Continuous Adsorption Modeling and Fixed Bed Column Studies: Adsorption of Tannery Wastewater Pollutants Using Beach Sand

Pineapple Bark Performance in Dyes Adsorption: Optimization by the Central Composite Design

(2019) Ahlam Fegousse et al.   Journal of Chemistry

Distribution and characterization of microplastics in beach sand from three different Indian coastal environments

(2019) M. Tiwari et al.   MARINE POLLUTION BULLETIN

Adsorption of textile wastewater on alkali-activated sand

(2019) Aditya Sharma et al.   JOURNAL OF CLEANER PRODUCTION

Microbiological and Physicochemical Characterization of Hospital Effluents before and after Treatment with Two Types of Sawdust

(2019) Rabea Elmountassir et al.   Journal of Chemistry

Investigation of pilot-scale constructed wetlands treating simulated pre-treated tannery wastewater under tropical climate

(2019) Susana Ramírez et al.   CHEMOSPHERE

Magnetic palm kernel biochar potential route for phenol removal from wastewater

(2019) Muhammad Nazmi Hairuddin et al.   ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH

Process optimization and modeling of lead removal using iron oxide nanocomposites generated from bio-waste mass

(2019) Lakshmi Prasanna Lingamdinne et al.   CHEMOSPHERE

Improving efficacy of Cr (VI) adsorption process on sustainable adsorbent derived from waste biomass (sugarcane bagasse) with help of ant colony optimization

(2019) Rama Rao Karri et al.   INDUSTRIAL CROPS AND PRODUCTS

Superhydrophobic coating on quartz sand filter media for oily wastewater filtration

(2018) Jianlin Liu et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Modeling and optimization by particle swarm embedded neural network for adsorption of zinc (II) by palm kernel shell based activated carbon from aqueous environment

(2018) Rama Rao Karri et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

The adsorption behavior of hydroxypropyl guar gum onto quartz sand

(2018) Zichen Yin et al.   JOURNAL OF MOLECULAR LIQUIDS

Amino functionalized ATRP-prepared polyacrylamide -g- magnetite nanoparticles for the effective removal of Cu(II) ions: Kinetics investigations

(2018) Masoumeh Mirzaeinejad et al.   MATERIALS CHEMISTRY AND PHYSICS

Risques professionnels liés à la manipulation du chrome au sein des tanneries modernes de la ville de Fès, Maroc

(2018) Y. Metarfi et al.   REVUE D EPIDEMIOLOGIE ET DE SANTE PUBLIQUE

Effect of filler type and content on mechanical properties and microstructure of sand concrete made with superfine waste sand

(2018) Chaohua Jiang et al.   CONSTRUCTION AND BUILDING MATERIALS

Ultrasonic spray pyrolysis synthesis of nitrogen-doped porous Fe/C composites from glycerol for hexavalent chromium removal

(2018) Yanbin Cui et al.   MATERIALS CHEMISTRY AND PHYSICS

Stabilizing of poly(amidoamine) dendrimer on the surface of sand for the removal of nonylphenol from water: Batch and column studies

(2018) Vahid Khatibikamal et al.   JOURNAL OF HAZARDOUS MATERIALS

Diagnosis of the heating effect on the electrical resistivity of Ouargla (Algeria) dunes sand using XRD patterns and FTIR spectra

(2017) Mohammed Laïd Mechri et al.   JOURNAL OF AFRICAN EARTH SCIENCES

Modelling of fluidised-bed reactor by differential evolution optimization for phenol removal using coconut shells based activated carbon

(2017) Rama Rao Karri et al.   JOURNAL OF MOLECULAR LIQUIDS

Adsorptive behavior of rice bran-based composites for malachite green dye: Isotherm, kinetic and thermodynamic studies

(2017) Haq Nawaz Bhatti et al.   JOURNAL OF MOLECULAR LIQUIDS

Macro-porous ceramic supports for membranes prepared from quartz sand and calcite mixtures

(2017) Nabila Kouras et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Optimal isotherm parameters for phenol adsorption from aqueous solutions onto coconut shell based activated carbon: Error analysis of linear and non-linear methods

(2017) Rama Rao Karri et al.   Journal of the Taiwan Institute of Chemical Engineers

Treatment of highly concentrated tannery wastewater using electrocoagulation: Influence of the quality of aluminium used for the electrode

(2016) S. Elabbas et al.   JOURNAL OF HAZARDOUS MATERIALS

Competitive Fixed-Bed Adsorption of Pb(II), Cu(II), and Ni(II) from Aqueous Solution Using Chitosan-Coated Bentonite

(2016) Wan-Chi Tsai et al.   International Journal of Polymer Science

Study of Heat Effect on the Composition of Dunes Sand of Ouargla (Algeria) Using XRD and FTIR

(2016) Mohammed Laïd Mechri et al.   Silicon

Modeling of competitive ultrasonic assisted removal of the dyes – Methylene blue and Safranin-O using Fe3O4 nanoparticles

(2015) M. Ghaedi et al.   CHEMICAL ENGINEERING JOURNAL

Pyrolysis behavior of Indonesia oil sand by TG-FTIR and in a fixed bed reactor

(2015) Chunxia Jia et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Continuous Fixed-Bed Column Study and Adsorption Modeling: Removal of Lead Ion from Aqueous Solution by Charcoal Originated from Chemical Carbonization of Rubber Wood Sawdust

(2015) Swarup Biswas et al.   Journal of Chemistry

Dye and its removal from aqueous solution by adsorption: A review

(2014) Mustafa T. Yagub et al.   ADVANCES IN COLLOID AND INTERFACE SCIENCE

Continuous fixed-bed column study and adsorption modeling: Removal of cadmium (II) and lead (II) ions in aqueous solution by dead calcareous skeletons

(2014) Ai Phing Lim et al.   BIOCHEMICAL ENGINEERING JOURNAL

Water quality assessment of highly polluted rivers in a semi-arid Mediterranean zone Oued Fez and Sebou River (Morocco)

(2013) J.L. Perrin et al.   JOURNAL OF HYDROLOGY

A combined study by XRD, FTIR, TG and HRTEM on the structure of delaminated Fe-intercalated/pillared clay

(2008) Peng Yuan et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE