Formation of Lamellar Carbides in Alloy 617-HAZ and Their Role in the Impact Toughness of Alloy 617/9%Cr Dissimilar Welded Joint

Microstructural hardness heterogeneity triggers fatigue crack non-propagation in as-hot-rolled Fe-30Mn-3Si-3Al twinning-induced plasticity steel

(2018) Motomichi Koyama et al.   INTERNATIONAL JOURNAL OF FATIGUE

Phenomenological model for the effect of strain rate on recrystallization and grain growth kinetics in the 617B alloy

(2018) He Jiang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical performance of welded joint between a novel heat-resistant steel and Inconel 617 weld metal

(2018) Yu Zhang et al.   MATERIALS CHARACTERIZATION

Microstructure evolution in Alloy 617 B after a long-term creep and thermal aging at 700 °C

(2018) Magdalena Speicher et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fatigue Crack Growth Behavior of a New Type of 10% Cr Martensitic Steel Welded Joints with Ni-Based Weld Metal

(2017) Qunbing Zhang et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Investigation on the weakest zone in toughness of 9Cr/NiCrMoV dissimilar welded joint and its enhancement

(2017) Xia Liu et al.   JOURNAL OF MATERIALS RESEARCH

Effect of microstructural evolution by isothermal aging on the mechanical properties of 9Cr-1WVTa reduced activation ferritic/martensitic steels

(2017) Min-Gu Park et al.   JOURNAL OF NUCLEAR MATERIALS

Evolution of the microstructure and microhardness of the welding joint of IN 740H alloy with IN 617 as filler metal

(2017) Hongfei Yin et al.   MATERIALS CHARACTERIZATION

Evolution of carbides and its characterization in HAZ during NG-TIG welding of Alloy 617B

(2017) Huali Xu et al.   MATERIALS CHARACTERIZATION

RNA-Sequencing data supports the existence of novel VEGFA splicing events but not of VEGFAxxxb isoforms

(2017) Stephen Bridgett et al.   Scientific Reports

Role of stress in the high cycle fatigue behavior of advanced 9Cr/CrMoV dissimilarly welded joint

(2016) Chendong Shao et al.   JOURNAL OF MATERIALS RESEARCH

The microstructure evolution and element segregation of Inconel 617 alloy tungsten inert gas welded joint

(2016) Wen Liu et al.   JOURNAL OF MATERIALS RESEARCH

Toughness evolution of 9Cr–3W–3Co martensitic heat resistant steel during long time aging

(2016) Peng Yan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

An Assessment of the Mechanical Properties and Microstructural Analysis of Dissimilar Material Welded Joint between Alloy 617 and 12Cr Steel

(2016) Hafiz Ahmad et al.   Metals

Failure transition mechanism in creep rupture of modified casting 9Cr-1.5Mo-1Co welded joint

(2016) Yuanhang Wei et al.   MATERIALS & DESIGN

Hot deformation characteristics of Alloy 617B nickel-based superalloy: A study using processing map

(2015) He Jiang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Interaction between particle precipitation and creep behavior in the NI-base Alloy 617B: Microstructural observations and constitutive material model

(2015) J. Haan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Creep behavior and microstructure evaluation of welded joint in dissimilar modified 9Cr–1Mo steels

(2015) Wen Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

In-situ investigation of thermal aging effect on oxide formation in Ni-base alloy/low alloy steel dissimilar metal weld interfaces

(2014) Jongjin Kim et al.   CORROSION SCIENCE

Role of butter layer in low-cycle fatigue behavior of modified 9Cr and CrMoV dissimilar rotor welded joint

(2014) Qingjun Wu et al.   MATERIALS & DESIGN

Mechanism of plastic deformation of a Ni-based superalloy for VHTR applications

(2013) Kun Mo et al.   JOURNAL OF NUCLEAR MATERIALS

Aging precipitation behavior and mechanical properties of Inconel 617 superalloy

(2013) Yan Guo et al.   Acta Metallurgica Sinica-English Letters

Microstructural evolution of a Ni-based superalloy (617B) at 700°C studied by electron microscopy and atom probe tomography

(2012) Darius Tytko et al.   ACTA MATERIALIA

Tensile and impact behaviour of a microalloyed medium carbon steel: Effect of the cooling condition and corresponding microstructure

(2012) L. Ceschini et al.   MATERIALS & DESIGN

Characterization of microstructures and mechanical properties of Inconel 617/310 stainless steel dissimilar welds

(2011) H. Shah Hosseini et al.   MATERIALS CHARACTERIZATION

Creep Behavior and Degradation of Subgrain Structures Pinned by Nanoscale Precipitates in Strength-Enhanced 5 to 12 Pct Cr Ferritic Steels

(2011) Hassan Ghassemi Armaki et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Creep deformation of Alloys 617 and 276 at 750–950°C

(2009) Ajit K. Roy et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dissimilar welding of AISI 310 austenitic stainless steel to nickel-based alloy Inconel 657

(2008) H. Naffakh et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Microstructure of Long-Term Aged IN617 Ni-Base Superalloy

(2008) Quanyan Wu et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Microstructure and long-term creep properties of 9–12% Cr steels

(2007) J. Hald   INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING

Design of martensitic/ferritic heat-resistant steels for application at 650°C with supporting thermodynamic modelling

(2007) V. Knežević et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING