Effects of reinforced nanofluid with nanoparticles on cutting tool wear morphology

Investigation of tool wear in the turning of Inconel 718 superalloy in terms of process performance and productivity enhancement

(2018) W. Grzesik et al.   TRIBOLOGY INTERNATIONAL

Novel uses of alumina/graphene hybrid nanoparticle additives for improved tribological properties of lubricant in turning operation

(2018) Anuj Kumar Sharma et al.   TRIBOLOGY INTERNATIONAL

A distributed dynamic mesh model of a helical gear pair with tooth profile errors

(2018) Qi-bin Wang et al.   Journal of Central South University

Microstructure, mechanical properties, and milling performance of arc-PVD AlTiN-Cu and AlTiN/AlTiN-Cu coatings

(2018) Hao Chen et al.   Journal of Central South University

Environmental-friendly turning of A286 superalloy

(2018) Seyed Hasan Musavi et al.   Journal of Manufacturing Processes

Recent progress on the application of nanofluids in minimum quantity lubrication machining: A review

(2017) Nor Azwadi Che Sidik et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Turning of Inconel 718 using inserts with cooling channels under high pressure jet coolant assistance

(2017) Zhenglong Fang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Cooling performance of micro-texture at the tool flank face under high pressure jet coolant assistance

(2017) Zhenglong Fang et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Effect of coating layer loss on the wear rate change of coated carbide tools in turning process

(2017) Israel Martinez et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Development of a novel cubic boron nitride cutting tool with a textured flank face for high-speed machining of Inconel 718

(2017) Tatsuya Sugihara et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Tool life and wear mechanism analysis of carbide tools used in the machining of martensitic and supermartensitic stainless steels

(2017) Janaina Geisler Corrêa et al.   TRIBOLOGY INTERNATIONAL

Tribological properties of ZnO and WS 2 nanofluids using different surfactants

(2017) Jingxuan Guo et al.   WEAR

Study on growth behaviour of oxide scale and its effects on tribological property of nano-TiO 2 additive oil-in-water lubricant

(2017) Wenzhen Xia et al.   WEAR

Hybrid lubricating/cooling strategies to reduce the tool wear in finishing turning of difficult-to-cut alloys

(2017) S. Sartori et al.   WEAR

New method for calculating face gear tooth surface involving worm wheel installation errors

(2017) Wei Cui et al.   Journal of Central South University

Flank wear characteristics of WC-Co tools when turning Alloy 718 with high-pressure coolant supply

(2017) Philipp Hoier et al.   Journal of Manufacturing Processes

A comparative study of recent lubri-coolant strategies for turning of Ni-based superalloy

(2017) Bikash Chandra Behera et al.   Journal of Manufacturing Processes

Tool wear on nickel alloys with different coolant pressures: Comparison of Alloy 718 and Waspaloy

(2017) R. Polvorosa et al.   Journal of Manufacturing Processes

A comprehensive study on the effects of tool wear on surface roughness, dimensional integrity and residual stress in turning IN718 hard-to-machine alloy

(2017) Farbod Akhavan Niaki et al.   Journal of Manufacturing Processes

Wear behavior of PVD TiN coated carbide inserts during machining of Nimonic 90 and Ti6Al4V superalloys under dry and MQL conditions

(2016) Chetan et al.   CERAMICS INTERNATIONAL

State-of-the-art in surface integrity in machining of nickel-based super alloys

(2016) A. Thakur et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Performance of water-based TiO 2 nanofluid during the minimum quantity lubrication machining of aluminium alloy, AA6061-T6

(2016) M.S. Najiha et al.   JOURNAL OF CLEANER PRODUCTION

Optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques

(2016) Munish Kumar Gupta et al.   JOURNAL OF CLEANER PRODUCTION

Analysis of cutting parameters and cooling/lubrication methods for sustainable machining in turning of Haynes 25 superalloy

(2016) Murat Sarıkaya et al.   JOURNAL OF CLEANER PRODUCTION

Application of nanofluids during minimum quantity lubrication: A case study in turning process

(2016) Chetan et al.   TRIBOLOGY INTERNATIONAL

Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel

(2016) R. Padmini et al.   TRIBOLOGY INTERNATIONAL

Simulation and experiment analysis on thermal deformation of tool system in single-point diamond turning of aluminum alloy

(2016) Yuan-jing Zhang et al.   Journal of Central South University

Improving energy utilization efficiency of electrical discharge milling in titanium alloys machining

(2016) Cheng-bo Guo et al.   Journal of Central South University

Load-induced error identification of hydrostatic turntable and its influence on machining accuracy

(2016) Qiang Cheng et al.   Journal of Central South University

The effect of aCN/TiAlN coating on tool wear, cutting force, surface finish and chip morphology in face milling of Ti6Al4V superalloy

(2015) Halil Çalışkan et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Application of liquid nitrogen and spray mode of biodegradable vegetable cutting fluid with compressed air in order to reduce cutting fluid consumption in turning Inconel 740

(2015) Ahmadreza Hosseini Tazehkandi et al.   JOURNAL OF CLEANER PRODUCTION

Tool wear mechanisms and multi-response optimization of tool life and volume of material removed in turning of N-155 iron–nickel-base superalloy using RSM

(2015) Behnam Davoodi et al.   MEASUREMENT

Comparison of TiN-coated tools using CVD and PVD processes during continuous cutting of Ni-based superalloys

(2015) Shuho Koseki et al.   SURFACE & COATINGS TECHNOLOGY

Analysis of tool wear in cryogenic machining of additive manufactured Ti6Al4V alloy

(2015) A. Bordin et al.   WEAR

Experimental investigation on removing cutting fluid from turning of Inconel 725 with coated carbide tools

(2014) Ahmadreza Hosseini Tazehkandi et al.   JOURNAL OF CLEANER PRODUCTION

Wear performance of (nc-AlTiN)/(a-Si3N4) coating and (nc-AlCrN)/(a-Si3N4) coating in high-speed machining of titanium alloys under dry and minimum quantity lubrication (MQL) conditions

(2013) Zhiqiang Liu et al.   WEAR

Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids

(2012) A. Shokrani et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions

(2012) S. Zhang et al.   JOURNAL OF CLEANER PRODUCTION

Analysis of the evolution of the Built-Up Edge and Built-Up Layer formation mechanisms in the dry turning of aeronautical aluminium alloys

(2012) A. Gómez-Parra et al.   WEAR

Analysis of tool wear patterns in finishing turning of Inconel 718

(2012) J.L. Cantero et al.   WEAR

Tool life and wear mechanism of coated and uncoated Al2O3/TiCN mixed ceramic tools in turning hardened alloy steel

(2011) K. Aslantas et al.   WEAR

Machining induced surface integrity in titanium and nickel alloys: A review

(2010) Durul Ulutan et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE