Primary Processing Parameters, Porosity Production, and Fatigue Prediction for Additively Manufactured Alloy 718

Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength

(2018) S. Romano et al.   ENGINEERING FRACTURE MECHANICS

Relating porosity to fatigue failure in additively manufactured alloy 718

(2018) Luke Sheridan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A pore morphological study of gas-atomized Ti-6Al-4V powders by scanning electron microscopy and synchrotron X-ray computed tomography

(2018) G. Chen et al.   POWDER TECHNOLOGY

Experimental study on weld formation of Inconel 718 with fiber laser welding under reduced ambient pressure

(2018) Liqun Li et al.   VACUUM

Predictive models for fatigue property of laser powder bed fusion stainless steel 316L

(2018) Meng Zhang et al.   MATERIALS & DESIGN

Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting

(2017) Daniel Greitemeier et al.   INTERNATIONAL JOURNAL OF FATIGUE

Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting

(2017) Ming Tang et al.   INTERNATIONAL JOURNAL OF FATIGUE

Laser powder bed fusion of nickel alloy 625: Experimental investigations of effects of process parameters on melt pool size and shape with spatter analysis

(2017) Luis E. Criales et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting

(2017) Umberto Scipioni Bertoli et al.   MATERIALS & DESIGN

Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography

(2016) Ross Cunningham et al.   JOM

Reducing lack of fusion during selective laser melting of CoCrMo alloy: Effect of laser power on geometrical features of tracks

(2016) K. Darvish et al.   MATERIALS & DESIGN

Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting

(2016) Galina Kasperovich et al.   MATERIALS & DESIGN

Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting

(2015) Haijun Gong et al.   MATERIALS & DESIGN

Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing

(2014) Wayne E. King et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting

(2011) T. Vilaro et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

A study of the microstructural evolution during selective laser melting of Ti–6Al–4V

(2010) Lore Thijs et al.   ACTA MATERIALIA