Mechanism of cycling degradation and strategy to stabilize a nickel-rich cathode

N-Allyl-N,N-Bis(trimethylsilyl)amine as a Novel Electrolyte Additive To Enhance the Interfacial Stability of a Ni-Rich Electrode for Lithium-Ion Batteries

(2018) Qinfeng Zheng et al.   ACS Applied Materials & Interfaces

Deterioration mechanism of LiNi0.8Co0.15Al0.05O2/graphite–SiOx power batteries under high temperature and discharge cycling conditions

(2018) Cheng Liu et al.   Journal of Materials Chemistry A

Significantly improving cycling performance of cathodes in lithium ion batteries: The effect of Al 2 O 3 and LiAlO 2 coatings on LiNi 0.6 Co 0.2 Mn 0.2 O 2

(2018) Wen Liu et al.   Nano Energy

Enhancing electrochemical performance of Li/LiMn2O4 cell at elevated temperature by tailoring cathode interface via diethyl phenylphosphonite (DEPP) incorporation

(2017) Bo Liao et al.   JOURNAL OF APPLIED ELECTROCHEMISTRY

Operando Monitoring of Early Ni-mediated Surface Reconstruction in Layered Lithiated Ni–Co–Mn Oxides

(2017) Daniel Streich et al.   Journal of Physical Chemistry C

Maintaining structural integrity of 4.5 V lithium cobalt oxide cathode with fumaronitrile as a novel electrolyte additive

(2017) Xianshu Wang et al.   JOURNAL OF POWER SOURCES

Oxygen Release and Its Effect on the Cycling Stability of LiNi x Mn y Co z O 2 (NMC) Cathode Materials for Li-Ion Batteries

(2017) Roland Jung et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

The Impact of Electrolyte Additives and Upper Cut-off Voltage on the Formation of a Rocksalt Surface Layer in LiNi 0.8 Mn 0.1 Co 0.1 O 2 Electrodes

(2017) Jing Li et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

A dual-functional gel-polymer electrolyte for lithium ion batteries with superior rate and safety performances

(2017) Xilin Li et al.   Journal of Materials Chemistry A

Electrolyte additive enabled fast charging and stable cycling lithium metal batteries

(2017) Jianming Zheng et al.   Nature Energy

Suppressing the Phase Transition of the Layered Ni-Rich Oxide Cathode during High-Voltage Cycling by Introducing Low-Content Li2MnO3

(2016) Jun Yang et al.   ACS Applied Materials & Interfaces

Application of tris(trimethylsilyl)borate to suppress self-discharge of layered nickel cobalt manganese oxide for high energy battery

(2016) Xiaolin Liao et al.   APPLIED ENERGY

Electrocatalysis Paradigm for Protection of Cathode Materials in High-Voltage Lithium-Ion Batteries

(2016) Ilya A. Shkrob et al.   Journal of Physical Chemistry C

A study of methyl phenyl carbonate and diphenyl carbonate as electrolyte additives for high voltage LiNi 0.8 Mn 0.1 Co 0.1 O 2 /graphite pouch cells

(2016) Wenda Qiu et al.   JOURNAL OF POWER SOURCES

Triethylborate as an electrolyte additive for high voltage layered lithium nickel cobalt manganese oxide cathode of lithium ion battery

(2016) Zaisheng Wang et al.   JOURNAL OF POWER SOURCES

Improving the electrochemical performance of high voltage spinel cathode at elevated temperature by a novel electrolyte additive

(2016) Jiahui Chen et al.   JOURNAL OF POWER SOURCES

Understanding the effects of a multi-functionalized additive on the cathode–electrolyte interfacial stability of Ni-rich materials

(2016) Taeeun Yim et al.   JOURNAL OF POWER SOURCES

Influence of electrolyte additives on the cathode electrolyte interphase (CEI) formation on LiNi 1/3 Mn 1/3 Co 1/3 O 2 in half cells with Li metal counter electrode

(2016) Yunxian Qian et al.   JOURNAL OF POWER SOURCES

Transition metal dissolution and deposition in Li-ion batteries investigated by operando X-ray absorption spectroscopy

(2016) Johannes Wandt et al.   Journal of Materials Chemistry A

Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives

(2016) Seung-Taek Myung et al.   ACS Energy Letters

Tunable and Robust Phosphite-Derived Surface Film to Protect Lithium-Rich Cathodes in Lithium-Ion Batteries

(2015) Jung-Gu Han et al.   ACS Applied Materials & Interfaces

Unraveling the Degradation Process of LiNi0.8Co0.15Al0.05O2 Electrodes in Commercial Lithium Ion Batteries by Electronic Structure Investigations

(2015) Karin Kleiner et al.   ACS Applied Materials & Interfaces

Activation Mechanism of LiNi0.80Co0.15Al0.05O2: Surface and Bulk Operando Electrochemical, Differential Electrochemical Mass Spectrometry, and X-ray Diffraction Analyses

(2015) Rosa Robert et al.   CHEMISTRY OF MATERIALS

A combination of lithium difluorophosphate and vinylene carbonate as reducible additives to improve cycling performance of graphite electrodes at high rates

(2015) Ko-Eun Kim et al.   ELECTROCHEMISTRY COMMUNICATIONS

Effects of fluorine doping on structure, surface chemistry, and electrochemical performance of LiNi0.8Co0.15Al0.05O2

(2015) Xiang Li et al.   ELECTROCHIMICA ACTA

A novel electrolyte additive for improving the interfacial stability of high voltage lithium nickel manganese oxide cathode

(2015) Wenna Huang et al.   JOURNAL OF POWER SOURCES

Improving cyclic stability of lithium nickel manganese oxide cathode at elevated temperature by using dimethyl phenylphosphonite as electrolyte additive

(2015) Shaowei Mai et al.   JOURNAL OF POWER SOURCES

Significantly improved cyclability of lithium manganese oxide under elevated temperature by an easily oxidized electrolyte additive

(2015) Yunmin Zhu et al.   JOURNAL OF POWER SOURCES

Why is tris(trimethylsilyl) phosphite effective as an additive for high-voltage lithium-ion batteries?

(2015) Young-Kyu Han et al.   Journal of Materials Chemistry A

Synthesis of Mg-doped LiNi0.8Co0.15Al0.05O2 oxide and its electrochemical behavior in high-voltage lithium-ion batteries

(2014) Bin Huang et al.   CERAMICS INTERNATIONAL

Electrolytes and Interphases in Li-Ion Batteries and Beyond

(2014) Kang Xu   CHEMICAL REVIEWS

Fabrication of LiCoO2 Crystal Layers Using a Flux Method and Their Application for Additive-Free Lithium-Ion Rechargeable Battery Cathodes

(2014) Yusuke Mizuno et al.   CRYSTAL GROWTH & DESIGN

Enhanced elevated-temperature performance of Li(Ni0.8Co0.15Al0.05)O2 electrodes coated with Li2O-2B2O3 glass

(2014) Sung Nam Lim et al.   ELECTROCHIMICA ACTA

Improving cyclic stability of lithium nickel manganese oxide cathode for high voltage lithium ion battery by modifying electrode/electrolyte interface with electrolyte additive

(2014) Bin Li et al.   ELECTROCHIMICA ACTA

2D Raman correlation analysis of formation mechanism of passivating film on overcharged LiCoO2 electrode with additive system

(2014) Yeonju Park et al.   JOURNAL OF MOLECULAR STRUCTURE

Self-discharge suppression of 4.9 V LiNi 0.5 Mn 1.5 O 4 cathode by using tris(trimethylsilyl)borate as an electrolyte additive

(2014) Xiaolin Liao et al.   JOURNAL OF POWER SOURCES

Improved electrolyte and its application in LiNi1/3Mn1/3Co1/3O2–Graphite full cells

(2014) Minghong Liu et al.   JOURNAL OF POWER SOURCES

Capacity fade of LiAlyNi1−x−yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (surface analysis of LiAlyNi1−x−yCoxO2 cathode after cycle tests in restricted depth of discharge ranges)

(2014) Shoichiro Watanabe et al.   JOURNAL OF POWER SOURCES

A facile process for coating amorphous FePO4 onto LiNi0.8Co0.15Al0.05O2 and the effects on its electrochemical properties

(2014) Bin Huang et al.   MATERIALS LETTERS

A multifunctional phosphite-containing electrolyte for 5 V-class LiNi0.5Mn1.5O4 cathodes with superior electrochemical performance

(2014) Young-Min Song et al.   Journal of Materials Chemistry A

Improvement of cycle stability for high-voltage lithium-ion batteries by in-situ growth of SEI film on cathode

(2014) Jingjing Xu et al.   Nano Energy

Electrochemical performance of high-capacity nanostructured Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material for lithium ion battery by hydrothermal method

(2013) Xin Wei et al.   ELECTROCHIMICA ACTA

Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application

(2013) Xifei Li et al.   Energy & Environmental Science

Why Do Sulfone-Based Electrolytes Show Stability at High Voltages? Insight from Density Functional Theory

(2013) Yating Wang et al.   Journal of Physical Chemistry Letters

Trimethyl phosphite as an electrolyte additive for high-voltage lithium-ion batteries using lithium-rich layered oxide cathode

(2013) Z.D. Li et al.   JOURNAL OF POWER SOURCES

Improvement of long-term cycling performance of Li[Ni0.8Co0.15Al0.05]O2 by AlF3 coating

(2013) Sang-Hyuk Lee et al.   JOURNAL OF POWER SOURCES

Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries

(2013) Hyung-Joo Noh et al.   JOURNAL OF POWER SOURCES

A rocking chair type all-solid-state lithium ion battery adopting Li2O–ZrO2 coated LiNi0.8Co0.15Al0.05O2 and a sulfide based electrolyte

(2013) Seitaro Ito et al.   JOURNAL OF POWER SOURCES

Significant impact on cathode performance of lithium-ion batteries by precisely controlled metal oxide nanocoatings via atomic layer deposition

(2013) Xifei Li et al.   JOURNAL OF POWER SOURCES

Voltage Fade of Layered Oxides: Its Measurement and Impact on Energy Density

(2013) Martin Bettge et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Understanding the Degradation Mechanisms of LiNi0.5 Co0.2 Mn0.3 O2 Cathode Material in Lithium Ion Batteries

(2013) Sung-Kyun Jung et al.   Advanced Energy Materials

A novel electrolyte with the ability to form a solid electrolyte interface on the anode and cathode of a LiMn2O4/graphite battery

(2013) Bin Li et al.   Journal of Materials Chemistry A

Thermodynamic description of the LiNiO2–NiO2 pseudo-binary system and extrapolation to the Li(Co,Ni)O2–(Co,Ni)O2 system

(2012) Keke Chang et al.   CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY

Critical Role of Oxygen Evolved from Layered Li–Excess Metal Oxides in Lithium Rechargeable Batteries

(2012) Jihyun Hong et al.   CHEMISTRY OF MATERIALS

First-principles and experimental investigation of the morphology of layer-structured LiNiO2 and LiCoO2

(2012) Yongseon Kim et al.   JOURNAL OF MATERIALS CHEMISTRY

Influence of electrode preparation on the electrochemical performance of LiNi0.8Co0.15Al0.05O2 composite electrodes for lithium-ion batteries

(2012) Hai Yen Tran et al.   JOURNAL OF POWER SOURCES

Effect of Mg-doping on the degradation of LiNiO2-based cathode materials by combined spectroscopic methods

(2012) Shunsuke Muto et al.   JOURNAL OF POWER SOURCES

Enhanced storage property of LiNi0.8Co0.15Al0.05O2 coated with LiCoO2

(2012) Wanmin Liu et al.   JOURNAL OF POWER SOURCES

3-Hexylthiophene as a Stabilizing Additive for High Voltage Cathodes in Lithium-Ion Batteries

(2012) Ali Abouimrane et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Structural evolution and the capacity fade mechanism upon long-term cycling in Li-rich cathode material

(2012) Bohang Song et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Surface coating of LiNi0.8Co0.15Al0.05O2 with LiCoO2 by a molten salt method

(2012) Wanmin Liu et al.   SURFACE & COATINGS TECHNOLOGY

Neutron and X-ray Diffraction Study of Pyrophosphate-Based Li2–xMP2O7(M = Fe, Co) for Lithium Rechargeable Battery Electrodes

(2011) Hyungsub Kim et al.   CHEMISTRY OF MATERIALS

Experimental and Theoretical Investigations of Dimethylacetamide (DMAc) as Electrolyte Stabilizing Additive for Lithium Ion Batteries

(2011) Mengqing Xu et al.   Journal of Physical Chemistry C

Molecular Dynamics Simulation Studies of the Structure of a Mixed Carbonate/LiPF6 Electrolyte near Graphite Surface as a Function of Electrode Potential

(2011) Jenel Vatamanu et al.   Journal of Physical Chemistry C

Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. I. Experimental investigation

(2011) D. Andre et al.   JOURNAL OF POWER SOURCES

Ni3(PO4)2-coated Li[Ni0.8Co0.15Al0.05]O2 lithium battery electrode with improved cycling performance at 55°C

(2011) Dong-Ju Lee et al.   JOURNAL OF POWER SOURCES

Synthesis and electrochemical properties of LiNi0.8Co0.15Al0.05O2 prepared from the precursor Ni0.8Co0.15Al0.05OOH

(2011) Guorong Hu et al.   JOURNAL OF POWER SOURCES

LiNi0.8Co0.15Al0.05O2 cathode materials prepared by TiO2 nanoparticle coatings on Ni0.8Co0.15Al0.05(OH)2 precursors

(2010) Younghyun Cho et al.   ELECTROCHIMICA ACTA

Research progress in high voltage spinel LiNi0.5Mn1.5O4 material

(2010) R. Santhanam et al.   JOURNAL OF POWER SOURCES

Inorganic additives for passivation of high voltage cathode materials

(2010) Li Yang et al.   JOURNAL OF POWER SOURCES

Significant Improvement of LiNi[sub 0.8]Co[sub 0.15]Al[sub 0.05]O[sub 2] Cathodes at 60°C by SiO[sub 2] Dry Coating for Li-Ion Batteries

(2010) Yonghyun Cho et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Inhibition of Electrolyte Oxidation in Lithium Ion Batteries with Electrolyte Additives

(2009) Li Yang et al.   ELECTROCHEMICAL AND SOLID STATE LETTERS

Bulk and surface structure investigation for the positive electrodes of degraded lithium-ion cell after storage test using X-ray absorption near-edge structure measurement

(2008) Daisuke Mori et al.   JOURNAL OF POWER SOURCES

The Effect of Vinylene Carbonate Additive on Surface Film Formation on Both Electrodes in Li-Ion Batteries

(2008) L. El Ouatani et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Local atomic and electronic structures around Mg and Al dopants inLiNiO2electrodes studied by XANES and ELNES and first-principles calculations

(2008) Kazuyoshi Tatsumi et al.   PHYSICAL REVIEW B

Synthesis and electrochemical properties of submicron LiNi0.8Co0.2O2 by a polymer-pyrolysis method

(2007) Lifen Xiao et al.   ELECTROCHIMICA ACTA