Clinical Applications of 3‐Dimensional Printing Technology in Hip Joint

Preoperative Use of a 3D Printed Model for Femoroacetabular Impingement Surgery and Its Effect on Planned Osteoplasty

(2018) Tony T. Wong et al.   AMERICAN JOURNAL OF ROENTGENOLOGY

Evaluation of accuracy of virtual surgical planning for patient-specific pre-contoured plate in acetabular fracture fixation

(2018) Lalit Maini et al.   ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY

Clinical experience with three-dimensional printing techniques in orthopedic trauma

(2018) Ji Wan Kim et al.   JOURNAL OF ORTHOPAEDIC SCIENCE

Application of quality by design for 3D printed bone prostheses and scaffolds

(2018) Daniel Martinez-Marquez et al.   PLoS One

CT-based Navigation System Using a Patient-Specific Instrument for Femoral Component Positioning: An Experimental in vitro Study with a Sawbone Model

(2018) Seongpung Lee et al.   YONSEI MEDICAL JOURNAL

Clinical value of 3D printing guide plate in core decompression plus porous bioceramics rod placement for the treatment of early osteonecrosis of the femoral head

(2018) Bo Li et al.   Journal of Orthopaedic Surgery and Research

Efficacy of 3D Printed Models on Resident Learning and Understanding of Common Acetabular Fracturers

(2018) Omer A. Awan et al.   ACADEMIC RADIOLOGY

Surgical treatment for shepherd’s crook deformity in fibrous dysplasia: THERE IS NO BEST, ONLY BETTER

(2018) Jun Wan et al.   INTERNATIONAL ORTHOPAEDICS

Computer assisted surgery in preoperative planning of acetabular fracture surgery: state of the art

(2017) Mehdi Boudissa et al.   Expert Review of Medical Devices

Laparoscopic acetabular fracture fixation after three-dimensional modelling and printing

(2017) Wen-Hua Huang et al.   Indian Journal of Orthopaedics

A paradigm shift in surgical planning and simulation using 3Dgraphy: Experience of first 50 surgeries done using 3D-printed biomodels

(2017) Vaibhav Bagaria et al.   INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED

Computer-aided designed, three dimensional-printed hemipelvic prosthesis for peri-acetabular malignant bone tumour

(2017) Baichuan Wang et al.   INTERNATIONAL ORTHOPAEDICS

3D printed liner for treatment of periprosthetic joint infections

(2017) Tae Won B. Kim et al.   MEDICAL HYPOTHESES

Application of 3D printing for treating fractures of both columns of the acetabulum: Benefit of pre-contouring plates on the mirrored healthy pelvis

(2017) P. Upex et al.   Orthopaedics & Traumatology-Surgery & Research

3D printing technology used in severe hip deformity

(2017) Shanshan Wang et al.   Experimental and Therapeutic Medicine

Application of 3D printing rapid prototyping-assisted percutaneous fixation in the treatment of intertrochanteric fracture

(2017) Sheng-Nai Zheng et al.   Experimental and Therapeutic Medicine

Application of computer-aided design and 3D-printed navigation template in Locking Compression Pediatric Hip Plate $$^{\mathrm{TM}}$$ TM placement for pediatric hip disease

(2017) Pengfei Zheng et al.   International Journal of Computer Assisted Radiology and Surgery

Reconstruction with 3D-printed pelvic endoprostheses after resection of a pelvic tumour

(2017) H. Liang et al.   Bone & Joint Journal

How 3D patient-specific instruments improve accuracy of pelvic bone tumour resection in a cadaveric study

(2017) A. Sallent et al.   Bone & Joint Research

Internal Fixation of Complicated Acetabular Fractures Directed by Preoperative Surgery with 3D Printing Models

(2017) Zhao-jie Liu et al.   Orthopaedic Surgery

Patient-specific 3D models aid planning for triplane proximal femoral osteotomy in slipped capital femoral epiphysis

(2017) L. Cherkasskiy et al.   Journal of Childrens Orthopaedics

Image-guided installation of 3D-printed patient-specific implant and its application in pelvic tumor resection and reconstruction surgery

(2016) Xiaojun Chen et al.   COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE

A combination of three-dimensional printing and computer-assisted virtual surgical procedure for preoperative planning of acetabular fracture reduction

(2016) Canjun Zeng et al.   INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED

3D surgical printing and pre contoured plates for acetabular fractures

(2016) Francisco Chana-Rodríguez et al.   INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED

Minimally invasive plate osteosynthesis of acetabular anterior column fractures using the two-incision minimally invasive approach and a preshaped three dimension plate

(2016) Yan Zhuang et al.   INTERNATIONAL ORTHOPAEDICS

Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty

(2016) Sajad Arabnejad et al.   JOURNAL OF ORTHOPAEDIC RESEARCH

Application of a 3-dimensional printed navigation template in Bernese periacetabular osteotomies

(2016) You Zhou et al.   MEDICINE

Three-dimensional printing for preoperative planning of total hip arthroplasty revision: case report

(2016) Joseph Zerr et al.   SKELETAL RADIOLOGY

Printed Three-dimensional Anatomic Templates for Virtual Preoperative Planning Before Reconstruction of Old Pelvic Injuries: Initial Results

(2015) Jun-Qiang Wang et al.   CHINESE MEDICAL JOURNAL

Custom Acetabular Cages Offer Stable Fixation and Improved Hip Scores for Revision THA With Severe Bone Defects

(2015) Huiwu Li et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

One-step reconstruction with a 3D-printed, biomechanically evaluated custom implant after complex pelvic tumor resection

(2015) K. C. Wong et al.   Computer Aided Surgery

The use of customized cages in revision total hip arthroplasty for Paprosky type III acetabular bone defects

(2015) Yuanqing Mao et al.   INTERNATIONAL ORTHOPAEDICS

Application of Rapid Prototyping Pelvic Model for Patients with DDH to Facilitate Arthroplasty Planning: A Pilot Study

(2015) Jie Xu et al.   JOURNAL OF ARTHROPLASTY

Implantation of customized 3-D printed titanium prosthesis in limb salvage surgery: a case series and review of the literature

(2015) Hongbin Fan et al.   World Journal of Surgical Oncology

Custom osteotomy guides for resection of a pelvic chondrosarcoma

(2014) William G Blakeney et al.   Acta Orthopaedica

Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences

(2014) Bethany C. Gross et al.   ANALYTICAL CHEMISTRY

Evaluation of the accuracy of patient-specific cutting blocks for total knee arthroplasty: a meta-analysis

(2014) Etienne Cavaignac et al.   INTERNATIONAL ORTHOPAEDICS

Reconstruction of the hemipelvis with a modular prosthesis after resection of a primary malignant peri-acetabular tumour involving the sacroiliac joint

(2014) J. Zang et al.   Bone & Joint Journal

3D Printing and Neurosurgery—Ready for Prime Time?

(2013) Geraldine T. Klein et al.   World Neurosurgery

Poor Long-term Clinical Results of Saddle Prosthesis After Resection of Periacetabular Tumors

(2012) J. A. Jansen et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Augmented reality patient-specific reconstruction plate design for pelvic and acetabular fracture surgery

(2012) Fangyang Shen et al.   International Journal of Computer Assisted Radiology and Surgery

Bernese Periacetabular Osteotomy in Males: Is There an Increased Risk of Femoroacetabular Impingement (FAI) After Bernese Periacetabular Osteotomy?

(2010) K. Ziebarth et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Design and Primary Application of Computer-Assisted, Patient-Specific Navigational Templates in Metal-on-Metal Hip Resurfacing Arthroplasty

(2010) Yuan Z. Zhang et al.   JOURNAL OF ARTHROPLASTY

3D printing based on imaging data: review of medical applications

(2010) F. Rengier et al.   International Journal of Computer Assisted Radiology and Surgery

A novel computer-assisted drill guide template for lumbar pedicle screw placement: a cadaveric and clinical study

(2009) Sheng Lu et al.   International Journal of Medical Robotics and Computer Assisted Surgery