Effect of lithium hexafluorophosphate LiPF6 and 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [Bmim][TFSI] immobilized in poly(2-hydroxyethyl methacrylate) PHEMA

Structural and dynamic properties of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide/mica and graphite interfaces revealed by molecular dynamics simulation

(2018) Yasuyuki Yokota et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Effect of ZnO Filler on PVA-Alkaline Solid Polymer Electrolyte for Aluminum-Air Battery Applications

(2018) Marliyana Mokhtar et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Effect of lithium salt on physicochemical properties of P(MMA-co-EMA) based copolymer electrolytes for dye-sensitized solar cell application

(2017) N. A. Dzulkurnain et al.   IONICS

Solid polymer electrolytes based on Li+/ionic liquid for lithium secondary batteries

(2017) Varun Kumar Singh et al.   JOURNAL OF SOLID STATE ELECTROCHEMISTRY

Poly(3,4-ethylenedioxythiophene) electrode grown in the presence of ionic liquid and its symmetrical electrochemical supercapacitor application

(2017) Buket Bezgin Carbas et al.   POLYMER BULLETIN

Hydrogen sulphate-based ionic liquid-assisted electro-polymerization of PEDOT catalyst material for high-efficiency photoelectrochemical solar cells

(2017) Buket Bezgin Carbas et al.   Scientific Reports

Development of a redox polymer based on poly(2-hydroxyethyl methacrylate) for disposable amperometric sensors

(2016) Chiara Zanardi et al.   ELECTROCHEMISTRY COMMUNICATIONS

Impacts of ceramic filler and the crystallite size of polymer matrix on the ionic transport properties of lithium triflate/poly (vinylidene fluoride-co-hexafluoropropene) based polymer electrolytes

(2016) Asheesh Kumar et al.   ELECTROCHIMICA ACTA

Structural, Morphological and Electrochemical Impedance Study of CS:LiTf based Solid Polymer Electrolyte: Reformulated Arrhenius Equation for Ion Transport Study

(2016) Shujahadeen B. Aziz et al.   International Journal of Electrochemical Science

A new strategy for preparing oligomeric ionic liquid gel polymer electrolytes for high-performance and nonflammable lithium ion batteries

(2016) Ping-Lin Kuo et al.   JOURNAL OF MEMBRANE SCIENCE

Effective influences of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide (EMIMTFSI) ionic liquid on the ion transport properties of micro-porous zinc-ion conducting poly (vinyl chloride) /poly (ethyl methacrylate) blend-based polymer electrolytes

(2016) C. M. Sai Prasanna et al.   JOURNAL OF POLYMER RESEARCH

Effect of ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide on the properties of poly(glycidyl methacrylate) based solid polymer electrolytes

(2016) M. R. N. Nabilah et al.   RUSSIAN JOURNAL OF ELECTROCHEMISTRY

Addition of 1 Methyl-3 Propyl Imidazolium Iodide Into Polymer Electrolyte System for Enhancement in Dye Sensitized Solar Cell Efficiency

(2016) N. A. Dzulkurnain et al.   Science of Advanced Materials

Polymer electrolytes for lithium polymer batteries

(2016) Lizhen Long et al.   Journal of Materials Chemistry A

Ion transport properties of magnesium bromide/dimethyl sulfoxide non-aqueous liquid electrolyte

(2016) E. Sheha   Journal of Advanced Research

An Investigation of Gel Polymer Electrolytes Plasticized with Imidazolium Ionic Liquid

(2015) N.N.M. Radzir et al.   ASIAN JOURNAL OF CHEMISTRY

Hydrogen ion conducting starch-chitosan blend based electrolyte for application in electrochemical devices

(2015) M.F. Shukur et al.   ELECTROCHIMICA ACTA

Biomedical applications of hydrogels: A review of patents and commercial products

(2015) Enrica Caló et al.   EUROPEAN POLYMER JOURNAL

Microporous polymer electrolyte based on PVDF/PEO star polymer blends for lithium ion batteries

(2015) Fangli Deng et al.   JOURNAL OF MEMBRANE SCIENCE

Effect of lithium bis(trifluoromethylsulfonyl)imide salt-doped UV-cured glycidyl methacrylate

(2015) Nurul Nabilah Mohd Radzir et al.   JOURNAL OF SOLID STATE ELECTROCHEMISTRY

Studies on structural, thermal and AC conductivity scaling of PEO-LiPF6 polymer electrolyte with added ionic liquid [BMIMPF6]

(2015) S. K. Chaurasia et al.   AIP Advances

P(MMA-EMA) Random Copolymer Electrolytes Incorporating Sodium Iodide for Potential Application in a Dye-Sensitized Solar Cell

(2015) Nurul Dzulkurnain et al.   Polymers

Development of ion conducting polymer gel electrolyte membranes based on polymer PVdF-HFP, BMIMTFSI ionic liquid and the Li-salt with improved electrical, thermal and structural properties

(2015) Shalu Shalu et al.   Journal of Materials Chemistry C

Influence of carbon nanotubes on the optical properties of plasticized solid polymer electrolytes

(2013) Suriani Ibrahim et al.   APPLIED SURFACE SCIENCE

Energy applications of ionic liquids

(2013) Douglas R. MacFarlane et al.   Energy & Environmental Science

Tailor-made fumed silica-based nano-composite polymer electrolytes consisting of BmImTFSI ionic liquid

(2012) S. Ramesh et al.   IRANIAN POLYMER JOURNAL

Impact of low viscosity ionic liquid on PMMA–PVC–LiTFSI polymer electrolytes based on AC -impedance, dielectric behavior, and HATR–FTIR characteristics

(2012) Chiam-Wen Liew et al.   JOURNAL OF MATERIALS RESEARCH

Conductivity, thermal and morphology studies of PEO based salted polymer electrolytes

(2012) Suriani Ibrahim et al.   SOLID STATE SCIENCES

Rheological characterizations of ionic liquid-based gel polymer electrolytes and fumed silica-based composite polymer electrolytes

(2011) S. Ramesh et al.   CERAMICS INTERNATIONAL

Synthesis and characterization of poly(2-hydroxyethyl methacrylate/itaconic acid/poly(ethylene glycol) dimethacrylate) hydrogels

(2011) Sava N. Dobić et al.   CHEMICAL ENGINEERING JOURNAL

Quasi-solid-state dye-sensitized solar cell fabricated with poly (β-hydroxyethyl methacrylate) based organogel electrolyte

(2011) Zhexun Yu et al.   Energy & Environmental Science

Hemocompatibility and swelling studies of poly(2-hydroxyethyl methacrylate-co-itaconic acid-co-poly(ethylene glycol) dimethacrylate) hydrogels

(2011) Sava Dobic et al.   Hemijska Industrija

Conductivity and optical studies of plasticized solid polymer electrolytes doped with carbon nanotube

(2011) Suriani Ibrahim et al.   JOURNAL OF LUMINESCENCE

Evaluation and investigation on the effect of ionic liquid onto PMMA-PVC gel polymer blend electrolytes

(2011) S. Ramesh et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Characterization of pTMCnLiPF6 solid polymer electrolytes

(2011) P.C. Barbosa et al.   SOLID STATE IONICS

Preparation and characterization of lithium hexafluorophosphate for lithium-ion battery electrolyte

(2010) Jian-wen LIU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Performance of lithium-ion cells using 1 M LiPF6 in EC/DEC (v/v = 1/2) electrolyte with ethyl propionate additive

(2009) M. Z. Kufian et al.   IONICS

Two step modification of poly(vinyl alcohol) by UV radiation with 2-hydroxy ethyl methacrylate and sol–gel process for the application of polymer electrolyte membrane

(2009) Jen Ming Yang et al.   JOURNAL OF MEMBRANE SCIENCE

Preparation and characterization of PMMA–MG49–LiClO4solid polymeric electrolyte

(2009) M S Su'ait et al.   JOURNAL OF PHYSICS D-APPLIED PHYSICS

Enhanced Lithium Transference Numbers in Ionic Liquid Electrolytes

(2008) T. Frömling et al.   JOURNAL OF PHYSICAL CHEMISTRY B

Synthesis, structure and bioactivity of pHEMA/SiO2 hybrids derived through in situ sol–gel process

(2008) G. Luciani et al.   JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY

Determination of Lithium-Ion Transference Numbers in LiPF[sub 6]–PC Solutions Based on Electrochemical Polarization and NMR Measurements

(2008) Jishi Zhao et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY