Tailoring Hydrocarbon Polymers and All-Hydrocarbon Composites for Circular Economy

Self-Reinforcement of Polypropylene Lid-Shaped Samples Induced by Increasing Shish-Kebab Content: Practical Application of Vibration Injection Technology

(2018) YingXiong Wang et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Processing-Nanostructure-Property Relationships of All-Polyethylene Composites Reinforced by Flow-Induced Oriented Crystallization of UHMWPE

(2018) Fan Zhong et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

All-polyethylene composites reinforced via extended-chain UHMWPE nanostructure formation during melt processing

(2018) Fan Zhong et al.   POLYMER

A critical review on recycling of end-of-life carbon fibre/glass fibre reinforced composites waste using pyrolysis towards a circular economy

(2018) S.R. Naqvi et al.   RESOURCES CONSERVATION AND RECYCLING

Wear resistant all-PE single-component composites via 1D nanostructure formation during melt processing

(2018) Timo Hees et al.   POLYMER

Catalytic pyrolysis of waste plastics using staged catalysis for production of gasoline range hydrocarbon oils

(2017) Devy K. Ratnasari et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

A review of optimisation techniques used in the composite recycling area: State-of-the-art and steps towards a research agenda

(2017) Ying Liu et al.   JOURNAL OF CLEANER PRODUCTION

Towards zero waste manufacturing: A multidisciplinary review

(2017) Sunpreet Singh et al.   JOURNAL OF CLEANER PRODUCTION

A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)

(2017) S.M. Al-Salem et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

Tailored Nanostructured HDPE Wax/UHMWPE Reactor Blends as Additives for Melt-Processable All-Polyethylene Composites and in Situ UHMWPE Fiber Reinforcement

(2017) Daniel Hofmann et al.   MACROMOLECULES

River plastic emissions to the world’s oceans

(2017) Laurent C. M. Lebreton et al.   Nature Communications

A review on circular economy: the expected transition to a balanced interplay of environmental and economic systems

(2016) Patrizia Ghisellini et al.   JOURNAL OF CLEANER PRODUCTION

Heterogeneous Distribution of Entanglements in a Nonequilibrium Polymer Melt of UHMWPE: Influence on Crystallization without and with Graphene Oxide

(2016) Kangsheng Liu et al.   MACROMOLECULES

Nanostructured Polyethylene Reactor Blends with Tailored Trimodal Molar Mass Distributions as Melt-Processable All-Polymer Composites

(2016) Markus Stürzel et al.   MACROMOLECULES

Multisite catalyst mediated polymer nanostructure formation and self-reinforced polyethylene reactor blends with improved toughness/stiffness balance

(2016) Markus Stürzel et al.   POLYMER

Bidimensional ZSM-5 zeolites probed as catalysts for polyethylene cracking

(2016) A. Peral et al.   Catalysis Science & Technology

A concise review on smart polymers for controlled drug release

(2016) Arezou Aghabegi Moghanjoughi et al.   Drug Delivery and Translational Research

From Multisite Polymerization Catalysis to Sustainable Materials and All-Polyolefin Composites

(2015) Markus Stürzel et al.   CHEMICAL REVIEWS

Nanomaterials for Functional Textiles and Fibers

(2015) Pedro J. Rivero et al.   Nanoscale Research Letters

Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties

(2015) Géraldine Oliveux et al.   PROGRESS IN MATERIALS SCIENCE

Nanomaterials for Functional Textiles and Fibers

(2015) Pedro J. Rivero et al.   Nanoscale Research Letters

Photocatalytic Conversion of CO2into Renewable Hydrocarbon Fuels: State-of-the-Art Accomplishment, Challenges, and Prospects

(2014) Wenguang Tu et al.   ADVANCED MATERIALS

Post-Metallocenes in the Industrial Production of Polyolefins

(2014) Moritz C. Baier et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Recycling of Polymers: A Review

(2014) Igor A. Ignatyev et al.   ChemSusChem

A Hemi-metallocene Chromium Catalyst with Trimethylaluminum-Free Methylaluminoxane for the Synthesis of Disentangled Ultra-High Molecular Weight Polyethylene

(2014) Dario Romano et al.   MACROMOLECULAR RAPID COMMUNICATIONS

Graphene-Supported Dual-Site Catalysts for Preparing Self-Reinforcing Polyethylene Reactor Blends Containing UHMWPE Nanoplatelets and in Situ UHMWPE Shish-Kebab Nanofibers

(2014) Markus Stürzel et al.   MACROMOLECULES

Plastic Pollution in the World's Oceans: More than 5 Trillion Plastic Pieces Weighing over 250,000 Tons Afloat at Sea

(2014) Marcus Eriksen et al.   PLoS One

Single-polymer composites (SPCs): Status and future trends

(2013) J. Karger-Kocsis et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Immobilisation of homogeneous olefin polymerisation catalysts. Factors influencing activity and stability

(2013) John R. Severn et al.   DALTON TRANSACTIONS

Status and perspectives of CO2 conversion into fuels and chemicals by catalytic, photocatalytic and electrocatalytic processes

(2013) Evgenii V. Kondratenko et al.   Energy & Environmental Science

Two-site silica supported Fe/Cr catalysts for tailoring bimodal polyethylenes with variable content of UHMWPE

(2013) Alexander Kurek et al.   JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL

Silica Nanofoam (NF) Supported Single- and Dual-Site Catalysts for Ethylene Polymerization with Morphology Control and Tailored Bimodal Molar Mass Distributions

(2013) Alexander Kurek et al.   MACROMOLECULES

Heterogeneous Ziegler-Natta, metallocene, and post-metallocene catalysis: Successes and challenges in industrial application

(2013) Markus Gahleitner et al.   MRS BULLETIN

Effect of processing parameters on the morphology development during extrusion of polyethylene tape: An in-line small-angle X-ray scattering (SAXS) study

(2013) E.L. Heeley et al.   POLYMER

Self-extinguishing polypropylene with a mass fraction of 9% intumescent additive II – Influence of highly oriented fibres

(2013) Katalin Bocz et al.   POLYMER DEGRADATION AND STABILITY

Improving the performance of a catalytic system for the synthesis of ultra high molecular weight polyethylene with a reduced number of entanglements

(2012) Sara Ronca et al.   ADVANCES IN POLYMER TECHNOLOGY

Novel anticorrosion coatings prepared from polyaniline/graphene composites

(2012) Chi-Hao Chang et al.   CARBON

Recent advances in the photocatalytic conversion of carbon dioxide to fuels with water and/or hydrogen using solar energy and beyond

(2012) Yasuo Izumi   COORDINATION CHEMISTRY REVIEWS

Development and characterisation of injection moulded, all-polypropylene composites

(2012) A. Kmetty et al.   Express Polymer Letters

Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed

(2012) Gorka Elordi et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Morphologies and Mechanical Properties of High-Density Polyethylene Induced by the Addition of Small Amounts of Both Low- and High-Molecular-Weight Polyolefin under Shear Stress Applied by Dynamic Packing Injection Molding

(2012) Jianguo Cao et al.   Journal of Macromolecular Science Part B-Physics

Green Polymer Chemistry and Bio-based Plastics: Dreams and Reality

(2012) Rolf Mülhaupt   MACROMOLECULAR CHEMISTRY AND PHYSICS

Tailoring molecular structure via nanoparticles for solvent-free processing of ultra-high molecular weight polyethylene composites

(2012) Sara Ronca et al.   POLYMER

Development of flame retarded self-reinforced composites from automotive shredder plastic waste

(2012) Katalin Bocz et al.   POLYMER DEGRADATION AND STABILITY

Developing Advanced Catalysts for the Conversion of Polyolefinic Waste Plastics into Fuels and Chemicals

(2012) D. P. Serrano et al.   ACS Catalysis

FI Catalysts for Olefin Polymerization—A Comprehensive Treatment

(2011) Haruyuki Makio et al.   CHEMICAL REVIEWS

Biomimicry in textiles: past, present and potential. An overview

(2011) L. Eadie et al.   Journal of the Royal Society Interface

Unprecedented High-Modulus High-Strength Tapes and Films of Ultrahigh Molecular Weight Polyethylene via Solvent-Free Route

(2011) Sanjay Rastogi et al.   MACROMOLECULES

Heterogeneity in the Distribution of Entanglement Density during Polymerization in Disentangled Ultrahigh Molecular Weight Polyethylene

(2011) Anurag Pandey et al.   MACROMOLECULES

Microplastics as contaminants in the marine environment: A review

(2011) Matthew Cole et al.   MARINE POLLUTION BULLETIN

Recent advances in polyolefin technology

(2011) Jinliang Qiao et al.   Polymer Chemistry

Development of self-reinforced polymer composites

(2011) Chengcheng Gao et al.   PROGRESS IN POLYMER SCIENCE

Biomass to liquid: A prospective challenge to research and development in 21st century

(2011) Pravat K. Swain et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Pyrolysis of polyolefins for increasing the yield of monomers’ recovery

(2011) Pawel J. Donaj et al.   WASTE MANAGEMENT

Toward Solar Fuels: Photocatalytic Conversion of Carbon Dioxide to Hydrocarbons

(2010) Somnath C. Roy et al.   ACS Nano

STUDIES ON STRUCTURE AND PROPERTIES OFiPP INJECTION-MOLDED IN LOW FREQUENCY VIBRATION FIELD

(2010) You-bing LI et al.   ACTA POLYMERICA SINICA

A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research

(2010) Yun Wang et al.   APPLIED ENERGY

How copper catalyzes the electroreduction of carbon dioxide into hydrocarbon fuels

(2010) Andrew A. Peterson et al.   Energy & Environmental Science

Sustainability Metrics: Life Cycle Assessment and Green Design in Polymers

(2010) Michaelangelo D. Tabone et al.   ENVIRONMENTAL SCIENCE & TECHNOLOGY

FI Catalysts: Unique Olefin Polymerization Catalysis for Formation of Value-added Olefin-based Materials

(2010) Yasushi Nakayama et al.   JOURNAL OF THE JAPAN PETROLEUM INSTITUTE

Mesoporous Silica Supported Multiple Single-Site Catalysts and Polyethylene Reactor Blends with Tailor-Made Trimodal and Ultra-Broad Molecular Weight Distributions

(2010) Alexander Kurek et al.   MACROMOLECULAR RAPID COMMUNICATIONS

Control of Structural Morphology in Shear-Induced Crystallization of Polymers

(2010) Oleksandr O. Mykhaylyk et al.   MACROMOLECULES

Molar Mass and Molecular Weight Distribution Determination Of UHMWPE Synthesized Using a Living Homogeneous Catalyst

(2010) Saeid Talebi et al.   MACROMOLECULES

Turning carbon dioxide into fuel

(2010) Z. Jiang et al.   PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

Supported hybrid early and late transition metal catalysts for the synthesis of polyethylene with tailored molecular weight and chemical composition distributions

(2010) Yiyoung Choi et al.   POLYMER

Self-reinforced polymeric materials: A review

(2010) Ákos Kmetty et al.   PROGRESS IN POLYMER SCIENCE

Plastic waste management in the context of a European recycling society: Comparing results and uncertainties in a life cycle perspective

(2010) David Lazarevic et al.   RESOURCES CONSERVATION AND RECYCLING

Development and Application of FI Catalysts for Olefin Polymerization: Unique Catalysis and Distinctive Polymer Formation

(2009) Haruyuki Makio et al.   ACCOUNTS OF CHEMICAL RESEARCH

Molecular Approaches to the Photocatalytic Reduction of Carbon Dioxide for Solar Fuels

(2009) Amanda J. Morris et al.   ACCOUNTS OF CHEMICAL RESEARCH

Tensile mechanical and perforation impact behavior of all-PP composites containing random PP copolymer as matrix and stretched PP homopolymer as reinforcement: Effect of β nucleation of the matrix

(2009) T.N. Abraham et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Development of woven fabric reinforced all-polypropylene composites with beta nucleated homo- and copolymer matrices

(2009) András Izer et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Overview of fuel properties of biomass fast pyrolysis oils

(2009) Qiang Lu et al.   ENERGY CONVERSION AND MANAGEMENT

The effect of processing conditions on the mechanical properties and thermal stability of highly oriented PP tapes

(2009) B. Alcock et al.   EUROPEAN POLYMER JOURNAL

Recent Technical Advances in Polypropylene

(2009) Gabriele Mei et al.   JOURNAL OF PLASTIC FILM & SHEETING

Plastics recycling: challenges and opportunities

(2009) J. Hopewell et al.   PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES

Plastics, the environment and human health: current consensus and future trends

(2009) R. C. Thompson et al.   PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES

Accumulation and fragmentation of plastic debris in global environments

(2009) D. K. A. Barnes et al.   PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES

Effect of low-frequency melt vibration on HDPE morphology

(2009) Youbing Li et al.   POLYMER INTERNATIONAL

Mechanical Properties and Crystal Structure of HDPE Induced by Small Amount of High-molecular-weight and Low-molecular-weight Polyethylene under Shear Stress Produced by Dynamic Packing Injection Molding

(2009) Zhanchun Chen et al.   POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING

Thermolysis of waste plastics to liquid fuelA suitable method for plastic waste management and manufacture of value added products—A world prospective

(2009) Achyut K. Panda et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Recycling and recovery routes of plastic solid waste (PSW): A review

(2009) S.M. Al-Salem et al.   WASTE MANAGEMENT

Biofuels and Biomass-To-Liquid Fuels in the Biorefinery: Catalytic Conversion of Lignocellulosic Biomass using Porous Materials

(2008) Michael Stöcker   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Fischer-Tropsch Catalysts for the Biomass-to-Liquid (BTL)-Process

(2008) E. van Steen et al.   CHEMICAL ENGINEERING & TECHNOLOGY

Catalytic and thermal cracking of selected polyolefins

(2008) Jozef Mikulec et al.   Clean Technologies and Environmental Policy

Synthetic polymers in the marine environment: A rapidly increasing, long-term threat

(2008) Charles James Moore   ENVIRONMENTAL RESEARCH

A comparison of The Limits to Growth with 30 years of reality

(2008) G TURNER   GLOBAL ENVIRONMENTAL CHANGE-HUMAN AND POLICY DIMENSIONS

Morphologies and mechanical properties of HDPE induced by small amount of high-molecular-weight polyolefin and shear stress produced by dynamic packing injection molding

(2008) Zhanchun Chen et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Chemical Recycling of Carbon Dioxide to Methanol and Dimethyl Ether: From Greenhouse Gas to Renewable, Environmentally Carbon Neutral Fuels and Synthetic Hydrocarbons

(2008) George A. Olah et al.   JOURNAL OF ORGANIC CHEMISTRY

The Specific Work of Flow as a Criterion for Orientation in Polymer Crystallization

(2008) Oleksandr O. Mykhaylyk et al.   MACROMOLECULES

Shish–kebab of polyolefin by “melt manipulation” strategy in injection-molding: A convenience pathway from fundament to application

(2008) Ke Wang et al.   POLYMER

Impact resistance of all-polypropylene composites composed of alpha and beta modifications

(2008) Tamás Bárány et al.   POLYMER TESTING

Study on the Improvement of Crystallization in HDPE Induced by High–Molecular-Weight Polyethylene Through Dynamic Packing Injection Molding

(2008) C. Deng et al.   POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING

Self-Reinforced Isotactic Polypropylene Prepared by Melt Vibration Injection Molding

(2008) Li Youbing et al.   POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING

The effect of temperature and strain rate on the impact performance of recyclable all-polypropylene composites

(2007) B. Alcock et al.   COMPOSITES PART B-ENGINEERING

The use of interleaved films for optimising the production and properties of hot compacted, self reinforced polymer composites

(2007) P.J. Hine et al.   COMPOSITES SCIENCE AND TECHNOLOGY