Bolometer developments in diagnostics for magnetic confinement fusion

Diagnostics for plasma control – From ITER to DEMO

(2019) W. Biel et al.   FUSION ENGINEERING AND DESIGN

Conceptual studies on spectroscopy and radiation diagnostic systems for plasma control on DEMO

(2019) W. Gonzalez et al.   FUSION ENGINEERING AND DESIGN

Plasma radiation studies in Magnum-PSI using resistive bolometry

(2018) Gustaaf van Eden et al.   NUCLEAR FUSION

A fiber-optic bolometer based on a high-finesse silicon Fabry-Pérot interferometer

(2018) Qiwen Sheng et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Description of complex viewing geometries of fusion tomography diagnostics by ray-tracing

(2018) M. Carr et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Improvement of infrared imaging video bolometer for application to deuterium experiment on the large helical device

(2018) K. Mukai et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Calibration parameter drift compensation of metal resistive bolometers operating in a thermal varying environment

(2017) F. Penzel et al.   FUSION ENGINEERING AND DESIGN

An alternative geometry for bolometer sensors for use at high operating temperatures

(2016) H. Meister et al.   FUSION ENGINEERING AND DESIGN

Non-monotonic growth rates of sawtooth precursors evidenced with a new method on ASDEX Upgrade

(2016) D. Vezinet et al.   NUCLEAR FUSION

Disruption mitigation by injection of small quantities of noble gas in ASDEX Upgrade

(2016) G Pautasso et al.   PLASMA PHYSICS AND CONTROLLED FUSION

Preliminary design of a tangentially viewing imaging bolometer for NSTX-U

(2016) B. J. Peterson et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

In situ calibration of the foil detector for an infrared imaging video bolometer using a carbon evaporation technique

(2016) K. Mukai et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Operation of bolometer system using Pt foil on SiN substrate detector for EAST tokamak

(2016) Y. M. Duan et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

A novel carbon coating technique for foil bolometers

(2016) U. A. Sheikh et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Development of plasma bolometers using fiber-optic temperature sensors

(2016) M. L. Reinke et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Chapter 7: Tomography Diagnostics: Bolometry and Soft-X-Ray Detection

(2016) L. C. Ingesson et al.   FUSION SCIENCE AND TECHNOLOGY

DEMO diagnostics and burn control

(2015) Wolfgang Biel et al.   FUSION ENGINEERING AND DESIGN

Millimetre wave attenuation of prototype diagnostic components for the ITER bolometers

(2015) H. Meister et al.   FUSION ENGINEERING AND DESIGN

High density operation for reactor-relevant power exhaust

(2015) M. Wischmeier   JOURNAL OF NUCLEAR MATERIALS

Experimental studies and modeling of complete H-mode divertor detachment in ASDEX Upgrade

(2015) F. Reimold et al.   JOURNAL OF NUCLEAR MATERIALS

Optimisation of design parameters for collimators and pin-holes of bolometer cameras

(2014) H. Meister et al.   FUSION ENGINEERING AND DESIGN

Application of AXUV diode detectors at ASDEX Upgrade

(2014) M. Bernert et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Broad-band efficiency calibration of ITER bolometer prototypes using Pt absorbers on SiN membranes

(2013) H. Meister et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Reliability issues for a bolometer detector for ITER at high operating temperatures

(2012) H. Meister et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Design criteria of the bolometer diagnostic for steady-state operation of the W7-X stellarator

(2010) D. Zhang et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

The ITER bolometer diagnostic: Status and plans

(2008) H. Meister et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Two dimensional radiated power diagnostics on Alcator C-Mod

(2008) M. L. Reinke et al.   REVIEW OF SCIENTIFIC INSTRUMENTS