Room Temperature Processed Highly Efficient Large‐Area Polymer Solar Cells Achieved with Molecular Engineering of Copolymers

P3HT: non-fullerene acceptor based large area, semi-transparent PV modules with power conversion efficiencies of 5%, processed by industrially scalable methods

(2018) S. Strohm et al.   Energy & Environmental Science

Efficient Non-Fullerene Organic Photovoltaic Modules Incorporating As-Cast and Thickness-Insensitive Photoactive Layers

(2018) Tong Zhang et al.   Advanced Energy Materials

The Critical Impact of Material and Process Compatibility on the Active Layer Morphology and Performance of Organic Ternary Solar Cells

(2018) Joo-Hyun Kim et al.   Advanced Energy Materials

In-line, roll-to-roll morphology analysis of organic solar cell active layers

(2017) Lea Hildebrandt Rossander et al.   Energy & Environmental Science

Thienothiophene-based copolymers for high-performance solar cells, employing different orientations of the thiazole group as a π bridge

(2017) Dangqiang Zhu et al.   Energy & Environmental Science

High-efficiency photovoltaic cells with wide optical band gap polymers based on fluorinated phenylene-alkoxybenzothiadiazole

(2017) Seo-Jin Ko et al.   Energy & Environmental Science

Highly efficient halogen-free solvent processed small-molecule organic solar cells enabled by material design and device engineering

(2017) Jiahui Wan et al.   Energy & Environmental Science

Highly crystalline low-bandgap polymer nanowires towards high-performance thick-film organic solar cells exceeding 10% power conversion efficiency

(2017) Jaewon Lee et al.   Energy & Environmental Science

Thiophene-benzothiadiazole based D–A1–D–A2 type alternating copolymers for polymer solar cells

(2017) Gururaj P. Kini et al.   Polymer Chemistry

Enhancing Performance of Large-Area Organic Solar Cells with Thick Film via Ternary Strategy

(2017) Jianqi Zhang et al.   Small

Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor-acceptor demixing

(2017) Ning Li et al.   Nature Communications

Densely Packed Random Quarterpolymers Containing Two Donor and Two Acceptor Units: Controlling Absorption Ability and Molecular Interaction to Enable Enhanced Polymer Photovoltaic Devices

(2017) So-Huei Kang et al.   Advanced Energy Materials

High-Performance and Uniform 1 cm2 Polymer Solar Cells with D1 -A-D2 -A-Type Random Terpolymers

(2017) Injeong Shin et al.   Advanced Energy Materials

A Facile Method to Fine-Tune Polymer Aggregation Properties and Blend Morphology of Polymer Solar Cells Using Donor Polymers with Randomly Distributed Alkyl Chains

(2017) Huatong Yao et al.   Advanced Energy Materials

Eco-Friendly Solvent-Processed Fullerene-Free Polymer Solar Cells with over 9.7% Efficiency and Long-Term Performance Stability

(2017) Gi Eun Park et al.   Advanced Energy Materials

Thick Film Polymer Solar Cells Based on Naphtho[1,2-c :5,6-c ]bis[1,2,5]thiadiazole Conjugated Polymers with Efficiency over 11%

(2017) Yaocheng Jin et al.   Advanced Energy Materials

Conjugated Polymers Based on Difluorobenzoxadiazole toward Practical Application of Polymer Solar Cells

(2017) Junyi Wang et al.   Advanced Energy Materials

Feasible D1-A-D2-A Random Copolymers for Simultaneous High-Performance Fullerene and Nonfullerene Solar Cells

(2017) Mingyu Jeong et al.   Advanced Energy Materials

Roll-to-Roll Printed Large-Area All-Polymer Solar Cells with 5% Efficiency Based on a Low Crystallinity Conjugated Polymer Blend

(2017) Xiaodan Gu et al.   Advanced Energy Materials

Effects of morphology evolution on solution-processed small molecule photovoltaics via a solvent additive

(2017) Quoc Viet Hoang et al.   Journal of Materials Chemistry C

Non-halogenated solvent-processed single-junction polymer solar cells with 9.91% efficiency and improved photostability

(2017) Xunfan Liao et al.   Nano Energy

Room temperature processed polymers for high-efficient polymer solar cells with power conversion efficiency over 9%

(2017) Xunfan Liao et al.   Nano Energy

High-Performance Photovoltaic Polymers Employing Symmetry-Breaking Building Blocks

(2016) Deyu Liu et al.   ADVANCED MATERIALS

Molecular Lock: A Versatile Key to Enhance Efficiency and Stability of Organic Solar Cells

(2016) Pei Cheng et al.   ADVANCED MATERIALS

A Novel Naphtho[1,2-c:5,6-c′]Bis([1,2,5]Thiadiazole)-Based Narrow-Bandgap π-Conjugated Polymer with Power Conversion Efficiency Over 10%

(2016) Yaocheng Jin et al.   ADVANCED MATERIALS

Head-to-Head Linkage Containing Bithiophene-Based Polymeric Semiconductors for Highly Efficient Polymer Solar Cells

(2016) Shengbin Shi et al.   ADVANCED MATERIALS

Morphology changes upon scaling a high-efficiency, solution-processed solar cell

(2016) Hyun Wook Ro et al.   Energy & Environmental Science

Toward Practical Useful Polymers for Highly Efficient Solar Cells via a Random Copolymer Approach

(2016) Chunhui Duan et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Implication of Fluorine Atom on Electronic Properties, Ordering Structures, and Photovoltaic Performance in Naphthobisthiadiazole-Based Semiconducting Polymers

(2016) Kazuaki Kawashima et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing

(2016) Zhaojun Li et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

A series connection architecture for large-area organic photovoltaic modules with a 7.5% module efficiency

(2016) Soonil Hong et al.   Nature Communications

Overcoming the Thermal Instability of Efficient Polymer Solar Cells by Employing Novel Fullerene-Based Acceptors

(2016) Chaohong Zhang et al.   Advanced Energy Materials

High-Performance Small Molecule via Tailoring Intermolecular Interactions and its Application in Large-Area Organic Photovoltaic Modules

(2016) Sachin Badgujar et al.   Advanced Energy Materials

Achieving a solar power conversion efficiency exceeding 9% by modifying the structure of a simple, inexpensive and highly scalable polymer

(2016) Gururaj P. Kini et al.   Journal of Materials Chemistry A

Critical factors governing vertical phase separation in polymer–PCBM blend films for organic solar cells

(2016) Min Kim et al.   Journal of Materials Chemistry A

Efficient organic solar cells processed from hydrocarbon solvents

(2016) Jingbo Zhao et al.   Nature Energy

A Difluorobenzoxadiazole Building Block for Efficient Polymer Solar Cells

(2015) Jingbo Zhao et al.   ADVANCED MATERIALS

Asymmetric Electron-Donating 4-Alkyl-8-alkoxybenzo[1,2-b:4,5-b′]dithiophene Unit for Use in High-Efficiency Bulk Heterojunction Polymer Solar Cells

(2015) Quoc Viet Hoang et al.   MACROMOLECULES

Efficient inverted polymer solar cells employing favourable molecular orientation

(2015) Varun Vohra et al.   Nature Photonics

Band gap tunable benzodithiophene-based donor-rich semi-random D–A copolymers with active layer thickness tolerance for organic solar cells

(2015) Thi Thu Trang Bui et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Efficient Low-Bandgap Polymer Solar Cells with High Open-Circuit Voltage and Good Stability

(2015) Tingxuan Ma et al.   Advanced Energy Materials

Influence of Processing Parameters and Molecular Weight on the Morphology and Properties of High-Performance PffBT4T-2OD:PC71BM Organic Solar Cells

(2015) Wei Ma et al.   Advanced Energy Materials

Highly Efficient and Stable Solar Cells Based on Thiazolothiazole and Naphthobisthiadiazole Copolymers

(2015) Masahiko Saito et al.   Scientific Reports

Competitive Absorption and Inefficient Exciton Harvesting: Lessons Learned from Bulk Heterojunction Organic Photovoltaics Utilizing the Polymer Acceptor P(NDI2OD-T2)

(2014) Zhi Li et al.   ADVANCED FUNCTIONAL MATERIALS

Thermal Stabilisation of Polymer-Fullerene Bulk Heterojunction Morphology for Efficient Photovoltaic Solar Cells

(2014) Lionel Derue et al.   ADVANCED MATERIALS

High-Efficiency All-Polymer Solar Cells Based on a Pair of Crystalline Low-Bandgap Polymers

(2014) Cheng Mu et al.   ADVANCED MATERIALS

Bulk Heterojunction Solar Cells: Morphology and Performance Relationships

(2014) Ye Huang et al.   CHEMICAL REVIEWS

Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell device

(2014) T. L. Nguyen et al.   Energy & Environmental Science

Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells

(2014) Yuhang Liu et al.   Nature Communications

Film Morphology of High Efficiency Solution-Processed Small-Molecule Solar Cells

(2013) John A. Love et al.   ADVANCED FUNCTIONAL MATERIALS

Naphthodithiophene–Naphthobisthiadiazole Copolymers for Solar Cells: Alkylation Drives the Polymer Backbone Flat and Promotes Efficiency

(2013) Itaru Osaka et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Roll-to-Roll fabrication of large area functional organic materials

(2012) Roar R. Søndergaard et al.   JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS

Morphological Stabilization by In Situ Polymerization of Fullerene Derivatives Leading to Efficient, Thermally Stable Organic Photovoltaics

(2011) Yen-Ju Cheng et al.   ADVANCED FUNCTIONAL MATERIALS

Molecular Design and Ordering Effects in π-Functional Materials for Transistor and Solar Cell Applications

(2011) Pierre M. Beaujuge et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Donor–Acceptor Conjugated Polymer Based on Naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for High-Performance Polymer Solar Cells

(2011) Ming Wang et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Consensus stability testing protocols for organic photovoltaic materials and devices

(2011) Matthew O. Reese et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Gold nanoparticle-templated assembly of oligothiophenes: preparation and film properties

(2011) Ken-ichi Saitou et al.   TETRAHEDRON