Rapid Prototyping for Photochemical Reaction Engineering

3D Printing for Chemical Process Laboratories I: Materials and Connection Principles

(2018) Marius Gerrit Gelhausen et al.   CHEMICAL ENGINEERING & TECHNOLOGY

Intensification of heat transfer in catalytic reactors by additively manufactured periodic open cellular structures (POCS)

(2018) Corinna Busse et al.   CHEMICAL ENGINEERING AND PROCESSING

3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors

(2018) Cesar Parra-Cabrera et al.   CHEMICAL SOCIETY REVIEWS

Design and Evaluation of a Novel Light-Emitting Diode Photocatalytic Reactor for Water Treatment

(2018) Linlong Yu et al.   JOURNAL OF ENVIRONMENTAL ENGINEERING

Design and Evaluation of a Novel Light-Emitting Diode Photocatalytic Reactor for Water Treatment

(2018) Linlong Yu et al.   JOURNAL OF ENVIRONMENTAL ENGINEERING

Impact of the Type of Reactor and the Catalytic Conditions on the Photocatalytic Production of Hydrogen Using a Fully Noble-Metal-Free System

(2018) Immanuel Reim et al.   ChemistrySelect

Heterogeneous Photoredox Catalysis: Reactions, Materials, and Reaction Engineering

(2017) Jonathan Z. Bloh et al.   EUROPEAN JOURNAL OF ORGANIC CHEMISTRY

Three-dimensional printing of transparent fused silica glass

(2017) Frederik Kotz et al.   NATURE

The Boom in 3D-Printed Sensor Technology

(2017) Yuanyuan Xu et al.   SENSORS

Direct 3D Printing of Catalytically Active Structures

(2017) J. Sebastián Manzano et al.   ACS Catalysis

Combining additive manufacturing and catalysis: a review

(2017) C. Hurt et al.   Catalysis Science & Technology

A 3D-Printed Sensor for Monitoring Biosignals in Small Animals

(2017) Sung-Joon Cho et al.   Journal of Healthcare Engineering

Continuous-flow photochemistry: A need for chemical engineering

(2016) Karine Loubière et al.   CHEMICAL ENGINEERING AND PROCESSING

Additiv gefertigte zellulare Strukturen als Katalysatorträger für ein- und mehrphasige Reaktionssysteme

(2016) M. Lämmermann et al.   CHEMIE INGENIEUR TECHNIK

Getting the Most out of Solar Irradiation: Efficient Use of Polychromatic Light for Water Splitting

(2016) Ümit Taştan et al.   CHEMISTRY-A EUROPEAN JOURNAL

Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review

(2016) Yong He et al.   ELECTROANALYSIS

Frontiers of 3D Printing/Additive Manufacturing: from Human Organs to Aircraft Fabrication†

(2016) Lawrence E. Murr   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

3D printed microfluidic devices: enablers and barriers

(2016) Sidra Waheed et al.   LAB ON A CHIP

The upcoming 3D-printing revolution in microfluidics

(2016) Nirveek Bhattacharjee et al.   LAB ON A CHIP

3D printing of versatile reactionware for chemical synthesis

(2016) Philip J Kitson et al.   Nature Protocols

3D printing: an emerging technology for sensor fabrication

(2016) Robert Bogue   Sensor Review

3D-printed photo-spectroelectrochemical devices forin situandin operandoX-ray absorption spectroscopy investigation

(2016) Elisabetta Achilli et al.   JOURNAL OF SYNCHROTRON RADIATION

Organic Synthesis: March of the Machines

(2015) Steven V. Ley et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Investigation of Photon Fluxes within Microstructured Photoreactors Revealing Great Optimization Potentials

(2015) Dirk Ziegenbalg et al.   CHEMICAL ENGINEERING & TECHNOLOGY

Additive manufacturing methods and modelling approaches: a critical review

(2015) H. Bikas et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences

(2014) Bethany C. Gross et al.   ANALYTICAL CHEMISTRY

3D Printed High-Throughput Hydrothermal Reactionware for Discovery, Optimization, and Scale-Up

(2014) Philip J. Kitson et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Experimental approach of irradiation conditions for photocatalytical tests

(2014) Eike Blume et al.   CATALYSIS TODAY

Investigation of flow through a computationally generated packed column using CFD and Additive Layer Manufacturing

(2014) M.J. Baker et al.   COMPUTERS & CHEMICAL ENGINEERING

3D-printed individual labware in biosciences by rapid prototyping: In vitro biocompatibility and applications for eukaryotic cell cultures

(2014) Tim H. Lücking et al.   ENGINEERING IN LIFE SCIENCES

3D printed modules for integrated microfluidic devices

(2014) Kyoung G. Lee et al.   RSC Advances

3D-printed devices for continuous-flow organic chemistry

(2013) Vincenza Dragone et al.   Beilstein Journal of Organic Chemistry

Intensification of the Sasol SPD Reactor — Realizing Potential

(2013) Alex P. Vogel et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Combining 3D printing and liquid handling to produce user-friendly reactionware for chemical synthesis and purification

(2013) Philip J. Kitson et al.   Chemical Science

Shape-selective growth of silver nanoparticles under continuous flow photochemical conditions

(2012) Simone Silvestrini et al.   CHEMICAL COMMUNICATIONS

Configurable 3D-Printed millifluidic and microfluidic ‘lab on a chip’ reactionware devices

(2012) Philip J. Kitson et al.   LAB ON A CHIP

Integrated 3D-printed reactionware for chemical synthesis and analysis

(2012) Mark D. Symes et al.   Nature Chemistry

Silver as an Example of the Applications of Photochemistry to the Synthesis and Uses of Nanomaterials†,‡

(2012) Kevin G. Stamplecoskie et al.   PHOTOCHEMISTRY AND PHOTOBIOLOGY

A review on stereolithography and its applications in biomedical engineering

(2010) Ferry P.W. Melchels et al.   BIOMATERIALS

Au/Ag/Au double shell nanoparticles with narrow size distribution obtained by continuous micro segmented flow synthesis

(2010) A. Knauer et al.   CHEMICAL ENGINEERING JOURNAL

Transition metal nanoparticle catalysis in green solvents

(2010) Ning Yan et al.   COORDINATION CHEMISTRY REVIEWS

Photocatalytic Degradation of Methylene Blue Dye Using Ultraviolet Light Emitting Diodes

(2009) Rajesh J. Tayade et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Noble Metals on the Nanoscale: Optical and Photothermal Properties and Some Applications in Imaging, Sensing, Biology, and Medicine

(2008) Prashant K. Jain et al.   ACCOUNTS OF CHEMICAL RESEARCH

Biosensing with plasmonic nanosensors

(2008) Jeffrey N. Anker et al.   NATURE MATERIALS