Microstructure and Mechanical Properties of Ti-6Al-4V Rods Fabricated by Powder Compact Extrusion of TiH2/Al60V40 Powder Blend

Solution treatment of Ti-6Al-4V alloy produced by consolidating blended powder mixture using a powder compact extrusion route

(2018) Ajit Pal Singh et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A Processing Route for Achieving Isotropic Tensile Properties in Laser Solid Formed α+β Titanium Alloy

(2018) Qiang Zhang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effects of the extrusion temperature on the microstructure and mechanical properties of TiBw/Ti6Al4V composites fabricated by pre-sintering and canned extrusion

(2017) Yangju Feng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Feasibility of producing Ti-6Al-4V alloy for engineering application by powder compact extrusion of blended elemental powder mixtures

(2017) Fei Yang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Rapid synthesis of dense NiTi alloy through spark plasma sintering of a TiH2/Ni powder mixture

(2017) Bolu Liu et al.   MATERIALS LETTERS

Porosity, Microstructure, and Mechanical Properties of Ti-6Al-4V Alloy Parts Fabricated by Powder Compact Forging

(2017) Mingtu Jia et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

New approach to achieve high strength powder metallurgy Ti-6Al-4V alloy through accelerated sintering at β-transus temperature and hydrogenation-dehydrogenation treatment

(2017) Fei Cao et al.   SCRIPTA MATERIALIA

Preparation of strong and ductile pure titanium via two-step rapid sintering of TiH 2 powder

(2016) Bhupendra Sharma et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructures and Tensile Mechanical Properties of Titanium Rods Made by Powder Compact Extrusion of a Titanium Hydride Powder

(2016) Yifeng Zheng et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

New Powder Metallurgical Approach to Achieve High Fatigue Strength in Ti-6Al-4V Alloy

(2016) Fei Cao et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

The Tensile Mechanical Properties of Thermomechanically Consolidated Titanium at Different Strain Rates

(2015) Cun Liang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Microstructural evolution during extrusion of a Ti/Al/Al35V65 (Ti–6Al–4V) powder compact and the mechanical properties of the extruded rod

(2014) Fei Yang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructures and tensile mechanical properties of Ti–6Al–4V bar/disk fabricated by powder compact extrusion/forging

(2014) C. Liang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Perspectives on Titanium Science and Technology

(2013) Dipankar Banerjee et al.   ACTA MATERIALIA

NiTi Powder Sintering from TiH2 Powder: An In Situ Investigation

(2013) Gang Chen et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Novel fabrication of titanium by pure microwave radiation of titanium hydride powder

(2013) S.D. Luo et al.   SCRIPTA MATERIALIA

Hydrogen Sintering of Titanium to Produce High Density Fine Grain Titanium Alloys

(2012) Zhigang Zak Fang et al.   ADVANCED ENGINEERING MATERIALS

Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties

(2012) Bey Vrancken et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of extrusion and heat treatment on the microstructure and tensile properties of in situ TiBw/Ti6Al4V composite with a network architecture

(2011) L.J. Huang et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Titanium alloy production technology, market prospects and industry development

(2010) Chunxiang Cui et al.   MATERIALS & DESIGN

Powder sintering of porous Ti–15Mo alloy from TiH2 and Mo powders

(2009) Yong-Hua Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties

(2009) Bernd Baufeld et al.   MATERIALS & DESIGN

The role of new particle surfaces in synthesizing bulk nanostructured metallic materials by powder metallurgy

(2009) D.L. Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural characteristics and mechanical properties of Ti–6Al–4V friction stir welds

(2007) Yu Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING