4.3 Article

Recovery of Valuable Metals from Copper Smelter Slag by Sulfation Roasting

Journal

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
Volume 72, Issue 3, Pages 603-607

Publisher

SPRINGER INDIA
DOI: 10.1007/s12666-018-1507-5

Keywords

Copper smelter slag; Leaching; Roasting

Ask authors/readers for more resources

In the present paper, recovery of valuable metals from copper smelter slag of Balkhash copper plant (Kazakhstan) was investigated. To recover Fe, Zn and Cu to water-soluble form, the mixture of 150g of copper slag and 60g of 85% sulfuric acid was granulated and then roasted in the temperature range of 473-643K (200-370 degrees C) followed by sulfuric acid leaching. Once the roasting temperature and duration are, respectively, 643K (370 degrees C) and 150min, the recovery% values of metals to water-soluble form reaches, accordingly: Fe80.6, Zn88.7, Cu81.8. The resulting calcine was subjected to sulfuric acid leaching; after solid: liquid separation, a filtrate was obtained with the following composition, g/L: Fe(2+)0.60; Zn(2+)3.58; Cu(2+)1.03. On adding ammonia water into the filtrate, 98% of iron was selectively precipitated, thereby separating from zinc and copper.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.3
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

Article Chemistry, Physical

Synthesis and Photocatalytic Properties of Silver Chloride/Silver Composite Colloidal Particles

F. Kh. Urakaev, N. V. Khan, Zh. S. Shalabaev, B. B. Tatykaev, R. K. Nadirov, M. M. Burkitbaev

COLLOID JOURNAL (2020)

Article Engineering, Chemical

Ethylene-Vinyl Acetate Copolymer/Crude Gossypol Compositions as Pour Point Depressants for Waxy Oil

Bekaidar T. Marenov, Kazim S. Nadirov, Manap K. Zhantasov, Rashid K. Nadirov

INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING (2020)

Article Materials Science, Multidisciplinary

Selective room-temperature leaching of copper from mechanically activated copper smelter slag

Lyazzat Mussapyrova, Rashid Nadirov, Peter Balaz, Michal Rajnak, Radovan Bures, Matej Balaz

Summary: In this study, room-temperature sulfuric acid leaching of copper smelter slag powder in the presence of potassium dichromate was investigated to selectively extract copper from zinc and iron. Mechanical activation and the Taguchi method were used to enhance copper extraction efficiency. Optimal conditions were determined for both mechanical activation and leaching, leading to efficient recovery of valuable metals from secondary resources.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Metallurgy & Metallurgical Engineering

Dissolution of Chalcopyrite in Presence of Chelating Agent and Hydrogen Peroxide

M. Deniz Turan, J. Pedro Silva, Z. Abidin Sari, Rashid Nadirov, Norman Toro

Summary: Chelating agents and hydrogen peroxide are essential for metal extraction from chalcopyrite concentrate, with mechanical activation playing a key role in increasing extraction efficiency. Application of ultrasound enhances metal extraction efficiency in the leaching process.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2022)

Article Engineering, Chemical

Freshly Milled Quartz Particles Obtained from River Sand as an Efficient Natural Demulsifier for Crude Oil Emulsions

Kazim Nadirov, Manap Zhantasov, Zhanna Nadirova, Nurlybek Otarbaev, Gulmira Bimbetova, Rashid Nadirov

Summary: Saline water in crude oil forms stable water-in-oil emulsions, which can be broken and separated by adding special materials. This study found that freshly milled quartz particles can reduce emulsion stability and increase water adhesion, leading to improved demulsification.

PROCESSES (2022)

Article Metallurgy & Metallurgical Engineering

Enhancing Synthetic Zinc Ferrite Hydrochloric Acid Leaching by Using Isopropanol as a Solvent

Rashid Nadirov, Galymzhan Karamyrzayev

Summary: Zinc ferrite is a promising source of raw zinc, and acidic extraction using isopropanol is more efficient than aqueous extraction, achieving a dissolution rate of 77%.

MINING METALLURGY & EXPLORATION (2022)

Article Chemistry, Physical

Thermodynamic Simulation of Environmental and Population Protection by Utilization of Technogenic Tailings of Enrichment

Olga Kolesnikova, Samal Syrlybekkyzy, Roman Fediuk, Almas Yerzhanov, Rashid Nadirov, Akmaral Utelbayeva, Aktolkyn Agabekova, Marina Latypova, Larissa Chepelyan, Irina Volokitina, Nikolai Ivanovich Vatin, Alexandr Kolesnikov, Mugahed Amran

Summary: This paper presents a study on the thermodynamic simulation of environmental and population protection by utilizing waste materials for clinker production and zinc extraction. The results show the temperature intervals of mineral formation and the relationship between Gibbs energy and temperature.

MATERIALS (2022)

Article Geochemistry & Geophysics

Selective Ozone-Assisted Acid Leaching of Copper from Copper Smelter Slag by Using Isopropanol as a Solvent

Rashid Nadirov, Galymzhan Karamyrzayev

Summary: The isopropanol-sulfuric acid-ozone system is an effective method to extract copper from copper smelter slag, with isopropanol playing a key role in increasing copper recovery. Ozone is proven to oxidize ferrous ions and cuprous ions are found in solution.

MINERALS (2022)

Article Engineering, Chemical

Enhancing Barite Carbothermal Reduction with Brown Coal by Compaction of the Charge

Tlek Ketegenov, Kaster Kamunur, Aisulu Batkal, Rashid Nadirov

Summary: This study investigates the synthesis of barium sulfide using carbothermal reduction in compacted mixtures. The results demonstrate that compaction enhances the conversion of barium sulfate to sulfide and reduces the activation energy.

PROCESSES (2022)

Review Engineering, Chemical

Recent Advances in the Preparation of Barium Sulfate Nanoparticles: A Mini-Review

Tlek Ketegenov, Kaster Kamunur, Aisulu Batkal, Diana Gani, Rashid Nadirov

Summary: This review focuses on the potential applications of barium sulphate nanoparticles in various fields, as well as the methods for their production. The top-down approach of milling is less popular due to difficulties in controlling particle size and shape, while the bottom-up approach of liquid-phase reactions shows more promise. Techniques such as microemulsions, microreactors membrane dispersion, and spinning disc reactors overcome the limitations of direct precipitation and allow control of particle size and shape.

CHEMENGINEERING (2022)

Article Biology

Copper smelter slag leaching with hydrochloric acid in isopropyl alcohol: kinetic study

R. K. Nadirov, M. D. Turan, G. A. Karamyrzayev

INTERNATIONAL JOURNAL OF BIOLOGY AND CHEMISTRY (2020)

Article Biology

In Vivo Comparison of Chlorine-Based Antiseptics versus Alcohol Antiseptic for Surgical Hand Antisepsis

Zhannur Myltykbayeva, Galina Kovaleva, Azamat Mukhitdinov, Sandugash Omarova, Rashid Nadirov

SCIENTIFICA (2020)

Article Chemistry, Multidisciplinary

New Potential Demulsifiers Obtained by Processing Gossypol Resin

Nurlybek Shyrynbekuly Otarbaev, Vladimir Mikhailovich Kapustin, Kazim Sadykovich Nadirov, Gulmira Zhankabylovna Bimbetova, Manap Kurmanbekovich Zhantasov, Rashid Kazimovich Nadirov

INDONESIAN JOURNAL OF CHEMISTRY (2019)

Article Biology

Copper ammonia leaching from smelter slag

R. K. Nadirov, M. D. Turan, G. A. Karamyrzayev

INTERNATIONAL JOURNAL OF BIOLOGY AND CHEMISTRY (2019)

Article Geosciences, Multidisciplinary

SEPARATION OF FREE FATTY ACIDS FROM COTTON TAR

K. S. Nadirov, N. Sh Otarbaev, R. K. Nadirov, V. M. Kapustin, A. S. Sadyrbaeva, G. Zh Bimbetova

NEWS OF THE NATIONAL ACADEMY OF SCIENCES OF THE REPUBLIC OF KAZAKHSTAN-SERIES OF GEOLOGY AND TECHNICAL SCIENCES (2019)

No Data Available