Influence of pulsed current arc welding to preclude the topological phases in the aerospace grade Alloy X

Study of high frequency pulsed arc on molten pool thermal properties of Ti-6Al-4V

(2019) Ling Li et al.   Journal of Manufacturing Processes

Preclusion of carbide precipitates in the Hastelloy X weldment using the current pulsing technique

(2019) M. Sathishkumar et al.   Journal of Manufacturing Processes

Hot corrosion behaviour of continuous and pulsed current gas tungsten arc welded Hastelloy X in different molten salts environment

(2019) M Sathishkumar et al.   Materials Research Express

The oscillation of stationary weld pool surface in the GTA welding

(2018) J.K. Huang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Evolution of carbide precipitates in Hastelloy N joints during welding and post weld heat treatment

(2018) Wanxia Wang et al.   MATERIALS CHARACTERIZATION

Laser powder bed fusion of Hastelloy X: Effects of hot isostatic pressing and the hot cracking mechanism

(2018) Quanquan Han et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Development of welding technique to suppress the microsegregation in the aerospace grade alloy 80A by conventional current pulsing technique

(2018) Subramani P et al.   Journal of Manufacturing Processes

Laser assisted direct energy deposition of Hastelloy-X

(2018) A.N. Jinoop et al.   OPTICS AND LASER TECHNOLOGY

The comparative evaluation of AISI 316/A387-Gr.91 steels dissimilar weld metal produced by CCGTAW and PCGTAW processes

(2018) Mohammad Jula et al.   Journal of Manufacturing Processes

Study on effect of double austenitization treatment on fracture morphology tensile tested nuclear grade P92 steel

(2018) Chandan Pandey et al.   ENGINEERING FAILURE ANALYSIS

Softening mechanism of P91 steel weldments using heat treatments

(2018) Chandan Pandey et al.   Archives of Civil and Mechanical Engineering

Study of the fracture surface morphology of impact and tensile tested cast and forged (C&F) Grade 91 steel at room temperature for different heat treatment regimes

(2017) Chandan Pandey et al.   ENGINEERING FAILURE ANALYSIS

A comparative study of pulsed laser and pulsed TIG welding of Ti-5Al-2.5Sn titanium alloy sheet

(2017) M. Junaid et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Evaluation of microstructural and mechanical properties of Fe-16Cr-1Ni-9Mn-0.12N austenitic stainless steel welded joints

(2017) Manidipto Mukherjee et al.   MATERIALS CHARACTERIZATION

Development of welding technology for improving the metallurgical and mechanical properties of 21st century nickel based superalloy 686

(2017) B. Arulmurugan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Characterization of microstructure of HAZs in as-welded and service condition of P91 pipe weldments

(2017) C. Pandey et al.   METALS AND MATERIALS INTERNATIONAL

Microstructure and phase transformation on the surface of Inconel 718 alloys fabricated by SLM under 1050°C solid solution + double ageing

(2017) Ke-yun Feng et al.   VACUUM

Microstructure characteristic and mechanical property of pulsed laser lap-welded nickel-based superalloy and stainless steel

(2017) Siyu Zhou et al.   Journal of Manufacturing Processes

Development of welding technique to avoid the sensitization in the alloy 600 by conventional Gas Tungsten Arc Welding method

(2017) A. Srikanth et al.   Journal of Manufacturing Processes

Studies of the mechanism of metal dusting of 10CrMo9-10 steel after 10 years of operation in the semi-regenerative catalytic reformer

(2016) Marek Szkodo et al.   CORROSION SCIENCE

On the prediction of effect of direction of welding on bead geometry and residual deformation of double-sided fillet welds

(2016) C. Pandey et al.   International Journal of Steel Structures

Effect of Groove Design and Post-Weld Heat Treatment on Microstructure and Mechanical Properties of P91 Steel Weld

(2016) C. Pandey et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Microstructure characterization and hardness distribution of 13Cr4Ni multipass weld metal

(2016) Mohsen Mokhtabad Amrei et al.   MATERIALS CHARACTERIZATION

Hot cracking in laser welding of Hastelloy X with pulsed Nd:YAG and continuous wave fiber lasers

(2016) M. Pakniat et al.   MATERIALS & DESIGN

Controlling hot cracking in Ni-based Inconel-718 superalloy cast sheets during tungsten inert gas welding

(2015) Xin Ye et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Influence of modes of metal transfer on grain structure and direction of grain growth in low nickel austenitic stainless steel weld metals

(2015) Manidipto Mukherjee et al.   MATERIALS CHARACTERIZATION

Investigation into the influence of post-weld heat treatment on the microstructure and hardness of Inconel X-750

(2015) Prachya Peasura et al.   Advances in Mechanical Engineering

Effects of gravity on mechanical properties of GTA welded joints

(2014) Hamid Eisazadeh et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effects of heat input on microstructure of tungsten inert gas welding used hastelloy X

(2014) R. Sihotang et al.   MATERIALS RESEARCH INNOVATIONS

Effect of weld cooling rate on Laves phase formation in Inconel 718 fusion zone

(2013) S.G.K. Manikandan et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effects of temperature and strain range on fatigue cracking behavior in Hastelloy X

(2008) H.U. Hong et al.   MATERIALS LETTERS

Effect of microstructure on impact toughness of pulsed current GTA welded α–β titanium alloy

(2007) M. Balasubramanian et al.   MATERIALS LETTERS