Fabrication of ODS Austenitic Steels and CoCrFeNi High-Entropy Alloys by Spark Plasma Sintering for Nuclear Energy Applications

Transmission electron microscopy characterization of dislocation structure in a face-centered cubic high-entropy alloy Al 0.1 CoCrFeNi

(2018) X.D. Xu et al.   ACTA MATERIALIA

(Hf0.2 Zr0.2 Ta0.2 Nb0.2 Ti0.2 )C high-entropy ceramics with low thermal conductivity

(2018) Xueliang Yan et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Microstructural stability of an as-fabricated 12Cr-ODS steel under elevated-temperature annealing

(2017) Jingjie Shen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Structure and properties of ultrafine-grained CoCrFeMnNi high-entropy alloys produced by mechanical alloying and spark plasma sintering

(2017) S.-H. Joo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Production, microstructure and mechanical properties of two different austenitic ODS steels

(2017) T. Gräning et al.   JOURNAL OF NUCLEAR MATERIALS

Flow behavior and microstructures of powder metallurgical CrFeCoNiMo0.2 high entropy alloy during high temperature deformation

(2017) Jiawen Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals

(2017) Evan Ma et al.   Materials Today

Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy

(2017) Y. H. Jo et al.   Nature Communications

Microstructure and mechanical properties of Ni1,5Co1,5CrFeTi0,5 high entropy alloy fabricated by mechanical alloying and spark plasma sintering

(2017) Igor Moravcik et al.   MATERIALS & DESIGN

Enhanced Radiation-tolerant Oxide Dispersion Strengthened Steel and its Microstructure Evolution under Helium-implantation and Heavy-ion Irradiation

(2017) Chenyang Lu et al.   Scientific Reports

Sol-gel Autocombustion Synthesis of Nanocrystalline High-entropy Alloys

(2017) Bo Niu et al.   Scientific Reports

Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co 25 Ni 25 Fe 25 Al 7.5 Cu 17.5 high-entropy alloy

(2016) Zhiqiang Fu et al.   ACTA MATERIALIA

Microstructural stability and mechanical behavior of FeNiMnCr high entropy alloy under ion irradiation

(2016) N.A.P. Kiran Kumar et al.   ACTA MATERIALIA

Investigation of spark plasma sintered oxide-dispersion strengthened steels by means of small-angle neutron scattering

(2016) I. Hilger et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication and characterization of oxide dispersion strengthened (ODS) 14Cr steels consolidated by means of hot isostatic pressing, hot extrusion and spark plasma sintering

(2016) I. Hilger et al.   JOURNAL OF NUCLEAR MATERIALS

Size-dependent characteristics of ultra-fine oxygen-enriched nanoparticles in austenitic steels

(2016) Yinbin Miao et al.   JOURNAL OF NUCLEAR MATERIALS

Rapid preparation of AlCoCrFeNi high entropy alloy by spark plasma sintering from elemental powder mixture

(2016) Aijun Zhang et al.   MATERIALS LETTERS

Effect of spark plasma sintering temperature on microstructure and mechanical properties of 14Cr-ODS ferritic steels

(2016) Zhengyuan Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys

(2016) Chuan Zhang et al.   MATERIALS & DESIGN

Processing, alloy composition and phase transition effect on the mechanical and corrosion properties of high entropy alloys: a review

(2016) Kenneth Kanayo Alaneme et al.   Journal of Materials Research and Technology-JMR&T

Atom probe study of irradiation-enhanced α′ precipitation in neutron-irradiated Fe–Cr model alloys

(2015) Wei-Ying Chen et al.   JOURNAL OF NUCLEAR MATERIALS

The interfacial orientation relationship of oxide nanoparticles in a hafnium-containing oxide dispersion-strengthened austenitic stainless steel

(2015) Yinbin Miao et al.   MATERIALS CHARACTERIZATION

Microstructures and mechanical properties of compositionally complex Co-free FeNiMnCr 18 FCC solid solution alloy

(2015) Z. Wu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi

(2015) ZiJiao Zhang et al.   Nature Communications

Influence of chemical disorder on energy dissipation and defect evolution in concentrated solid solution alloys

(2015) Yanwen Zhang et al.   Nature Communications

Field-Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments

(2014) Olivier Guillon et al.   ADVANCED ENGINEERING MATERIALS

Synchrotron study on load partitioning between ferrite/martensite and nanoparticles of a 9Cr ODS steel

(2014) Kun Mo et al.   JOURNAL OF NUCLEAR MATERIALS

The formation and evolution of oxide particles in oxide-dispersion-strengthened ferritic steels during processing

(2013) Ceri A. Williams et al.   ACTA MATERIALIA

Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys

(2013) K.-Y. Tsai et al.   ACTA MATERIALIA

Materials challenges in nuclear energy

(2013) S.J. Zinkle et al.   ACTA MATERIALIA

Spark Plasma Sintering: Homogenization of the Compact Temperature Field for Non Conductive Materials

(2013) Thierry Vanherck et al.   International Journal of Applied Ceramic Technology

Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures

(2013) Woei-Ren Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical behavior of ODS and non-ODS Fe–14Cr model alloys produced by spark plasma sintering

(2013) M.A. Auger et al.   JOURNAL OF NUCLEAR MATERIALS

Morphology of oxide particles in ODS austenitic stainless steel

(2013) Hiroshi Oka et al.   JOURNAL OF NUCLEAR MATERIALS

High-Temperature Tensile Properties of Nano-Oxide Dispersion Strengthened Ferritic Steels Produced by Mechanical Alloying and Spark Plasma Sintering

(2013) Xavier Boulnat et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys

(2012) M.A. Hemphill et al.   ACTA MATERIALIA

Fabrication and properties of nanocrystalline Co0.5FeNiCrTi0.5 high entropy alloy by MA–SPS technique

(2012) Zhiqiang Fu et al.   MATERIALS & DESIGN

Microstructural evolution during high-temperature oxidation of spark plasma sintered Ti2AlN ceramics

(2011) Bai Cui et al.   ACTA MATERIALIA

Comparison of ZrB2–SiC ceramics with Yb2O3 additive prepared by hot pressing and spark plasma sintering

(2011) Wei-Ming Guo et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Preparation and structural investigation of nanostructured oxide dispersed strengthened steels

(2011) Cs. Balázsi et al.   JOURNAL OF MATERIALS SCIENCE

Pressure effects and grain growth kinetics in the consolidation of nanostructured fully stabilized zirconia by pulsed electric current sintering

(2010) Dat V. Quach et al.   ACTA MATERIALIA

Fabrication and characterization of ODS austenitic steels

(2010) Yingli Xu et al.   JOURNAL OF NUCLEAR MATERIALS

Nanoscale characterization and formation mechanism of nanoclusters in an ODS steel elaborated by reactive-inspired ball-milling and annealing

(2010) M. Brocq et al.   JOURNAL OF NUCLEAR MATERIALS

Formation mechanism and the role of nanoparticles in Fe-Cr ODS steels developed for radiation tolerance

(2010) Luke L. Hsiung et al.   PHYSICAL REVIEW B

Mechanical properties of Y2Ti2O7

(2010) L.F. He et al.   SCRIPTA MATERIALIA

Characterization of nanocrystalline CoCrFeNiTiAl high-entropy solid solution processed by mechanical alloying

(2009) K.B. Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A discussion on the absence of plasma in spark plasma sintering

(2009) Dustin M. Hulbert et al.   SCRIPTA MATERIALIA

On the role of alloy composition and processing parameters in nanocluster formation and dispersion strengthening in nanostuctured ferritic alloys

(2008) M.J. Alinger et al.   ACTA MATERIALIA

The absence of plasma in “spark plasma sintering”

(2008) Dustin M. Hulbert et al.   JOURNAL OF APPLIED PHYSICS

Impact of Thermal Diffusion on Densification During SPS

(2008) Eugene A. Olevsky et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY