Materials for Hip Prostheses: A Review of Wear and Loading Considerations
Published 2019 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Materials for Hip Prostheses: A Review of Wear and Loading Considerations
Authors
Keywords
-
Journal
Materials
Volume 12, Issue 3, Pages 495
Publisher
MDPI AG
Online
2019-02-06
DOI
10.3390/ma12030495
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Systemic and local toxicity of metal debris released from hip prostheses: A review of experimental approaches
- (2018) Divya Rani Bijukumar et al. Nanomedicine-Nanotechnology Biology and Medicine
- Comparison of wear rate and osteolysis between second-generation annealed and first-generation remelted highly cross-linked polyethylene in total hip arthroplasty. A case control study at a minimum of five years
- (2017) R. Takada et al. Orthopaedics & Traumatology-Surgery & Research
- Registry data show increase in joint replacement surgery
- (2017) Susan Mayor BMJ-British Medical Journal
- Registry data show increase in joint replacement surgery
- (2017) Susan Mayor BMJ-British Medical Journal
- Validation of a protocol based on Raman and infrared spectroscopies to nondestructively estimate the oxidative degradation of UHMWPE used in total joint arthroplasty
- (2016) Leonardo Puppulin et al. Acta Biomaterialia
- Corrosion-wear of β-Ti alloy TMZF (Ti-12Mo-6Zr-2Fe) in simulated body fluid
- (2016) Xueyuan Yang et al. Acta Biomaterialia
- Hip Squeaking after Ceramic-on-ceramic Total Hip Arthroplasty
- (2016) Xi-Sheng Weng et al. CHINESE MEDICAL JOURNAL
- Influence of PEEK Coating on Hip Implant Stress Shielding: A Finite Element Analysis
- (2016) Jesica Anguiano-Sanchez et al. Computational and Mathematical Methods in Medicine
- Alumina Delta-on-Highly Crosslinked-Remelted Polyethylene Bearing in Cementless Total Hip Arthroplasty in Patients Younger than 50 Years
- (2016) Young-Hoo Kim et al. JOURNAL OF ARTHROPLASTY
- Wear of composite ceramics in mixed-material combinations in total hip replacement under adverse edge loading conditions
- (2016) Mazen Al-Hajjar et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Wear performance of neat and vitamin E blended highly cross-linked PE under severe conditions: The combined effect of accelerated ageing and third body particles during wear test
- (2016) Saverio Affatato et al. Journal of the Mechanical Behavior of Biomedical Materials
- Influence of contact pressure, cross-shear and counterface material on the wear of PEEK and CFR-PEEK for orthopaedic applications
- (2016) C.L. Brockett et al. Journal of the Mechanical Behavior of Biomedical Materials
- PEEK-OPTIMA™ as an alternative to cobalt chrome in the femoral component of total knee replacement: A preliminary study
- (2016) Raelene M Cowie et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
- Advanced biomaterials in hip joint arthroplasty. A review on polymer and ceramics composites as alternative bearings
- (2015) Saverio Affatato et al. COMPOSITES PART B-ENGINEERING
- The Divergence of Wear Propagation and Stress at Steep Acetabular Cup Positions Using Ceramic Heads and Sequentially Cross-Linked Polyethylene Liners
- (2015) Carmen Zietz et al. JOURNAL OF ARTHROPLASTY
- Wear resistance of the biocompatible phospholipid polymer-grafted highly cross-linked polyethylene liner against larger femoral head
- (2015) Toru Moro et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Comparison of ceramic-on-ceramic to metal-on-polyethylene bearing surfaces in total hip arthroplasty: a meta-analysis of randomized controlled trials
- (2015) Dongcai Hu et al. Journal of Orthopaedic Surgery and Research
- Biotribology of a vitamin E-stabilized polyethylene for hip arthroplasty – Influence of artificial ageing and third-body particles on wear
- (2014) Thomas M. Grupp et al. Acta Biomaterialia
- Crosslink density, oxidation and chain scission in retrieved, highly cross-linked UHMWPE tibial bearings
- (2014) Steven D. Reinitz et al. BIOMATERIALS
- Edge loading does not increase wear rates of ceramic-on-ceramic and metal-on-polyethylene articulations
- (2014) Jelle J. Halma et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Finite element analysis of the tetragonal to monoclinic phase transformation during oxidation of zirconium alloys
- (2014) P. Platt et al. JOURNAL OF NUCLEAR MATERIALS
- Wear testing of crosslinked polyethylene: Wear rate variability and microbial contamination
- (2014) J.-M. Brandt et al. Journal of the Mechanical Behavior of Biomedical Materials
- Metal-on-metal vs. metal-on-polyethylene total hip arthroplasty tribological evaluation of retrieved components and periprosthetic tissue
- (2014) Matevž Topolovec et al. Journal of the Mechanical Behavior of Biomedical Materials
- Combining ageing and wear to assess the durability of zirconia-based ceramic heads for total hip arthroplasty
- (2013) L. Gremillard et al. Acta Biomaterialia
- Cumulative Revision Rate is Higher in Metal-on-Metal THA than Metal-on-Polyethylene THA: Analysis of Survival in a Community Registry
- (2013) Der-Chen T. Huang et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Smith–Petersen and early development of hip arthroplasty
- (2013) Philippe Hernigou INTERNATIONAL ORTHOPAEDICS
- Comparison of ceramic-on-metal and metal-on-metal hip prostheses under adverse conditions
- (2013) Sophie Williams et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Wear of novel ceramic-on-ceramic bearings under adverse and clinically relevant hip simulator conditions
- (2013) Mazen Al-Hajjar et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Wear Performance of Ceramic-On-Metal Hip Bearings
- (2013) Jörn Reinders et al. PLoS One
- Wear of 36-mm BIOLOX® delta ceramic-on-ceramic bearing in total hip replacements under edge loading conditions
- (2013) Mazen Al-Hajjar et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
- Retrieval analysis of three generations of Biolox® femoral heads: Spectroscopic and SEM characterisation
- (2012) S. Affatato et al. Journal of the Mechanical Behavior of Biomedical Materials
- Edge loading in metal-on-metal hips: low clearance is a new risk factor
- (2012) Richard J Underwood et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
- Influence of assembly procedure and material combination on the strength of the taper connection at the head–neck junction of modular hip endoprostheses
- (2011) Annelie Rehmer et al. CLINICAL BIOMECHANICS
- Second-generation Annealed Highly Cross-linked Polyethylene Exhibits Low Wear
- (2011) James A. D’Antonio et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Carbon composition effects on wear behaviour and wear mechanisms of metal-on-metal hip prosthesis
- (2011) R. Ihaddadene et al. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING
- Wear of Metal-on-Metal Hip Bearings: Metallurgical Considerations after Hip Simulator Studies
- (2011) Saverio Affatato et al. INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS
- Metal-on-metal: history, state of the art (2010)
- (2011) Philippe Triclot INTERNATIONAL ORTHOPAEDICS
- Metal-on-Metal vs Metal-on-Improved Polyethylene Bearings in Total Hip Arthroplasty
- (2011) Ryan G. Molli et al. JOURNAL OF ARTHROPLASTY
- The elimination of free radicals in irradiated UHMWPEs with and without vitamin E stabilization by annealing under pressure
- (2011) Ebru Oral et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Biotribology of alternative bearing materials for unicompartmental knee arthroplasty
- (2010) Thomas M. Grupp et al. Acta Biomaterialia
- Ceramic-On-Metal for Total Hip Replacement: Mixing and Matching Can Lead to High Wear
- (2010) Saverio Affatato et al. ARTIFICIAL ORGANS
- Vitamin E-stabilized UHMWPE for Total Joint Implants: A Review
- (2010) Pierangiola Bracco et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Ex Vivo Stability Loss of Irradiated and Melted Ultra-High Molecular Weight Polyethylene
- (2010) Orhun K Muratoglu et al. JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME
- Early failure of metal-on-metal bearings in hip resurfacing and large-diameter total hip replacement
- (2010) D. J. Langton et al. JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME
- Reliability assessment in advanced nanocomposite materials for orthopaedic applications
- (2010) Jérôme Chevalier et al. Journal of the Mechanical Behavior of Biomedical Materials
- Metal-on-metal bearings total hip arthroplasty: The cobalt and chromium ions release concern
- (2010) C. Delaunay et al. Orthopaedics & Traumatology-Surgery & Research
- Mixing and matching in ceramic-on-metal hip arthroplasty: An in-vitro hip simulator study
- (2009) Saverio Affatato et al. JOURNAL OF BIOMECHANICS
- Is ceramic-on-ceramic squeaking phenomenon reproduciblein vitro? A long-term simulator study under severe conditions
- (2009) S. Affatato et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- The Epidemiology of Revision Total Hip Arthroplasty in the United States
- (2009) Kevin J Bozic et al. JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME
- Wear Performance of Large-Diameter Differential-Hardness Hip Bearings
- (2008) C. Lowry Barnes et al. JOURNAL OF ARTHROPLASTY
- Ultra high molecular weight polyethylene: Mechanics, morphology, and clinical behavior
- (2008) M.C. Sobieraj et al. Journal of the Mechanical Behavior of Biomedical Materials
- Free radical elimination in irradiated UHMWPE through crystal mobility in phase transition to the hexagonal phase
- (2008) Ebru Oral et al. POLYMER
- Influence of contaminants in the stem—ball interface on the static fracture load of ceramic hip joint ball heads
- (2008) B Weisse et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
- Stabilized zirconia as a structural ceramic: An overview☆
- (2007) J KELLY et al. DENTAL MATERIALS
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started