Finite element analysis of polyethylene wear in total hip replacement: A literature review

Current concepts in acetabular positioning in total hip arthroplasty

(2017) Tim Board et al.   Indian Journal of Orthopaedics

Is there a role for femoral offset restoration during total hip arthroplasty? A systematic review

(2017) M. De Fine et al.   Orthopaedics & Traumatology-Surgery & Research

A patient-specific wear prediction framework for an artificial knee joint with coupled musculoskeletal multibody-dynamics and finite element analysis

(2017) Jing Zhang et al.   TRIBOLOGY INTERNATIONAL

The study of wear behaviors on abducted hip joint prostheses by an alternate finite element approach

(2016) Yi-Tsung Lin et al.   COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE

Numerical and experimental investigations for the evaluation of the wear coefficient of reverse total shoulder prostheses

(2016) Lorenza Mattei et al.   Journal of the Mechanical Behavior of Biomedical Materials

Effect of size and dimensional tolerance of reverse total shoulder arthroplasty on wear: An in-silico study

(2016) Lorenza Mattei et al.   Journal of the Mechanical Behavior of Biomedical Materials

A comparison between dynamic implicit and explicit finite element simulations of the native knee joint

(2016) Hamid Naghibi Beidokhti et al.   MEDICAL ENGINEERING & PHYSICS

Influence of hip joint simulator design and mechanics on the wear and creep of metal-on-polyethylene bearings

(2016) Murat Ali et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE

A review of squeaking in ceramic total hip prostheses

(2016) Ehsan Askari et al.   TRIBOLOGY INTERNATIONAL

Four decades of finite element analysis of orthopaedic devices: Where are we now and what are the opportunities?

(2015) Mark Taylor et al.   JOURNAL OF BIOMECHANICS

Wear characteristics of WSU total ankle replacement devices under shear and torsion loads

(2015) Dinesh Gundapaneni et al.   Journal of the Mechanical Behavior of Biomedical Materials

Effect of cup inclination on predicted contact stress-induced volumetric wear in total hip replacement

(2014) B. Rijavec et al.   COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING

Contact mechanics of modular metal-on-polyethylene total hip replacement under adverse edge loading conditions

(2014) Xijin Hua et al.   JOURNAL OF BIOMECHANICS

An energy dissipation and cross shear time dependent computational wear model for the analysis of polyethylene wear in total knee replacements

(2014) Sean T. O'Brien et al.   JOURNAL OF BIOMECHANICS

Edge loading does not increase wear rates of ceramic-on-ceramic and metal-on-polyethylene articulations

(2014) Jelle J. Halma et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Finite element analysis of stress and wear characterization in total ankle replacements

(2014) Bradley Jay Elliot et al.   Journal of the Mechanical Behavior of Biomedical Materials

Computational analysis of polyethylene wear in anatomical and reverse shoulder prostheses

(2014) C. Quental et al.   MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING

The effect of insert conformity and material on total knee replacement wear

(2013) Abdellatif Abdelgaied et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE

Highly Crosslinked Polyethylene Does Not Reduce Aseptic Loosening in Cemented THA 10-year Findings of a Randomized Study

(2012) Per-Erik Johanson et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Edge Loading Has a Paradoxical Effect on Wear in Metal-on-Polyethylene Total Hip Arthroplasties

(2012) William H. Harris   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

A Prospective, Randomized Study of Cross-Linked and Non–Cross-Linked Polyethylene for Total Hip Arthroplasty at 10-Year Follow-Up

(2012) Charles A. Engh et al.   JOURNAL OF ARTHROPLASTY

Computational modelling of polyethylene wear and creep in total hip joint replacements: Effect of the bearing clearance and diameter

(2012) Feng Liu et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Computational development of a polyethylene wear model for the articular and backside surfaces in modular total knee replacements

(2012) S. O'Brien et al.   TRIBOLOGY INTERNATIONAL

Effect of motion inputs on the wear prediction of artificial hip joints

(2012) Feng Liu et al.   TRIBOLOGY INTERNATIONAL

A comparative study of wear laws for soft-on-hard hip implants using a mathematical wear model

(2012) L. Mattei et al.   TRIBOLOGY INTERNATIONAL

Performance analysis of the RandomPOD wear test system

(2012) Vesa Saikko et al.   WEAR

A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation to the coronal plane

(2012) R.D. Queiroz et al.   WEAR

History and Systematic Review of Wear and Osteolysis Outcomes for First-generation Highly Crosslinked Polyethylene

(2011) Steven M. Kurtz et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Wear analysis in anatomical and reversed shoulder prostheses

(2011) N. S. Ribeiro et al.   COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING

Computational wear prediction of artificial knee joints based on a new wear law and formulation

(2011) Abdellatif Abdelgaied et al.   JOURNAL OF BIOMECHANICS

Bioengineering reasons for the failure of metal-on-metal hip prostheses

(2011) J. Fisher   JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME

Predicting wear of UHMWPE: Decreasing wear rate following a change in direction

(2011) Matthew R. Dressler et al.   WEAR

Predicting implant UHMWPE wear in-silico: A robust, adaptable computational–numerical framework for future theoretical models

(2011) M.A. Strickland et al.   WEAR

Continued Improved Wear with an Annealed Highly Cross-linked Polyethylene

(2010) William N. Capello et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

The effect of obesity on the outcome of hip and knee arthroplasty

(2010) Eric Yeung et al.   INTERNATIONAL ORTHOPAEDICS

The Influence of the Pelvic Bone on the Computational Results of the Acetabular Component of a Total Hip Prosthesis

(2010) Sara Barreto et al.   JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME

Cross-shear implementation in sliding-distance-coupled finite element analysis of wear in metal-on-polyethylene total joint arthroplasty: Intervertebral total disc replacement as an illustrative application

(2010) Curtis M. Goreham-Voss et al.   JOURNAL OF BIOMECHANICS

A New Formulation for the Prediction of Polyethylene Wear in Artificial Hip Joints

(2010) F Liu et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE

Lubrication and wear modelling of artificial hip joints: A review

(2010) L. Mattei et al.   TRIBOLOGY INTERNATIONAL

2009 Knee Society Presidential Guest Lecture: Polyethylene Wear in Total Knees

(2009) John Fisher et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Acetabular Polyethylene Wear and Acetabular Inclination and Femoral Offset

(2009) Nick J. Little et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Clinical Comparison of Polyethylene Wear with Zirconia or Cobalt-Chromium Femoral Heads

(2009) Maiken Stilling et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Two-Year Radiostereometric Analysis Evaluation of Femoral Head Penetration in a Challenging Population of Young Total Hip Arthroplasty Patients

(2009) David C. Ayers et al.   JOURNAL OF ARTHROPLASTY

Hylamer vs Conventional Polyethylene in Primary Total Hip Arthroplasty: A Long-Term Case-Control Study of Wear Rates and Osteolysis

(2009) James I. Huddleston et al.   JOURNAL OF ARTHROPLASTY

Design Optimization of a Total Hip Prosthesis for Wear Reduction

(2009) George Matsoukas et al.   JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME

Total Hip Wear Assessment: A Comparison Between Computational and In Vitro Wear Assessment Techniques Using ISO 14242 Loading and Kinematics

(2009) George Matsoukas et al.   JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME

Enhanced computational prediction of polyethylene wear in hip joints by incorporating cross-shear and contact pressure in additional to load and sliding distance: Effect of head diameter

(2009) Lu Kang et al.   JOURNAL OF BIOMECHANICS

Comparison of polyethylene wear in anatomical and reversed shoulder prostheses

(2009) A. Terrier et al.   JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME

Validation of computational models in biomechanics

(2009) H B Henninger et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE

Wear in Conventional and Highly Cross-Linked Polyethylene Cups

(2008) Christophe Olyslaegers et al.   JOURNAL OF ARTHROPLASTY

Five-Year Comparative Study of Highly Cross-Linked (Crossfire) and Traditional Polyethylene

(2008) Amar D. Rajadhyaksha et al.   JOURNAL OF ARTHROPLASTY

Predicting Knee Replacement Damage in a Simulator Machine Using a Computational Model With a Consistent Wear Factor

(2008) Dong Zhao et al.   JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME

Quantification of the effect of cross-shear on the wear of conventional and highly cross-linked UHMWPE

(2008) Lu Kang et al.   JOURNAL OF BIOMECHANICS

Wear simulation of ultra-high molecular weight polyethylene hip implants by incorporating the effects of cross-shear and contact pressure

(2008) L Kang et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE

Three dimensional shape optimization of total knee replacements for reduced wear

(2008) Ryan Willing et al.   STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

Preliminary tribological evaluation of nanostructured diamond coatings against ultra-high molecular weight polyethylene

(2007) Michael R. Hill et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS