Defect Characterization Based on Eddy Current Technique: Technical Review
Published 2014 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Defect Characterization Based on Eddy Current Technique: Technical Review
Authors
Keywords
-
Journal
Advances in Mechanical Engineering
Volume 6, Issue -, Pages 182496
Publisher
SAGE Publications
Online
2014-08-29
DOI
10.1155/2014/182496
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- An SVM approach with electromagnetic methods to assess metal plate thickness
- (2014) Helena G. Ramos et al. MEASUREMENT
- Surface profiling with high density eddy current non-destructive examination data
- (2014) Shaddy Shokralla et al. NDT & E INTERNATIONAL
- Excitation current waveform for eddy current testing on the thickness of ferromagnetic plates
- (2014) Xingle Chen et al. NDT & E INTERNATIONAL
- Evaluation of an EMAT–EC dual probe in sizing extent of wall thinning
- (2014) Tetsuya Uchimoto et al. NDT & E INTERNATIONAL
- Finite element modeling of second layer crack detection in aircraft bolt holes with ferrous fasteners present
- (2014) V.K. Babbar et al. NDT & E INTERNATIONAL
- An approach to reduce lift-off noise in pulsed eddy current nondestructive technology
- (2014) Yating Yu et al. NDT & E INTERNATIONAL
- Quantitative non-destructive evaluation method for impact damage using eddy current pulsed thermography
- (2013) Wenwei Ren et al. COMPOSITES PART B-ENGINEERING
- Non-destructive testing of low-energy impact in CFRP laminates and interior defects in honeycomb sandwich using scanning pulsed eddy current
- (2013) Yunze He et al. COMPOSITES PART B-ENGINEERING
- Methodology of short fatigue crack detection by the eddy current method in a multi-layered metal aircraft structure
- (2013) Marie Bohacova ENGINEERING FAILURE ANALYSIS
- Assessment of equivalent initial flaw size estimation methods in fatigue life prediction using compact tension specimen tests
- (2013) A.R. Shahani et al. ENGINEERING FRACTURE MECHANICS
- 3D vs. 2D fatigue crack initiation and propagation in notched plates
- (2013) C. Navarro et al. INTERNATIONAL JOURNAL OF FATIGUE
- Eddy current nondestructive evaluation of dual phase steel
- (2013) Sadegh Ghanei et al. MATERIALS & DESIGN
- Discussion on modeling of thermal fatigue cracks in numerical simulation based on eddy current signals
- (2013) Jing Wang et al. NDT & E INTERNATIONAL
- Pulsed eddy current detection of cracks in F/A-18 inner wing spar without wing skin removal using Modified Principal Component Analysis
- (2013) P. Horan et al. NDT & E INTERNATIONAL
- An arrayed uniform eddy current probe design for crack monitoring and sizing of surface breaking cracks with the aid of a computational inversion technique
- (2013) Noritaka Yusa et al. NDT & E INTERNATIONAL
- Investigation of thermal imaging sampling frequency for eddy current pulsed thermography
- (2013) Jia Liu et al. NDT & E INTERNATIONAL
- Manufacturing of representative axial stress corrosion cracks in tube specimens for eddy current testing
- (2013) Chi Bum Bahn et al. NUCLEAR ENGINEERING AND DESIGN
- Development of wall thinning screening system and its application to a commercial nuclear power plant
- (2013) Kyung Ha Ryu et al. NUCLEAR ENGINEERING AND DESIGN
- Geometric optimization of a differential planar eddy currents probe for non-destructive testing
- (2013) Luis S. Rosado et al. SENSORS AND ACTUATORS A-PHYSICAL
- Defect classification by pulsed eddy current technique in con-casting slabs based on spectrum analysis and wavelet decomposition
- (2013) Xuanbing Qiu et al. SENSORS AND ACTUATORS A-PHYSICAL
- On the application of a micromechanical small fatigue crack growth model to predict fretting fatigue life in AA7075-T6 under spherical contact
- (2013) F. Aguirre et al. TRIBOLOGY INTERNATIONAL
- On the prediction of fatigue life in double shear lap joints including interference fitted pin
- (2012) T.N. Chakherlou et al. ENGINEERING FRACTURE MECHANICS
- A differential planar eddy currents probe: Fundamentals, modeling and experimental evaluation
- (2012) Luis S. Rosado et al. NDT & E INTERNATIONAL
- Measurement of electromagnetic properties of heat exchanger tubes
- (2012) Evgueni Todorov NDT & E INTERNATIONAL
- Eddy current probes of inclined coils for increased detectability of circumferential cracks in tubing
- (2012) Young-Joo Kim et al. NDT & E INTERNATIONAL
- Extension of a model for eddy current inspection of cracks to pulsed excitations
- (2012) Theodoros Theodoulidis et al. NDT & E INTERNATIONAL
- 3D EC-GMR sensor system for detection of subsurface defects at steel fastener sites
- (2012) G. Yang et al. NDT & E INTERNATIONAL
- Development of a very fast simulator for pulsed eddy current testing signals of local wall thinning
- (2012) Shejuan Xie et al. NDT & E INTERNATIONAL
- Assessment of wall thinning in insulated ferromagnetic pipes using the time-to-peak of differential pulsed eddy-current testing signals
- (2012) Zhiyuan Xu et al. NDT & E INTERNATIONAL
- Defect characterisation using pulsed eddy current thermography under transmission mode and NDT applications
- (2012) Mengchun Pan et al. NDT & E INTERNATIONAL
- Eddy-current induced thermography—probability of detection study of small fatigue cracks in steel, titanium and nickel-based superalloy
- (2012) Ben Weekes et al. NDT & E INTERNATIONAL
- A novel approach for measuring of thickness of induction hardened layers based on the eddy current method and the finite element modeling
- (2012) J.M. Szlagowska-Spychalska et al. NDT & E INTERNATIONAL
- PEC defect automated classification in aircraft multi-ply structures with interlayer gaps and lift-offs
- (2012) Yunze He et al. NDT & E INTERNATIONAL
- Fast crack profile reconstruction using pulsed eddy current signals
- (2012) Libing Bai et al. NDT & E INTERNATIONAL
- Rotating field eddy current probe with bobbin pickup coil for steam generator tubes inspection
- (2012) Junjun Xin et al. NDT & E INTERNATIONAL
- Signal processing schemes for Eddy Current Testing of steam generator tubes of nuclear power plants
- (2012) Shuxia Tian et al. NUCLEAR ENGINEERING AND DESIGN
- A new concept for steam generator tube integrity assessment
- (2012) A. Erhard et al. NUCLEAR ENGINEERING AND DESIGN
- Experimental validation of an eddy current probe dedicated to the multi-frequency imaging of bore holes
- (2012) P.-Y. Joubert et al. SENSORS AND ACTUATORS A-PHYSICAL
- Research on spectral response of pulsed eddy current and NDE applications
- (2012) Gui Yun Tian et al. SENSORS AND ACTUATORS A-PHYSICAL
- Experimental investigation and fatigue life prediction for 7475-T7351 aluminum alloy with and without shot peening-induced residual stresses
- (2011) Y.K. Gao et al. ACTA MATERIALIA
- Finite element modelling of closed cracks in eddy current testing
- (2011) Anders Rosell et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effect of initiation feature on microstructure-scale fatigue crack propagation in Al–Zn–Mg–Cu
- (2011) James T. Burns et al. INTERNATIONAL JOURNAL OF FATIGUE
- Investigation of 3D anisotropic electrical conductivity in TIG welded 5A06 Al alloy using eddy currents
- (2011) Abdul Shakoor et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A new differential eddy current testing sensor used for detecting crack extension direction
- (2011) Peng Xu et al. NDT & E INTERNATIONAL
- PEC thermography for imaging multiple cracks from rolling contact fatigue
- (2011) John Wilson et al. NDT & E INTERNATIONAL
- Eddy current analysis of mid-bore and corner cracks in bolt holes
- (2011) P.R. Underhill et al. NDT & E INTERNATIONAL
- Monitoring sandwich structured SiC ceramics integrity with electrical resistance
- (2011) Alberto Ortona et al. NDT & E INTERNATIONAL
- Combined analytical-numerical approach to the voltage of a cylindrical coil with pulsed current
- (2011) Chunyan Xiao et al. NDT & E INTERNATIONAL
- Application of time–frequency analysis for automatic hidden corrosion detection in a multilayer aluminum structure using pulsed eddy current
- (2011) Saleh Hosseini et al. NDT & E INTERNATIONAL
- Remote field eddy current testing for steam generator inspection of fast reactor
- (2011) Noriyasu Kobayashi et al. NUCLEAR ENGINEERING AND DESIGN
- Techniques for processing remote field eddy current signals from bend regions of steam generator tubes of prototype fast breeder reactor
- (2010) S. Thirunavukkarasu et al. ANNALS OF NUCLEAR ENERGY
- Estimation of pearlite fraction in ductile cast irons by eddy current method
- (2010) S. Konoplyuk NDT & E INTERNATIONAL
- Pulsed eddy current signal processing method for signal denoising in ferromagnetic plate testing
- (2010) Chen Huang et al. NDT & E INTERNATIONAL
- Fatigue-life calculations on pristine and corroded open-hole specimens using small-crack theory
- (2009) J.C. Newman Jr. et al. INTERNATIONAL JOURNAL OF FATIGUE
- Crack growth-based fatigue life prediction using an equivalent initial flaw model. Part I: Uniaxial loading
- (2009) Yibing Xiang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Crack growth-based fatigue-life prediction using an equivalent initial flaw model. Part II: Multiaxial loading
- (2009) Zizi Lu et al. INTERNATIONAL JOURNAL OF FATIGUE
- Pulsed eddy current testing with variable duty cycle on rivet joints
- (2009) Ilham Zainal Abidin et al. NDT & E INTERNATIONAL
- A novel feature extraction for eddy current testing of steam generator tubes
- (2009) Nam H. Jo et al. NDT & E INTERNATIONAL
- Pulsed eddy current technique for defect detection in aircraft riveted structures
- (2009) Yunze He et al. NDT & E INTERNATIONAL
- A case study on detection and sizing of defects in steam generator tubes using eddy current testing
- (2009) Do Haeng Hur et al. NUCLEAR ENGINEERING AND DESIGN
- Defect classification based on rectangular pulsed eddy current sensor in different directions
- (2009) Yunze He et al. SENSORS AND ACTUATORS A-PHYSICAL
- Fatigue limit prediction of notched components using short crack growth theory and an asymptotic interpolation method
- (2008) Yongming Liu et al. ENGINEERING FRACTURE MECHANICS
- A combined wear and crack nucleation–propagation methodology for fretting fatigue prediction
- (2008) J MADGE et al. INTERNATIONAL JOURNAL OF FATIGUE
- Discussion on the equivalent conductivity and resistance of stress corrosion cracks in eddy current simulations
- (2008) Noritaka Yusa et al. NDT & E INTERNATIONAL
- Characterization of pitting damage and prediction of remaining fatigue life
- (2007) K VANDERWALDE et al. INTERNATIONAL JOURNAL OF FATIGUE
- Pearlite determination in plain carbon steel by eddy current method
- (2007) S.H. Khan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Removing Eddy-Current probe wobble noise from steam generator tubes testing using Wavelet Transform
- (2007) L.A.N.M. Lopez et al. PROGRESS IN NUCLEAR ENERGY
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started