The Influence of Freezing Temperature Storage on the Mechanical Durability of Commercial Pellets from Biomass

Pelleting of Pine and Switchgrass Blends: Effect of Process Variables and Blend Ratio on the Pellet Quality and Energy Consumption

(2019) Jaya Tumuluru   Energies

Smart Crack Control in Concrete through Use of Phase Change Materials (PCMs): A Review

(2018) Branko Šavija   Materials

BioEnergy and BioChemicals Production from Biomass and Residual Resources

(2018) Dimitar Karakashev et al.   Energies

Techno-economic and environmental assessments of storing woodchips and pellets for bioenergy applications

(2018) Kamalakanta Sahoo et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Kaolin as additive in wood pellet combustion with several mixtures of spruce and short-rotation-coppice willow and its influence on emissions and ashes

(2018) Matthias Gehrig et al.   FUEL

Mechanical degradation of biomass wood pellets during long term stockpile storage

(2017) Shalini Graham et al.   FUEL PROCESSING TECHNOLOGY

Mechanical and combustion properties of sawdust—Straw pellets blended in different proportions

(2017) Mateusz Stasiak et al.   FUEL PROCESSING TECHNOLOGY

Factors affecting wood, energy grass and straw pellet durability – A review

(2017) Carly Whittaker et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

GIS-based biomass assessment and supply logistics system for a sustainable biorefinery: A case study with cotton stalks in the Southeastern US

(2016) K. Sahoo et al.   APPLIED ENERGY

Biomass supply chain optimisation via novel Biomass Element Life Cycle Analysis (BELCA)

(2016) Chun Hsion Lim et al.   APPLIED ENERGY

Micro Combined Heat and Power to provide heat and electrical power using biomass and Gamma-type Stirling engine

(2016) Hojjatollah Damirchi et al.   APPLIED THERMAL ENGINEERING

Hay pellets — The influence of particle size reduction on their physical–mechanical quality and energy demand during production

(2016) Claudia Kirsten et al.   FUEL PROCESSING TECHNOLOGY

Mineral matter interactions during co-pyrolysis of coal and biomass and their impact on intrinsic char co-gasification reactivity

(2015) Naoko Ellis et al.   CHEMICAL ENGINEERING JOURNAL

Engineering Plant Biomass Lignin Content and Composition for Biofuels and Bioproducts

(2015) Cassie Welker et al.   Energies

Effect of process variables on the density and durability of the pellets made from high moisture corn stover

(2014) Jaya Shankar Tumuluru   BIOSYSTEMS ENGINEERING

Effect of binders on the durability of wood pellets fabricated from Larix kaemferi C. and Liriodendron tulipifera L. sawdust

(2013) Byoung Jun Ahn et al.   RENEWABLE ENERGY

Microbial communities in large-scale wood piles and their effects on wood quality and the environment

(2012) Matthias Noll et al.   APPLIED MICROBIOLOGY AND BIOTECHNOLOGY

Effect of miscanthus addition and different grinding processes on the quality of wood pellets

(2012) Bastian Lehmann et al.   BIOMASS & BIOENERGY

Effects of densification variables on the durability of wood pellets fabricated with Larix kaempferi C. and Liriodendron tulipifera L. sawdust

(2012) Soo min Lee et al.   BIOMASS & BIOENERGY

Physical and chemical properties of pellets from energy crops and cereal straws

(2012) John P. Carroll et al.   BIOSYSTEMS ENGINEERING

Development of energy and emission parameters for densified form of lignocellulosic biomass

(2011) Arifa Sultana et al.   ENERGY

Fuel pellets from biomass: The importance of the pelletizing pressure and its dependency on the processing conditions

(2011) Wolfgang Stelte et al.   FUEL

Grinding performance and physical properties of non-treated and steam exploded barley, canola, oat and wheat straw

(2010) Phani Adapa et al.   BIOMASS & BIOENERGY

A study of bonding and failure mechanisms in fuel pellets from different biomass resources

(2010) Wolfgang Stelte et al.   BIOMASS & BIOENERGY

Pellet production from agricultural raw materials – A systems study

(2010) Daniel Nilsson et al.   BIOMASS & BIOENERGY

Physical properties of pellets made from sorghum stalk, corn stover, wheat straw, and big bluestem

(2010) K. Theerarattananoon et al.   INDUSTRIAL CROPS AND PRODUCTS

Lignin and Biomass: A Negative Correlation for Wood Formation and Lignin Content in Trees

(2010) E. Novaes et al.   PLANT PHYSIOLOGY

The influence of raw material characteristics on the industrial pelletizing process and pellet quality

(2008) Mehrdad Arshadi et al.   FUEL PROCESSING TECHNOLOGY