Feasibility of Distributed Fiber Optic Sensor for Corrosion Monitoring of Steel Bars in Reinforced Concrete

Corrosion rate of carbon steel in carbonated concrete – A critical review

(2018) M. Stefanoni et al.   CEMENT AND CONCRETE RESEARCH

Influence of matrix cracking and hybrid fiber reinforcement on the corrosion initiation and propagation behaviors of reinforced concrete

(2018) Wilson Nguyen et al.   CORROSION SCIENCE

Electrochemical polarization and impedance of reinforced concrete and hybrid fiber-reinforced concrete under cracked matrix conditions

(2018) Wilson Nguyen et al.   ELECTROCHIMICA ACTA

Challenges and opportunities in corrosion of steel in concrete

(2018) Ueli M. Angst   MATERIALS AND STRUCTURES

Bond strength of steel bars embedded in high-performance fiber-reinforced cementitious composite before and after exposure to elevated temperatures

(2017) Xiuling Li et al.   FIRE SAFETY JOURNAL

Monitoring Concrete Deterioration Due to Reinforcement Corrosion by Integrating Acoustic Emission and FBG Strain Measurements

(2017) Weijie Li et al.   SENSORS

Temperature measurement and damage detection in concrete beams exposed to fire using PPP-BOTDA based fiber optic sensors

(2017) Yi Bao et al.   Smart Materials and Structures

Distributed fiber optic sensor-enhanced detection and prediction of shrinkage-induced delamination of ultra-high-performance concrete overlay

(2017) Yi Bao et al.   Smart Materials and Structures

Corrosion Resistance of Transmission Pipeline Steel Coated with Five Types of Enamels

(2017) Liang Fan et al.   Acta Metallurgica Sinica-English Letters

Impact and corrosion resistances of duplex epoxy/enamel coated plates

(2016) Fujian Tang et al.   CONSTRUCTION AND BUILDING MATERIALS

Temperature-dependent strain and temperature sensitivities of fused silica single mode fiber sensors with pulse pre-pump Brillouin optical time domain analysis

(2016) Yi Bao et al.   MEASUREMENT SCIENCE and TECHNOLOGY

High-temperature measurement with Brillouin optical time domain analysis of an annealed fused-silica single-mode fiber

(2016) Yi Bao et al.   OPTICS LETTERS

Corrosion detection of steel reinforced concrete using combined carbon fiber and fiber Bragg grating active thermal probe

(2016) Weijie Li et al.   Smart Materials and Structures

Concrete pavement monitoring with PPP-BOTDA distributed strain and crack sensors

(2016) Yi Bao et al.   Smart Structures and Systems

Strain distribution and crack detection in thin unbonded concrete pavement overlays with fully distributed fiber optic sensors

(2015) Yi Bao et al.   OPTICAL ENGINEERING

Monitoring the Corrosion Process of Reinforced Concrete Using BOTDA and FBG Sensors

(2015) Jianghong Mao et al.   SENSORS

Acoustic emission vis-à-vis electrochemical techniques for corrosion monitoring of reinforced concrete element

(2014) Shilpa Patil et al.   CONSTRUCTION AND BUILDING MATERIALS

On the applicability of the Stern-Geary relationship to determine instantaneous corrosion rates in macro-cell corrosion

(2014) U. Angst et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Steel bar corrosion monitoring with long-period fiber grating sensors coated with nano iron/silica particles and polyurethane

(2014) Ying Huang et al.   STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL

Long period fiber grating sensors coated with nano iron/silica particles for corrosion monitoring

(2013) Ying Huang et al.   Smart Materials and Structures

Brillouin Corrosion Expansion Sensors for Steel Reinforced Concrete Structures Using a Fiber Optic Coil Winding Method

(2011) Xuefeng Zhao et al.   SENSORS

Recent Progress in Brillouin Scattering Based Fiber Sensors

(2011) Xiaoyi Bao et al.   SENSORS

Laboratory investigation of reinforcement corrosion initiation and chloride threshold content for self-compacting concrete

(2010) Hui Yu et al.   CEMENT AND CONCRETE RESEARCH

Monitoring of corrosion in reinforced concrete structure using Bragg grating sensing

(2010) Junqi Gao et al.   NDT & E INTERNATIONAL