Anisotropy in mechanical properties and corrosion resistance of 316L stainless steel fabricated by selective laser melting
Published 2019 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Anisotropy in mechanical properties and corrosion resistance of 316L stainless steel fabricated by selective laser melting
Authors
Keywords
selective laser melting, mechanical property, corrosion resistance, 316L stainless steel, anisotropy, molten pool boundary
Journal
International Journal of Minerals Metallurgy and Materials
Volume 26, Issue 3, Pages 319-328
Publisher
Springer Nature
Online
2019-03-08
DOI
10.1007/s12613-019-1740-x
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Surface monitoring for pitting evolution into uniform corrosion on Cu-Ni-Zn ternary alloy in alkaline chloride solution: ex-situ LCM and in-situ SECM
- (2018) Decheng Kong et al. APPLIED SURFACE SCIENCE
- Insight into the mechanism of alloying elements (Sn, Be) effect on copper corrosion during long-term degradation in harsh marine environment
- (2018) Decheng Kong et al. APPLIED SURFACE SCIENCE
- The Combined Effect of Chemical and Structural Factors on Pitting Corrosion Induced by MnS-(Cr, Mn, Al)O Duplex Inclusions
- (2018) Cheng Man et al. CORROSION
- Electrochemical behaviour of martensitic stainless steel after immersion in a H 2 S-saturated solution
- (2018) Xiaowei Lei et al. CORROSION SCIENCE
- Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells
- (2018) Decheng Kong et al. ELECTROCHIMICA ACTA
- Wear and corrosion resistance of laser-cladded Fe-based composite coatings on AISI 4130 steel
- (2018) Li Fan et al. International Journal of Minerals Metallurgy and Materials
- Distinction of corrosion resistance of selective laser melted Al-12Si alloy on different planes
- (2018) Yang Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Corrosion Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting Under Different Scanning Speeds
- (2018) Xiaoqing Ni et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- The Role of Microstructure and Surface Finish on the Corrosion of Selective Laser Melted 304L
- (2018) Rebecca F. Schaller et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- The Combined Effect of Chemical and Structural Factors on Pitting Corrosion Induced by MnS-(Cr, Mn, Al)O Duplex Inclusions
- (2018) Cheng Man et al. CORROSION
- Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
- (2018) Y. Kok et al. MATERIALS & DESIGN
- Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting
- (2018) Decheng Kong et al. MATERIALS & DESIGN
- Additive manufactured bipolar plate for high-efficiency hydrogen production in proton exchange membrane electrolyzer cells
- (2017) Gaoqiang Yang et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Mechanical properties and microstructure of 3D-printed high Co–Ni secondary hardening steel fabricated by laser melting deposition
- (2017) Hui-ping Duan et al. International Journal of Minerals Metallurgy and Materials
- Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L stainless steel by high-power direct laser deposition
- (2017) Peng Guo et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On The Corrosion and Metastable Pitting Characteristics of 316L Stainless Steel Produced by Selective Laser Melting
- (2017) G. Sander et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Long-term polarisation and immersion for copper corrosion in high-level nuclear waste environment
- (2017) D. C. Kong et al. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
- Corrosion behavior of 316L austenitic steel processed by selective laser melting, hot-isostatic pressing, and casting
- (2017) K. Geenen et al. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
- On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel
- (2017) Qi Chao et al. SCRIPTA MATERIALIA
- Corrosion Properties of Powder Bed Fusion Additively Manufactured 17-4 PH Stainless Steel
- (2017) Rebecca F. Schaller et al. CORROSION
- Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties
- (2017) V.A. Popovich et al. MATERIALS & DESIGN
- Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes
- (2016) Nianwei Dai et al. CORROSION SCIENCE
- Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel
- (2016) Jason R. Trelewicz et al. JOM
- Long-Term Corrosion of Copper in Hot and Dry Atmosphere in Turpan, China
- (2016) D. C. Kong et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Passivity Breakdown on Copper: Influence of Temperature
- (2016) Chaofang Dong et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Comparison of microstructure and mechanical properties of 316 L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material
- (2016) Arne Röttger et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting
- (2016) G. Miranda et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of octadecylamine on the corrosion behavior of Type 316SS in acetate buffer
- (2015) Feixiong Mao et al. CORROSION SCIENCE
- Hardened austenite steel with columnar sub-grain structure formed by laser melting
- (2015) K. Saeidi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Materials science: Share corrosion data
- (2015) Xiaogang Li et al. NATURE
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Scanning electrochemical microscopy study on the electrochemical behavior of CrN film formed on 304 stainless steel by magnetron sputtering
- (2013) Shujun Gao et al. ELECTROCHIMICA ACTA
- Structural and mechanical characteristics of porous 316L stainless steel fabricated by indirect selective laser sintering
- (2013) Fangxia Xie et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds
- (2012) S. Van Bael et al. Acta Biomaterialia
- Mechanism of (Mg,Al,Ca)-oxide inclusion-induced pitting corrosion in 316L stainless steel exposed to sulphur environments containing chloride ion
- (2012) Shuqi Zheng et al. CORROSION SCIENCE
- Characterization of passive film on 2205 duplex stainless steel in sodium thiosulphate solution
- (2011) H. Luo et al. APPLIED SURFACE SCIENCE
- Effects of solution pH and Cl− on electrochemical behaviour of an Aermet100 ultra-high strength steel in acidic environments
- (2011) Y.B. Hu et al. CORROSION SCIENCE
- Microstructure and properties of laser direct deposited CuNi17Al3Fe1.5Cr alloy
- (2011) Yong-zhong Zhang et al. International Journal of Minerals Metallurgy and Materials
- The history of the Point Defect Model for the passive state: A brief review of film growth aspects
- (2010) Digby D. Macdonald ELECTROCHIMICA ACTA
- Effects of hydrogen-charging on the susceptibility of X100 pipeline steel to hydrogen-induced cracking
- (2009) C.F. Dong et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Hydrogen-induced cracking and healing behaviour of X70 steel
- (2009) C.F. Dong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Localized EIS characterization of corrosion of steel at coating defect under cathodic protection
- (2008) C.F. Dong et al. ELECTROCHIMICA ACTA
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now