Laser Powder Bed Fusion of Stainless Steel Grades: A Review

Advanced Mechanical Strength in Post Heat Treated SLM 2507 at Room and High Temperature Promoted by Hard/Ductile Sigma Precipitates

(2019) Kamran Saeidi et al.   Metals

Identification and characterization of spatter particles and their effect on surface roughness, density and mechanical response of 17-4 PH stainless steel laser powder-bed fusion parts

(2019) Usman Ali et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the Evaluation of Surface Fatigue Strength of a Stainless-Steel Aeronautical Component

(2019) Cianetti et al.   Metals

An investigation into the effect of process parameters on melt pool geometry, cell spacing, and grain refinement during laser powder bed fusion

(2019) Ali Keshavarzkermani et al.   OPTICS AND LASER TECHNOLOGY

Fluid and particle dynamics in laser powder bed fusion

(2018) P. Bidare et al.   ACTA MATERIALIA

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

(2018) Tuan D. Ngo et al.   COMPOSITES PART B-ENGINEERING

Predictive simulation of process windows for powder bed fusion additive manufacturing: Influence of the powder size distribution

(2018) Alexander M. Rausch et al.   COMPUTERS & MATHEMATICS WITH APPLICATIONS

A review of the use of stainless steel for masonry repair and reinforcement

(2018) Marco Corradi et al.   CONSTRUCTION AND BUILDING MATERIALS

Fatigue life prediction of additively manufactured material: Effects of surface roughness, defect size, and shape

(2018) A. Yadollahi et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Application of additive manufacturing for mass customisation: understanding the interaction of critical barriers

(2018) Manish Shukla et al.   PRODUCTION PLANNING & CONTROL

Additive manufacturing of metallic components – Process, structure and properties

(2018) T. DebRoy et al.   PROGRESS IN MATERIALS SCIENCE

A comprehensive study on microstructure and tensile behaviour of a selectively laser melted stainless steel

(2018) Chunlei Qiu et al.   Scientific Reports

Predictive Simulation of Plastic Processing of Welded Stainless Steel Pipes

(2018) Riccardo Rufini et al.   Metals

A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties

(2018) Haniyeh Fayazfar et al.   MATERIALS & DESIGN

Selective laser melting finite element modeling: Validation with high-speed imaging and lack of fusion defects prediction

(2018) Claire Bruna-Rosso et al.   MATERIALS & DESIGN

Frontiers of Additively Manufactured Metallic Materials

(2018) Amir Zadpoor   Materials

Microstructure, Solidification Texture, and Thermal Stability of 316 L Stainless Steel Manufactured by Laser Powder Bed Fusion

(2018) Pavel Krakhmalev et al.   Metals

3-Dimensional heat transfer modeling for laser powder-bed fusion additive manufacturing with volumetric heat sources based on varied thermal conductivity and absorptivity

(2018) Zhidong Zhang et al.   OPTICS AND LASER TECHNOLOGY

Geometrical deviation identification and prediction method for additive manufacturing

(2018) Zhicheng Huang et al.   RAPID PROTOTYPING JOURNAL

Development of Laser-Based Powder Bed Fusion Process Parameters and Scanning Strategy for New Metal Alloy Grades: A Holistic Method Formulation

(2018) Elena Bassoli et al.   Materials

Control of Porosity in Parts Produced by a Direct Laser Melting Process

(2018) Tae Jeon et al.   Applied Sciences-Basel

Thermo-mechanical analyses for optimized path planning in laser aided additive manufacturing processes

(2018) K. Ren et al.   MATERIALS & DESIGN

Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel

(2018) Hahn Choo et al.   MATERIALS & DESIGN

High mechanical strengths and ductility of stainless steel 304L fabricated using selective laser melting

(2018) Q.B. Nguyen et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Common defects and contributing parameters in powder bed fusion AM process and their classification for online monitoring and control: a review

(2017) Ehsan Malekipour et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel

(2017) Aref Yadollahi et al.   INTERNATIONAL JOURNAL OF FATIGUE

Additive Manufacturing of Metallic Materials: A Review

(2017) Yi Zhang et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel

(2017) E. Liverani et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Mechanical properties and microstructural characterization of selective laser melted 17-4 PH stainless steel

(2017) Mohamad Mahmoudi et al.   RAPID PROTOTYPING JOURNAL

Inclusions in Stainless Steels − A Review

(2017) Joo Hyun Park et al.   STEEL RESEARCH INTERNATIONAL

Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties

(2017) Florian Hengsbach et al.   MATERIALS & DESIGN

Additive manufacturing of metals

(2016) Dirk Herzog et al.   ACTA MATERIALIA

Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones

(2016) Saad A. Khairallah et al.   ACTA MATERIALIA

A review on measurement science needs for real-time control of additive manufacturing metal powder bed fusion processes

(2016) Mahesh Mani et al.   INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH

The metallurgy and processing science of metal additive manufacturing

(2016) W. J. Sames et al.   INTERNATIONAL MATERIALS REVIEWS

Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting

(2016) R. Casati et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Theoretical and experimental study on surface roughness of 316L stainless steel metal parts obtained through selective laser melting

(2016) Di Wang et al.   RAPID PROTOTYPING JOURNAL

Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing

(2016) Sarah K. Everton et al.   MATERIALS & DESIGN

On the role of melt flow into the surface structure and porosity development during selective laser melting

(2015) Chunlei Qiu et al.   ACTA MATERIALIA

The Application of Powder Rheology in Additive Manufacturing

(2015) Jamie Clayton et al.   JOM

Metrology Needs for Metal Additive Manufacturing Powders

(2015) John A. Slotwinski et al.   JOM

Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting

(2015) H. P. Tang et al.   JOM

Decarburization of stainless steel during selective laser melting and its influence on Young's modulus, hardness and tensile strength

(2015) Xiao Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The present and future of additive manufacturing in the aerospace sector: A review of important aspects

(2015) Adrián Uriondo et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING

Powder-bed-based 3D-printing of function integrated parts

(2015) Johannes Glasschroeder et al.   RAPID PROTOTYPING JOURNAL

Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges

(2015) W. E. King et al.   Applied Physics Reviews

On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting

(2014) A. Riemer et al.   ENGINEERING FRACTURE MECHANICS

Density of additively-manufactured, 316L SS parts using laser powder-bed fusion at powers up to 400 W

(2014) Chandrika Kamath et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Additive Manufacturing: Making Imagination the Major Limitation

(2014) Yuwei Zhai et al.   JOM

Review of Adhesion Fundamentals for Micron-Scale Particles

(2014) Otis R. Walton   KONA Powder and Particle Journal

Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process

(2014) V. Manvatkar et al.   MATERIALS SCIENCE AND TECHNOLOGY

Mechanical Properties of Austenitic Stainless Steel Made by Additive Manufacturing

(2014) William E. Luecke et al.   JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY

A comparison of the tensile, fatigue, and fracture behavior of Ti–6Al–4V and 15-5 PH stainless steel parts made by selective laser melting

(2013) H. Khalid Rafi et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel

(2013) Kai Guan et al.   MATERIALS & DESIGN

A review on nickel-free nitrogen containing austenitic stainless steels for biomedical applications

(2013) Mohd Talha et al.   Materials Science & Engineering C-Materials for Biological Applications

Fatigue performance of additive manufactured metallic parts

(2013) A.B. Spierings et al.   RAPID PROTOTYPING JOURNAL

Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting

(2013) Lawrence E. Murr et al.   Journal of Materials Research and Technology-JMR&T

Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies

(2012) Lawrence E. Murr et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Overview of current additive manufacturing technologies and selected applications

(2012) Timothy J. Horn et al.   SCIENCE PROGRESS

Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts

(2011) A.B. Spierings et al.   RAPID PROTOTYPING JOURNAL

Mesoscopic simulation of selective beam melting processes

(2010) Carolin Körner et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods

(2009) Dongdong Gu et al.   MATERIALS & DESIGN

On the delamination and crack formation in a thin wall fabricated using laser solid freeform fabrication process: An experimental–numerical investigation

(2009) Masoud Alimardani et al.   OPTICS AND LASERS IN ENGINEERING

Stainless steel in construction: A review of research, applications, challenges and opportunities

(2008) N.R. Baddoo   JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH