Damage Identification in Structural Health Monitoring: A Brief Review from its Implementation to the Use of Data-Driven Applications

New Signal Processing Approach for Structural Health Monitoring in Noisy Environments Based on Impedance Measurements

(2019) Bruno Albuquerque de Castro et al.   MEASUREMENT

Performance evaluation of smart grid fabrics comprising carbon dry fabrics and PVDF ribbon sensors for structural health monitoring

(2019) Kyung-Chae Jung et al.   COMPOSITES PART B-ENGINEERING

Data-driven semi-supervised and supervised learning algorithms for health monitoring of pipes

(2019) Debarshi Sen et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Implementation of heterodyning effect for monitoring the health of adhesively bonded and fastened composite joints

(2018) Shervin Tashakori et al.   APPLIED OCEAN RESEARCH

Smart reinforcement steel bars with low-cost MEMS sensors for the structural health monitoring of RC structures

(2018) F. Tondolo et al.   CONSTRUCTION AND BUILDING MATERIALS

Wind Turbine Condition Monitoring Strategy through Multiway PCA and Multivariate Inference

(2018) Francesc Pozo et al.   Energies

Feature Extraction for Robust Crack Monitoring Using Passive Wireless RFID Antenna Sensors

(2018) Jun Zhang et al.   IEEE SENSORS JOURNAL

A Comparative Study of Impedance Measurement Techniques for Structural Health Monitoring Applications

(2018) Danilo Ecidir Budoya et al.   IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT

Probabilistic examination of the change in eigenfrequencies of an offshore wind turbine under progressive scour incorporating soil spatial variability

(2018) L.J. Prendergast et al.   MARINE STRUCTURES

Development of comprehensive heterodyne effect based inspection (CHEBI) method for inclusive monitoring of cracks

(2018) Amin Baghalian et al.   MEASUREMENT

A review of some advanced sensors used for health diagnosis of civil engineering structures

(2018) Swagato Das et al.   MEASUREMENT

Reliability based impact localization in composite panels using Bayesian updating and the Kalman filter

(2018) Llewellyn Morse et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

A comparison of linear approaches to filter out environmental effects in structural health monitoring

(2018) A. Deraemaeker et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

On switching response surface models, with applications to the structural health monitoring of bridges

(2018) K. Worden et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Structural Health Monitoring system based on a concept of Lamb wave focusing by the piezoelectric array

(2018) Pawel Kudela et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Design and development of microstrip patch antenna with circular and rectangular slot for structural health monitoring

(2018) T. V. Padmavathy et al.   Personal and Ubiquitous Computing

Optimization and Analysis of a U-Shaped Linear Piezoelectric Ultrasonic Motor Using Longitudinal Transducers

(2018) Hongpeng Yu et al.   SENSORS

Development of a High-Sensitivity Wireless Accelerometer for Structural Health Monitoring

(2018) Li Zhu et al.   SENSORS

Cost–Benefit Optimization of Structural Health Monitoring Sensor Networks

(2018) Giovanni Capellari et al.   SENSORS

Prognosis of fatigue and impact induced damage in concrete using embedded piezo-transducers

(2018) Anjaneya Dixit et al.   SENSORS AND ACTUATORS A-PHYSICAL

Composites Bond Inspection Using Heterodyne Effect and SuRE Methods

(2018) Shervin Tashakori et al.   SHOCK AND VIBRATION

SHM via topological derivative

(2018) A Martínez et al.   Smart Materials and Structures

Numerical study on static component generation from the primary Lamb waves propagating in a plate with nonlinearity

(2018) Xiang Wan et al.   Smart Materials and Structures

Shaking table tests for the experimental verification of the effectiveness of an automated modal parameter monitoring system for existing bridges in seismic areas

(2018) C. Rainieri et al.   Structural Control & Health Monitoring

An acousto-ultrasonics approach for probabilistic modelling and inference based on Gaussian processes

(2018) Miguel Angel Torres-Arredondo et al.   Structural Control & Health Monitoring

Predicting the variability of natural frequencies and its causes by Second-Order Blind Identification

(2018) Carlo Rainieri et al.   STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL

Damage Identification of Large Generator Stator Insulation Based on PZT Sensor Systems and Hybrid Features of Lamb Waves

(2018) Ruihua Li et al.   SENSORS

Vibration-based damage detection in a wind turbine using 1 year of data

(2018) Gustavo Oliveira et al.   Structural Control & Health Monitoring

A Damage Classification Approach for Structural Health Monitoring Using Machine Learning

(2018) Diego Tibaduiza et al.   COMPLEXITY

In-Fiber Integrated Sensor Array With Embedded Weakly Reflective Joint Surface

(2018) Wenchao Li et al.   JOURNAL OF LIGHTWAVE TECHNOLOGY

Fabrication of bulk piezoelectric and dielectric BaTiO3 ceramics using paste extrusion 3D printing technique

(2018) Hoejin Kim et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Implementation of a Piezo-diagnostics Approach for Damage Detection Based on PCA in a Linux-Based Embedded Platform

(2018) Jhonatan Camacho et al.   SENSORS

PZT/PZT and PZT/BiT Composite Piezo-Sensors in Aerospace SHM Applications: Photochemical Metal Organic + Infiltration Deposition and Characterization

(2018) Hamidreza Hoshyarmanesh et al.   SENSORS

Analysis of Errors in the Estimation of Impact Positions in Plate-Like Structure through the Triangulation Formula by Piezoelectric Sensors Monitoring

(2018) Eugenio Marino-Merlo et al.   SENSORS

Experimental evaluation of the performance of arrays of MEMS accelerometers

(2018) Fanis Moschas et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Identification of breathing type disbonds in stiffened panels using non-linear lamb waves and built-in circular PWT array

(2018) Deba Datta Mandal et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Statistical pattern recognition approach for long-time monitoring of the G.Meazza stadium by means of AR models and PCA

(2017) Alessio Datteo et al.   ENGINEERING STRUCTURES

Structural Health Monitoring Using Wireless Sensor Networks: A Comprehensive Survey

(2017) Adam B. Noel et al.   IEEE Communications Surveys and Tutorials

Wireless MEMS-Based Accelerometer Sensor Boards for Structural Vibration Monitoring: A Review

(2017) Alessandro Sabato et al.   IEEE SENSORS JOURNAL

Dependable Structural Health Monitoring Using Wireless Sensor Networks

(2017) Md Zakirul Alam Bhuiyan et al.   IEEE Transactions on Dependable and Secure Computing

Design and Implementation of an Accurate, Portable, and Time-Efficient Impedance-Based Transceiver for Structural Health Monitoring

(2017) Hamidreza Hoshyarmanesh et al.   IEEE-ASME TRANSACTIONS ON MECHATRONICS

A Novel White Light Interference Based AFM Head

(2017) Wenjun Yang et al.   JOURNAL OF LIGHTWAVE TECHNOLOGY

Guaranteeing robustness of structural condition monitoring to environmental variability

(2017) Kendra Van Buren et al.   JOURNAL OF SOUND AND VIBRATION

Nonlinear secondary noise sources for passive defect detection using ultrasound sensors

(2017) Lynda Chehami et al.   JOURNAL OF SOUND AND VIBRATION

Vibration-based monitoring and diagnostics using compressive sensing

(2017) Vaahini Ganesan et al.   JOURNAL OF SOUND AND VIBRATION

Development of sensor validation methodologies for structural health monitoring: A comprehensive review

(2017) Ting-Hua Yi et al.   MEASUREMENT

Malfunction diagnosis of sensors based on correlation of measurements

(2017) Wei Lu et al.   MEASUREMENT SCIENCE and TECHNOLOGY

Comparison of alternatives to amplitude thresholding for onset detection of acoustic emission signals

(2017) F. Bai et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Decision making framework for optimal SHM planning of ship structures considering availability and utility

(2017) Samantha Sabatino et al.   OCEAN ENGINEERING

An international review of laser Doppler vibrometry: Making light work of vibration measurement

(2017) S.J. Rothberg et al.   OPTICS AND LASERS IN ENGINEERING

Distributed Piezoelectric Sensor System for Damage Identification in Structures Subjected to Temperature Changes

(2017) Jaime Vitola et al.   SENSORS

Fiber Optic Sensor Embedment Study for Multi-Parameter Strain Sensing

(2017) Monssef Drissi-Habti et al.   SENSORS

A Sensor Data Fusion System Based on k-Nearest Neighbor Pattern Classification for Structural Health Monitoring Applications

(2017) Jaime Vitola et al.   SENSORS

Multi-objective probabilistic optimum monitoring planning considering fatigue damage detection, maintenance, reliability, service life and cost

(2017) Sunyong Kim et al.   STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

Visual-inertial displacement sensing using data fusion of vision-based displacement with acceleration

(2017) Jong-Woong Park et al.   Structural Control & Health Monitoring

Multiway principal component analysis contributions for structural damage localization

(2017) Magda Ruiz et al.   STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL

New Endoscopic Imaging Technology Based on MEMS Sensors and Actuators

(2017) Zhen Qiu et al.   Micromachines

Structural Health Monitoring Framework Based on Internet of Things: A Survey

(2017) C. Arcadius Tokognon et al.   IEEE Internet of Things Journal

A survey on ambient energy sources and harvesting methods for structural health monitoring applications

(2017) Shihua Cao et al.   Advances in Mechanical Engineering

Review on pressure sensors for structural health monitoring

(2017) Samiksha Sikarwar et al.   Photonic Sensors

Characterisation of Damaged Tubular Composites by Acoustic Emission, Thermal Diffusivity Mapping and TSR-RGB Projection Technique

(2016) Neha Chandarana et al.   APPLIED COMPOSITE MATERIALS

On Real-Time Fault Detection in Wind Turbines: Sensor Selection Algorithm and Detection Time Reduction Analysis

(2016) Francesc Pozo et al.   Energies

A Novel Wireless Accelerometer Board for Measuring Low-Frequency and Low-Amplitude Structural Vibration

(2016) Alessandro Sabato et al.   IEEE SENSORS JOURNAL

Uncertainty quantification in structural health monitoring: Applications on cultural heritage buildings

(2016) Filippo Lorenzoni et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Damage detection of TLP and Spar floating wind turbine using dynamic response of the structure

(2016) Aysan Jamalkia et al.   OCEAN ENGINEERING

Expected Utility Theory for Monitoring-Based Decision-Making

(2016) Carlo Cappello et al.   PROCEEDINGS OF THE IEEE

MEMS sensor fusion: Acoustic emission and strain

(2016) Hossain Saboonchi et al.   SENSORS AND ACTUATORS A-PHYSICAL

Guided wave based structural health monitoring: A review

(2016) Mira Mitra et al.   Smart Materials and Structures

Canonical correlation analysis based fault diagnosis method for structural monitoring sensor networks

(2016) Hai-Bin Huang et al.   Smart Structures and Systems

Modeling and harnessing sparse and low-rank data structure: a new paradigm for structural dynamics, identification, damage detection, and health monitoring

(2016) Satish Nagarajaiah et al.   Structural Control & Health Monitoring

Detection of structural changes through principal component analysis and multivariate statistical inference

(2016) Francesc Pozo et al.   STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL

A Multi-Level Decision Fusion Strategy for Condition Based Maintenance of Composite Structures

(2016) Zahra Sharif Khodaei et al.   Materials

Damage Identification and Performance Assessment of Regular and Irregular Buildings Using Wavelet Transform Energy

(2016) Mosbeh R. Kaloop et al.   Advances in Materials Science and Engineering

Development of technique capable of identifying different corrosion stages in reinforced concrete

(2015) Lei Qin et al.   APPLIED ACOUSTICS

Simulation Methods for Guided Wave-Based Structural Health Monitoring: A Review

(2015) C. Willberg et al.   Applied Mechanics Reviews

Damage classification in carbon fibre composites using acoustic emission: A comparison of three techniques

(2015) John P. McCrory et al.   COMPOSITES PART B-ENGINEERING

Wind Turbine Fault Detection through Principal Component Analysis and Statistical Hypothesis Testing

(2015) Francesc Pozo et al.   Energies

Data Management System for Structural Health Monitoring

(2015) Adam Dreyton Ferreira dos Santos et al.   IEEE Latin America Transactions

Low-Latency Data Acquisition Hardware for Real-Time Wireless Sensor Applications

(2015) Lauren E. Linderman et al.   IEEE SENSORS JOURNAL

An Approach of Reliable Data Transmission With Random Redundancy for Wireless Sensors in Structural Health Monitoring

(2015) Zilong Zou et al.   IEEE SENSORS JOURNAL

Categories of SHM Deployments: Technologies and Capabilities

(2015) G. T. Webb et al.   Journal of Bridge Engineering

Structural damage detection using principal component analysis and damage indices

(2015) Diego A Tibaduiza et al.   JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES

Detection of cuts and impact damage at the aircraft wing slat by using Lamb wave method

(2015) V.Y. Senyurek   MEASUREMENT

Development and validation of an automated operational modal analysis algorithm for vibration-based monitoring and tensile load estimation

(2015) Carlo Rainieri et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Application of electromechanical impedance-based SHM for damage detection in bolted pipeline connection

(2015) Adam Martowicz et al.   Nondestructive Testing and Evaluation

Review on energy harvesting for structural health monitoring in aeronautical applications

(2015) Minh Quyen Le et al.   PROGRESS IN AEROSPACE SCIENCES

Low-frequency broadband ultrasonic transducers for testing articles manufactured of large-structure and composite materials. Part 1. complete and partial degeneracy of vibration modes in piezoelectric elements of different geometric shapes

(2015) A. I. Potapov et al.   RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING

A Bioinspired Methodology Based on an Artificial Immune System for Damage Detection in Structural Health Monitoring

(2015) Maribel Anaya et al.   SHOCK AND VIBRATION

A review of damage detection methods for wind turbine blades

(2015) Dongsheng Li et al.   Smart Materials and Structures

Signal-based nonlinear modelling for damage assessment under variable temperature conditions by means of acousto-ultrasonics

(2015) M.-A. Torres-Arredondo et al.   Structural Control & Health Monitoring

Proof of concept of the structural health monitoring of framed structures by a novel combined experimental and theoretical approach

(2015) D. Isidori et al.   Structural Control & Health Monitoring

A Lamb waves based statistical approach to structural health monitoring of carbon fibre reinforced polymer composites

(2015) Michele Carboni et al.   ULTRASONICS

The reflection of guided waves from simple dents in pipes

(2015) Shuyi Ma et al.   ULTRASONICS

Modal Analysis With Compressive Measurements

(2014) Jae Young Park et al.   IEEE TRANSACTIONS ON SIGNAL PROCESSING

Fiber Bragg Grating Sensors toward Structural Health Monitoring in Composite Materials: Challenges and Solutions

(2014) Damien Kinet et al.   SENSORS

Data-driven methodology to detect and classify structural changes under temperature variations

(2014) Maribel Anaya et al.   Smart Materials and Structures

Wind turbine blade damage detection using an active sensing approach

(2014) Jiabiao Ruan et al.   Smart Materials and Structures

Review of Benchmark Studies and Guidelines for Structural Health Monitoring

(2013) Linren Zhou et al.   ADVANCES IN STRUCTURAL ENGINEERING

Corrosion assessment of reinforced concrete structures based on equivalent structural parameters using electro-mechanical impedance technique

(2013) Visalakshi Talakokula et al.   JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES

Detection, identification, and quantification of sensor fault in a sensor network

(2013) Jyrki Kullaa   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

A study of two unsupervised data driven statistical methodologies for detecting and classifying damages in structural health monitoring

(2013) D.-A. Tibaduiza et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

A structural damage detection indicator based on principal component analysis and statistical hypothesis testing

(2013) L E Mujica et al.   Smart Materials and Structures

Damage assessment with state–space embedding strategy and singular value decomposition under stochastic excitation

(2013) Gang Liu et al.   STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL

Output-only structural health monitoring in changing environmental conditions by means of nonlinear system identification

(2013) Edwin Reynders et al.   STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL

Damage detection by using FBGs and strain field pattern recognition techniques

(2012) Julián Sierra-Pérez et al.   Smart Materials and Structures

Damage classification in structural health monitoring using principal component analysis and self-organizing maps

(2012) D. A. Tibaduiza et al.   Structural Control & Health Monitoring

Predictive modeling of electromechanical impedance spectroscopy for composite materials

(2012) Matthieu Gresil et al.   STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL

Local ICA for multivariate statistical fault diagnosis in systems with unknown signal and error distributions

(2011) Zhiqiang Ge et al.   AICHE JOURNAL

Unsupervised and supervised classification of AE data collected during fatigue test on CMC at high temperature

(2011) S. Momon et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Wireless Measurement System for Structural Health Monitoring With High Time-Synchronization Accuracy

(2011) Alvaro Araujo et al.   IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT

Cavity-Enhanced Direct Frequency Comb Spectroscopy: Technology and Applications

(2010) Florian Adler et al.   Annual Review of Analytical Chemistry

Analysis of the strain transfer in a new FBG sensor for Structural Health Monitoring

(2010) Benjamin Torres et al.   ENGINEERING STRUCTURES

Structural health monitoring techniques for aircraft composite structures

(2010) K. Diamanti et al.   PROGRESS IN AEROSPACE SCIENCES

Adhesive Layer Effects on PZT-induced Lamb Waves at Elevated Temperatures

(2010) Sungwon Ha et al.   STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL

Feature Extraction and Sensor Fusion for Ultrasonic Structural Health Monitoring Under Changing Environmental Conditions

(2009) Yinghui Lu et al.   IEEE SENSORS JOURNAL

A Bayesian approach to optimal sensor placement for structural health monitoring with application to active sensing

(2009) Eric B. Flynn et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Another look at statistical learning theory and regularization

(2009) Vladimir Cherkassky et al.   NEURAL NETWORKS

Fuzzy Clustering of Stability Diagrams for Vibration-Based Structural Health Monitoring

(2008) E. Peter Carden et al.   COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING

Structural health monitoring and reliability estimation: Long span truss bridge application with environmental monitoring data

(2008) F. Necati Catbas et al.   ENGINEERING STRUCTURES

Structural health monitoring for a wind turbine system: a review of damage detection methods

(2008) Chia Chen Ciang et al.   MEASUREMENT SCIENCE and TECHNOLOGY