacturing of metallic components – Process, structure and properties

(2018) T. DebRoy et al.   PROGRESS IN MATERIALS SCIENCE

Preventing damage and redeposition during focused ion beam milling: The “umbrella” method

(2018) T. Vermeij et al.   ULTRAMICROSCOPY

Characterization of 17-4PH Single Tracks Produced at Different Parametric Conditions towards Increased Productivity of LPBF Systems—The Effect of Laser Power and Spot Size Upscaling

(2018) Nkutwane Makoana et al.   Metals

In situ monitoring of selective laser melting using plume and spatter signatures by deep belief networks

(2018) Dongsen Ye et al.   ISA TRANSACTIONS

Ti6Al4V lightweight lattice structures manufactured by laser powder bed fusion for load-bearing applications

(2018) Anton du Plessis et al.   OPTICS AND LASER TECHNOLOGY

Powder Recycling Effects on the Tensile and Fatigue Behavior of Additively Manufactured Ti-6Al-4V Parts

(2018) Patricio E. Carrion et al.   JOM

Effects of scan speed on vapor plume behavior and spatter generation in laser powder bed fusion additive manufacturing

(2018) Hang Zheng et al.   Journal of Manufacturing Processes

On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing

(2018) Reza Esmaeilizadeh et al.   Journal of Manufacturing Processes

Scaling laws for the laser welding process in keyhole mode

(2018) Remy Fabbro   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Looking deep into nature: A review of micro-computed tomography in biomimicry

(2018) Anton du Plessis et al.   Acta Biomaterialia

Gaussian process-based surrogate modeling framework for process planning in laser powder-bed fusion additive manufacturing of 316L stainless steel

(2017) Gustavo Tapia et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Laser powder bed fusion of nickel alloy 625: Experimental investigations of effects of process parameters on melt pool size and shape with spatter analysis

(2017) Luis E. Criales et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Strategy for Texture Management in Metals Additive Manufacturing

(2017) M. M. Kirka et al.   JOM

Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V

(2017) Ross Cunningham et al.   JOM

Analysis of laser–melt pool–powder bed interaction during the selective laser melting of a stainless steel

(2017) Valérie Gunenthiram et al.   JOURNAL OF LASER APPLICATIONS

On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder

(2017) Hamed Asgari et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Spheroidization by Plasma Processing and Characterization of Stainless Steel Powder for 3D Printing

(2017) Lina Ji et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties

(2017) Di Wang et al.   MATERIALS & DESIGN

Characteristics of 7055Al alloy powders manufactured by gas-solid two-phase atomization: A comparison with gas atomization process

(2017) Chaorun Si et al.   MATERIALS & DESIGN

In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing

(2017) Umberto Scipioni Bertoli et al.   MATERIALS & DESIGN

Spatter formation in selective laser melting process using multi-laser technology

(2017) Mohsen Taheri Andani et al.   MATERIALS & DESIGN

Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing

(2017) Sonny Ly et al.   Scientific Reports

Denudation of metal powder layers in laser powder bed fusion processes

(2016) Manyalibo J. Matthews et al.   ACTA MATERIALIA

Additive manufacturing of metals

(2016) Dirk Herzog et al.   ACTA MATERIALIA

Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones

(2016) Saad A. Khairallah et al.   ACTA MATERIALIA

Multiscale Modeling of Powder Bed–Based Additive Manufacturing

(2016) Matthias Markl et al.   Annual Review of Materials Research

The metallurgy and processing science of metal additive manufacturing

(2016) W. J. Sames et al.   INTERNATIONAL MATERIALS REVIEWS

Overview of Materials Qualification Needs for Metal Additive Manufacturing

(2016) Mohsen Seifi et al.   JOM

Effect of real-time cooling rate on microstructure in Laser Additive Manufacturing

(2016) Mohammad H. Farshidianfar et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Femtosecond laser additive manufacturing of iron and tungsten parts

(2015) Bai Nie et al.   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock

(2015) Allison M. Beese et al.   JOM

Characterization and Control of Powder Properties for Additive Manufacturing

(2015) A. Strondl et al.   JOM

A novel method for the production of metal powders without conventional atomization process

(2015) A. Canakci et al.   JOURNAL OF CLEANER PRODUCTION

Viewpoint: metallurgical aspects of powder bed metal additive manufacturing

(2015) Rainer J. Hebert   JOURNAL OF MATERIALS SCIENCE

A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V

(2015) Marco Simonelli et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges

(2015) W. E. King et al.   Applied Physics Reviews

Introduction to the Additive Manufacturing Powder Metallurgy Supply Chain

(2015) Jason Dawes et al.   Johnson Matthey Technology Review

Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder

(2015) Yang Liu et al.   MATERIALS & DESIGN

The influence of heat accumulation on the surface roughness in powder-bed additive manufacturing

(2015) Mahdi Jamshidinia et al.   Surface Topography-Metrology and Properties

Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting

(2014) J. A. Cherry et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Metal Additive Manufacturing: A Review

(2014) William E. Frazier   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing

(2014) Wayne E. King et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V

(2014) M. Simonelli et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Characterization of Metal Powders Used for Additive Manufacturing

(2014) J. A. Slotwinski et al.   JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY

Observation of spatter formation mechanisms in high-power fiber laser welding of thick plate

(2013) M.J. Zhang et al.   APPLIED SURFACE SCIENCE

The effect of type of atmospheric gas on milling behavior of nanostructured Ti6Al4V alloy

(2012) Amir Mahboubi Soufiani et al.   ADVANCED POWDER TECHNOLOGY

Multifunctional heat exchangers derived from three-dimensional micro-lattice structures

(2012) Kevin J. Maloney et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Laser additive manufacturing of metallic components: materials, processes and mechanisms

(2012) D D Gu et al.   INTERNATIONAL MATERIALS REVIEWS

Vapor–plasma plume investigation during high-power fiber laser welding

(2012) P Yu Shcheglov et al.   LASER PHYSICS

Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks

(2012) Igor Yadroitsev et al.   RAPID PROTOTYPING JOURNAL

Gas flow effects on selective laser melting (SLM) manufacturing performance

(2011) B. Ferrar et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Plume attenuation of laser radiation during high power fiber laser welding

(2011) P.Yu. Shcheglov et al.   LASER PHYSICS LETTERS

Single track formation in selective laser melting of metal powders

(2010) I. Yadroitsev et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Melt pool and keyhole behaviour analysis for deep penetration laser welding

(2010) R Fabbro   JOURNAL OF PHYSICS D-APPLIED PHYSICS

Nucleation-induced kinetic hindrance to the oxide formation during the initial oxidation of metals

(2010) Guangwen Zhou   PHYSICAL REVIEW B

High quality welding of stainless steel with 10 kW high power fibre laser

(2009) Y. Kawahito et al.   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

High density selective laser melting of Waspaloy®

(2007) Kamran Aamir Mumtaz et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Study on microstructure and mechanical properties of laser rapid forming Inconel 718

(2007) Xiaoming Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING